• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.279-286
• /
• 1998

Fatigue crack propagation behavior for variable load in high strength aluminum alloys was investigated in this study. The materials used in this study are aluminum 7075-T651 and 5052-H32 alloys. Crack length was measured from calibration curve, which was plotted by known crack length and resistance of standard specimens. Load was obtained from linear regression formula. Unloading elastic compliance method was ap;ied to check the crack closure and cracked area.

• The Journal of Korean Physical Therapy
• /
• 제26권5호
• /
• pp.280-289
• /
• 2014

Purpose: This study was conducted in order to determine the stimulation variables which should be considered when neuromuscular electrical stimulation (NMES) is applied for a muscle under the normal innervation to minimize muscle fatigue and increase force-generating ability. Methods: A total of 23 healthy men participated in the study and all subjects were randomly assigned to the 1:1 group, 1:3 group, 1:5 group, and control group with on-off ratio of NMES. The subjects performed a fatigue task, consisting of 10 times of isometric contraction sustained by NMES. NMES using Russian current stimulation was applied to muscle fatigue and divided into three sessions by pulse frequency (10 bps, 30 bps, 90 bps). The EMG was recorded using an MP 100 system from the quadriceps femoris muscle in four groups. Results: The differences of delta MdF and delta MF of between on-off ratio groups of 10 bps, 30 bps, and 90 bps pulse frequencies were very significant (p<0.05). According to the results of post hoc of 10, 90 bps, it was greater in the 1:1 group and the 1:3 group compared with the 1:5 group, and no fatigue was observed in the control group. In 30 bps, it was greater in the 1:1 group compared with 1:3, 1:5, and control group (p<.05). Conclusion: Among NMES variables to minimize muscle fatigue, the larger on-off ratio by pulse frequency showed the lower muscle fatigue. Therefore, on-off ratio needs to be great enough, and will be more efficient with the frequency 30 bps rather than of 10 bps and 90 bps.

• 대한간호학회지
• /
• 제28권4호
• /
• pp.908-919
• /
• 1998

The purpose of this study was to get some basic data for health care for working women, especially or hospital nurses. The number of subjects was 796 nurses from one general hospital and four private educational hospitals. The data were collected from February to April, 1988 using the questionnaire "Symptom Table on Fatigue Perception" designed by the Research Committee of Industrial Fatigue in Hygienic Association of Japan Industry. The collected data were analyzed using means and standard deviations for the subjective symptoms of fatigue and each item as an independent variable was analyzed by T-test and ANOVA test. The results are as follows 1) The mean score for degree of fatigue was 1.89 and the degree of fatigue for physical symptoms had highest score of 2.04, the next was psychological symptoms at 1.89, and neuro -sensory symptoms were the lowest at 1.74. Among the fatigue symptoms, the item scored most frequently was "Legs feel heavy" with a mean score of 2.40 and the least frequent item was "My hand and foot trembled" with a mean score of 1.40. 2) With the respect to the general characteristics of subjects, there were statistically significant difference according to age (F=17.039, p=.000), state of marriage(t=5.381, p=.000) presence of children(t=5.134, p=.000), clinical experience (F=16.663, p= .000), present position(F=18.204, p=.000), working place(F=12.598, p=.000), duty time(F=9.068, p=.000), monthly wages(F=7.361, p=.000). satisfaction about the pay and treatment at work(t=-5.511, p=.000), relation the doctors(t=-4.593, p=.000) the doctors(t=-4.593, p=.000)

• 한국안전학회지
• /
• 제29권6호
• /
• pp.81-86
• /
• 2014

Composite materials have high specific stiffness, specific strength than existing concrete or steel materials. It has superior dynamic properties when utilizing advantages of material such as Non-corrosive, light weight, non-conducting and it has superior mold ability which can make variable shapes. Thus, in the construction, for using composite materials as construction materials, the study carried out static strength of fiber right angle direction and fatigue performance of FRP deck member. The study is going to deduct S-N curve by analyzing the results comparatively and estimate long-term durability. From now on, the study is going to provide interpretation of FRP member and basic data of design basis, furthermore providing foundation technique of composite materials' application of structural frame is the goal of this study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.829-832
• /
• 1997

It is difficult to explain the effects of complex variable loading experienced by the machine and the structure only with the studies of the single-overload itself. Hence, it is thought that the variation of overload-holding time are required to explain the effects more clearly. The effects of the overload were analyzed by means of the crack retardation, and the fractography on retardation zone. A characteristic of the fractography on retardation zone was that striation distribution did not appear due to decreased crack driving force. Rotary bending fatigue tests were performed with the circular shaft which has two hole defects.

• 대한인간공학회지
• /
• 제18권1호
• /
• pp.55-69
• /
• 1999

It is very common to use the powered hand tools to enhance the productivity in various types of industry. But the use of the powered hand tools could cause health problems such as cumulative trauma disorders and vibration white fingers. In this study. the effects of hand-arm vibration and anatomical hand position on localized muscle fatigue were analyzed. Eight healthy male subjects volunteered for the study. Vibration frequencies of 0, 40, 80, 100, 150, and 200Hz and hand position of flexion and ulnar deviation were selected for the independent variables of the experiment. Median frequency shifting was used as a dependent variable. The results indicated that at the vibration frequency of 40Hz and accelation of 2g, the muscle fatigue was the greatest. For the hand position. there was significant difference between neutral and flexion. and neutral and ulnar deviation, but no difference between flexion and ulnar deviation. These results could be applied in designing powered hand tools to minimize the health problems.

