• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.8-12
• /
• 2000

The fatigue crack propagation tests were performed in triangular and holding-time stress waveforms at $650^{\circ}C$. The behavior of fatigue crack propagation was investigated according to waveform. The analysis of high temperature fatigue crack propagation by the stress intensity factor range ${\Delta}K$, elastic fracture mechanics parameter, was not available. The behaviors of high temperature fatigue crack propagation by the J-integral(${\Delta}J_f$, J' and ${\Delta}J_c$), elasto-plastic fracture mechanics parameter, were investigated in a number of stress waveforms. The fast-fast waveform exhibited cycle-dependent(fatigue type), the slow-fast and the hold time with 500sec waveforms appear to be time-dependent(creep type) and the fast-slow and the hold time with 5, 25sec waveforms exhibited conbined behavior of both types(fatigue-creep conbined type).

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.65-73
• /
• 2001

This paper is a study on the fatigue analysis using BS5400 Part10(1980), code of practice for fatigue for a double link type level luffing jib crane which has been operated since the crane was built in 1985 at a domestic pier. South Korea. In addition, on the basis of the design lift due to fatigue analysis and the number of cracks detected from the nondestructive test the structural reliability and the residual life of the crane is predicted by evaluating the expected development of detectable fatigue oracle during the next five to ten years using Paris's Law for predicting fatigue crack growth and Gaussian probability density function to be reasonable for stress ranges below the mean values determined by laboratory tests. The statistical data used for the analysis of the structural reliability and life expectancy is given in the above referred code.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.41-48
• /
• 1999

The fatigue life tests were performed in strain control with triangular and hole-time wave-forms at $650^{\circ}C$. The fatigue lifes were investigated according to waveform examining damage mechanisms, which could be used to predict the fatigue life and estimate the remaining life. The results obtained are as follows; The fatigue lifes were in order of the fast-fast>the fast-slow>the slow-fast in the triangular waveforms, and the fatigue lifes in slow-fast waveforms got shorter in the hold-time waveforms. The damage mechanisms of the fracture surfaces were transgranular fracture in the fast-fast, the fast-slow waveforms and intergranular fracture in the slow-fast waveform.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.234-241
• /
• 2000

Stress analysis of the bogie frame by using the finite element method has been performed for the various loading conditions according to the results of vehicle dynamics analysis. Multiaxial fatigue analysis methods such as signed von Mises method, and typical critical plane theories were reviewed, and margin of safety for fatigue is defined. Multiaxial fatigue analysis program to predict the margin of safety of bogie frame under non-proportional loading conditions has been developed by using a commercial command language. Fatigue analysis of bogie frame under multiaxial loading was performed through this program and finite element analysis result. The procedure developed in this study is considered to be useful for the fatigue strength analysis in preliminary design stage of railway components under multiaxial loading condition.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.1-7
• /
• 2003

In this study, CT specimens were prepared from spring steel(SPS5) processed shot peening. The fatigue crack growth tests were carried out in the environment of the room temperature md low temperature at $25^{\circ}C$, $-30^{\circ}C$, $-50^{\circ}C$, $-70^{\circ}C$ $-100^{\circ}C$ and $-150^{\circ}C$ in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range ΔKth in the early stage of fatigue crack growth (Region I) and stress intensity factor range $\Delta$K in the stable of fatigue crack growth (Region II) were decreased in proportion to descend temperature. It was shown that the fatigue resistance characteristics and fracture strength at low temperature are considerable higher than those of mom temperature in the early stage and stable of fatigue crack growth region.

• Journal of the Korean Society of Safety
• /
• v.15 no.3
• /
• pp.1-6
• /
• 2000

In fatigue crack growth test, it is important not only to analyze characteristics of fatigue crack growth but also to determine the threshold stress intensity factor, ${\Delta}K_{th}$. which is the threshold value of fatigue crack growth. Linear regression analysis using fatigue test data near the threshold is suggested to determine the ${\Delta}K_{th}$ in the standard test method but the ${\Delta}K_{th}$ can be affected by a fitting method. And there are some limitations on the linear regression analysis in the case of small number of test data near the threshold. The objective of this study is to investigate differences of the ${\Delta}K_{th}$ due to regression analysis method and to evaluate the relative error range of the ${\Delta}K_{th}$ in same fatigue crack growth test data.

• Journal of Korean Critical Care Nursing
• /
• v.13 no.2
• /
• pp.1-11
• /
• 2020

Purpose : The aim of this study was to compare shift satisfaction, sleep, fatigue, quality of life (QOL), and patient safety incidents between a newly implemented two-shift system and a traditional three-shift system. Methods : A total of 127 intensive care unit nurses (48 two-shift nurses and 79 three-shift nurses) working in a tertiary hospital in Seoul were recruited from January 1, 2017, to March 31, 2017. They completed a self-reported questionnaire about their work hours, shift satisfaction, sleep patterns, sleep quality, fatigue, QOL, and patient safety incidents in the past 2 weeks. Data were analyzed using SPSS version 23.0. Results : The two-shift group showed higher shift satisfaction scores compared with the three-shift group (6.93 vs. 4.37, p<.001). Sleep latency was shorter and sleep quality was better in the two-shift group compared with the three-shift group. There were no significant differences in other sleep parameters, fatigue, QOL, and patient safety incidents between the two groups. Conclusion : Although a two-shift system did not improve nurses' fatigue or QOL in this study, it may effectively serve as an alternative shift-work system that can increase sleep quality and shift satisfaction without increasing patient safety incidents.

• Journal of the Korean Society of Safety
• /
• v.23 no.3
• /
• pp.12-16
• /
• 2008

For industrial centrifuges, the state of their welding areas, even with a naked-eye observation, offers potential safety problems such as inconsistent bead formation. STS304, which is used mainly in centrifuges, is made of metal alloys with chrome and nickel as the main ingredients, offering excellent corrosion resistance, thermal resistance, and high strength, and thus allowing it to be used for diverse purposes. This paper conducted tensile and fatigue tests of STS304 to improve the safety of centrifuges. In the findings, for the static behavior of the STS304 material, welded specimens increased their yield and tensile strength compared with the base test specimens, but decreased their elongation ratio. Also, the data dispersion phenomenon of welded specimens remarkably increased.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.26 no.3
• /
• pp.188-196
• /
• 2019

Purpose: The purpose of this study was to investigate the relationships among fatigue, patient safety culture and safety care activities of hospital nurses, and to identify and explain factors influencing safety care activities. Methods: The research participants were 187 nurses from a urban general hospital located in Korea. Self-evaluation questionnaires were used to collect the data. Data collection was done from January 10 to 31, 2019. Data were analyzed using descriptive statistics, independent t-test, One-way ANOVA, Pearson correlation coefficients and multiple regression with the SPSS 24.0 program. Results: There were significant negative relationships between fatigue and safety care activities (r=-.22, p=.003), and significant positive relationships between patient safety culture and safety care activities (r=.22, p=.003). Factors influencing safety care activities in hospital nurses were identified as type of unit (ICU) (${\beta}=.28$), patient safety culture (${\beta}=.24$) and fatigue (${\beta}=-.19$). The explanation power of this regression model was 16% and it was statistically significant (F=8.29, p<.001). Conclusion: These results suggest the need to develop further management strategies for enhancement of safety care activities in hospital. To improve the levels of patient safety, education programs on patient safety should be developed and provided to nurses in hospitals.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.752-759
• /
• 2017

The fatigue crack growth behavior of Type 347 (S347) and Type 347N (S347N) stainless steel was evaluated under the operating conditions of a pressurized water reactor (PWR). These two materials showed different fatigue crack growth rates (FCGRs) according to the changes in dissolved oxygen content and frequency. Under the simulated PWR conditions for normal operation, the FCGR of S347N was lower than that of S347 and insensitive to the changes in PWR water conditions. The higher yield strength and better corrosion resistance of the nitrogen-alloyed Type 347 stainless steel might be a main cause of slower FCGR and more stable properties against changes in environmental conditions.