• 한국해양공학회지
• /
• 제8권2호
• /
• pp.115-123
• /
• 1994

Under variable amplitude loading conditions, retardation or accelerated condition of fatigue crack growth occurs with every cycle, Because fatigue crack growth behavior varied depend on load time history. The modeling of stress amplitude with storm loading acted to ships and offshore structures applied this paper. The crack closure behavior examine by recording the variation in load-strain relationship. By taking process mentioned above, fatigue crack growth rate, crack length, stress intensity factor, and crack closure stress intensity factor were obtained from the stress cycles of each type of storm ; A(6m), B(7m), C(8m), D(9m), E(11m) and F(15m) which was wave height. It showed that the good agreement with between the experiment results and simulation of storm loads. So this estimated method of crack propagtion rate gives a good criterion for the safe design of vessels and marine structure.

• 한국학교보건학회지
• /
• 제19권1호
• /
• pp.79-88
• /
• 2006

Purpose : To identify general characteristics of school personnel with recent fatigue which was the most frequent symptom among subjective symptoms and to explore fatigue-related factors by evaluating physical and perceived health status, life style, and symptoms through data mining techniques. Methods : We collected a data of the 1,147(male 545, female 602) who were elementary, middle, or high school personnel, answered a questionnaire, and received physical examination in Seoul School Health Center from September to November in 2000. And we investigated the differences between fatigue group and non-fatigue group for demographic characteristics, physical health status, perceived health status, symptoms, and laboratory values by frequency, chi-square test, t-test, or simple logistic regression analysis by SAS package 8.1, and then selected significant variables as input variables of a decision tree analysis of CART model by SAS E-miner. Results : In general characteristics, the fatigue consisted of 41.1%(male 35.2%, female 46.4%) among 1,147 school personnel. In classical statistics, factors related with fatigue were female, lower means of systolic and diastolic pressure, young age, personnel in middle school, irregular eating habit, no exercise a week or less than 30minutes exercise a day, perception of unhealthy status, and subjective symptoms including short of breath at exercise. In simple logistic regression to examine the relationship between selected independent variables and fatigue as a dependent variable, the odds ratio of gender (female vs male) was 1.58 times, and young age ( 20s vs 60s) 20.67 times, and middle vs high school personnel 1.86 times. However, we mined combined several characteristics by SAS-E miner. In CART model, if health perception was healthy, and age was >= 37.5 years, the proportion of the fatigue was only 19.3%. but if health perception was not healthy and symptom was severe 'short of breath' during exercise and age was < 53.5 years, and BMI was >= 22.69, the proportion of the fatigue was up to 84.8%. Conclusions : The fatigue consisted of 41.1%(male 35.2%, female 46.4%). In classical statistics, fatigue-related factors among school personnel were young age, female gender, perceived unhealthy status, subjective physical symptoms, poor life-style, and lower blood pressure rather than only physical health status. However, in data mining, if health perception was healthy and age was >= 37.5 years, the proportion of the fatigue was only 19.3%. but if health perception was not healthy and symptom was severe 'short of breath' during exercise and age was < 53.5 years, and BMI was >= 22.69, the proportion of the fatigue was up to 84.8%.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.919-926
• /
• 2002

In this study, the numerical prediction of the thermal fatigue lie? of a $\mu$BGA (Micro Ball Grid Array) solder joint was focused. Numerical method was performed using the three-dimensional finite element analysis for various solder alloys such as Sn-37%Pb, Sn-3.5%Ag, Sn-3.5%Ag-0.7%Cu and Sn-3.5%Ag-3%In-0.5%Bi during a given thermal cycling. Strain values obtained by the result of mechanical fatigue tests for solder alloys, were used to predict the solder joint fatigue life using the Coffin-Manson equation. The numerical results showed that Sn-3.5%Ag with the 50-degree ball shape geometry had the longest thermal fatigue life in low cycle fatigue. A practical correlation for the prediction of the thermal fatigue life was also suggested by using the dimensionless variable γ. Additionally Sn-3.5Ag-0.75Cu and Sn-2.0Ag-0.5Cu-2.0Bi were applied to 6$\times$8$\mu$BGA obtained from the 63Sn-37Pb Solder. This 6$\times$8$\mu$BGA were tested at different aging conditions at 130$\^{C}$, 150$\^{C}$, 170$\^{C}$ for 300, 600 and 900 hours. Thickness of the intermetallic compound layer was measured thor each condition and the activation energy thor their growth was computed. The fracture surfaces were analyzed using SEM (Scanning Electron Microscope) with EDS ( Energy Dispersive Spectroscopy).

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1085-1090
• /
• 2011

철도차량의 안전성을 확보하기위해서는 견인성능 및 속도의 변동성을 고려하여 감속기의 피로해석에 관한 연구를 수행하는 것이 중요하다. 본 논문은 고속철도차량 감속기 기어의 변동하중하에서 피로파괴에 대하여 준정적 유한요소해석과 선형 Miner's Rule에 의한 내구성해석을 수행하였다. 해석을 위한 변동하중이력은 열차견인성능곡선과 상업운전조건에서 운전선도를 기초로 MSC.ADAMS의 동역학 해석에 의하여 구축하였다. 또한 감속기 피로수명은 기어표면의 침탄부 효과를 고려한 유한요소모델을 사용하여 변형률-수명접근법에 의하여 예측하였다. 해석결과로부터 급출발에 의한 빈번한 높은 기동토크와 정차역수의 증가는 철도차량 감속기 기어수명을 감소시킴을 알 수 있었다.