• 항공우주시스템공학회지
• /
• 제18권5호
• /
• pp.81-89
• /
• 2024

최근 위성의 임무 고도화로 인하여 안테나의 부피 및 무게가 증가하고 있으며, 높은 수납효율과 초경량화 구현이 가능한 전개형 메쉬 안테나에 대한 연구가 급증하고 있다. 전개형 메쉬 안테나는 지상에서 반복 전개 시험 및 발사 진동 환경 아래서 안테나 구조물과 메쉬 원단 간 Slip 현상이 발생하게 되어 안테나 반사면의 곡률 유지 및 OPI 유지를 실패할 수 있으며, 이는 RF 성능 및 임무 수행 능력을 저하시키는 주된 원인이 된다. 이로 인해 안테나 구조물과 메쉬 원단 간 체결기법에 대한 연구는 필수적이며, 따라서 본 연구에서는 안테나 구조물과 메쉬 원단 간 Clamping 체결기법을 제안하였다. 위 기법의 체결성을 평가하기 위해 안테나 구조물의 형태 및 체결 포인트 증분에 따라 인장시험을 진행하였으며, 각 인장시험의 결과를 분석하여 제안한 Clamping 체결기법의 유효성을 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.860-863
• /
• 2005

This work presents a study on development of a practical and quantitative technique for assessment of the structural health condition by PZT impedance-based technique associated with longitudinal wave propagation. The bolt fastening condition is adjusted by torque wrench In order to estimate the damage condition numerically, we suggest the evaluation method of impedance peak frequency shift $\Delta$F in this paper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.603-606
• /
• 2006

We present a study on the development of a practical and quantitative technique for the assessment of the structural health condition with using piezoceramic(PZT) sensors. The electro-impedance-based technique with the PZT patches is very sensitive for evaluation of the incipient and small damage in a high frequency range, and however the commonly traditional modal analysis method is effective only for considerably larger damages in low frequency range. The paper presents the technique in detecting and characterizing real-time damage on the specimen that is an aluminum plate fastened with bolts and nuts by different torques and as well a plate with a crack. By using the special arrangement of the PZT sensors, the required longitudinal wave is generated through the specimen. A large number of experiments are conducted and the different conditions of the specimens, i.e. the location and extent of loosening bolts, and the plate with a crack are simulated. respectively. Since fixing and loosening the loosened bolt is controlled by a torque wrench, we can control exactly the experiment of the different torques. Compared with the simulated healthy condition, we can find whether or not there is a damage in the specimen with using an impedance analyzer with the PZT sensors. Several indices are discussed and used for assessing the different simulated damages. As for the location of bolt loosening, the RMSD is found to be the most appropriate index for numerical assessment and as well the RMSD shows strongly linear relationship for assessing the extent of the bolt loosening, and the frequency peak shift ${\Delta}F$ is used to assess the cracked plate. The possibility of repeatability of the pristine condition signatures is also presented and the appropriate frequency range and interval are uniquely selected through large numbers of experiments.

• Ocean and Polar Research
• /
• 제42권1호
• /
• pp.77-88
• /
• 2020

This paper presents the coordinate systems used for trawl doors modeling, and provides matrix equations of connection between these systems. The projections of the forces acting on the door into axes of various coordinate systems were obtained, which were used in the door equilibrium equations. Six equilibrium conditions for the door as a solid were obtained: formulas that allow for the door area in plan to be determined; its weight in water; its mass; three moment equations for determining the position of the warp and backstrops fastening points to the door with triangular and quadrangular backstrop arrangements. It was found that the moment equilibrium equations of trawl doors are generally incompatible, which was not found by any of the authors who have previously conducted research into trawl doors. Using the Kronecker-Capelli theorem, the compatibility equation is obtained. This equation includes the coordinates of the backstrop fastening points to the door, which means that these points cannot be randomly selected. The technique of determining the warp and backstrops' fastening points position to the door is described. Conditions of directional (by angle of attack) and roll (in angle of roll) stability of the doors' equilibrium are presented. The equations presented in this paper comprise a mathematical model that allows, when designing the doors, to select optimal parameters, as well as to carry out adjustments for trawling purposes to ensure the stable movement of the doors and the entire trawl system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.870-874
• /
• 2004

This work presents a study on development of a practical and quantitative technique for assessment of the structural health condition by Piezoelectric impedance-based technique associated with longitudinal wave propagation method. The bolt fastening condition is adjusted by torque wrench. In order to estimate the damage condition numerically, three damage indices, impedance peak frequency shift ${\Delta}F$, peak amplitude ratio $\delta$ and quality factor ratio $\gamma$, are proposed in this paper. Furthermore, an assessment method is described for estimation of the damage by using these three damage indices.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.889-893
• /
• 2004

This work presents a study on development of a practical and quantitative technique for assessment of the structural health condition by piezoelectric impedance-based technique associated with longitudinal wave propagation method. The bolt fastening condition is adjusted by torque wrench. In order to estimate the damage condition numerically, three damage indices, impedance peak frequency shift ${\Delta}F$ is proposed in this paper. Furthermore, an assessment method is described for estimation of the damage by using these three damage indices.

• 복식
• /
• 제66권1호
• /
• pp.108-121
• /
• 2016

The objective of the study is to propose diverse knitwear designs by expanding the scope of the use and application of knit fabric. The study looked into diversifying the knitwear designs by using different types of zippers and with the combination of the diversity given by the zipper used in attachable and detachable method and the traditional North European knit patterns. One way of contributing to the diversity of fashion design is to use the zipper, as it can be implemented as an attachable and detachable fastening system. Also, the combination of North European traditional knit patterns with knit fabric can create a new and unique knit styling. The content of the research focuses on the history and definition of North European traditional knitwear based on the analysis of theoretical background, types, and characteristics of the knit patterns. Case studies were observed to show the application of knit patterns. The methods of the study used are preceding research along with research, collection, analysis of data, information from Korean and foreign literature, and Internet websites. During knitwear production, the two types of zippers were used in combination with four traditional Northern European knitwear Aran, Fair Isle, Nordic, and Ropy. The knitting techniques applied in the process were cable fisherman (5GG, SES 124CS) and Tubular Jacquard (3GG, 7GG, SES 122CS) for knitting machinery, and the technique of whole garment for hand knitting.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.35-42
• /
• 2019

현재 자동차 산업과 함께 발전하고 있는 전자제품을 포함하는 전반적인 제조업 분야에서 초정밀 제어를 요하는 너트 체결기가 요구되고 있고 너트 체결시의 중요한 성능 요소는 체결력 부족에 의한 풀림과 과도한 체결에 의한 파손 및 강한 진동이나 외부 충격에 강건한 체결력 유지 등 조립 품질의 유지와 향상 및 제품 수명 보장을 위해 정확한 조임 토크, 각도 등이 요구된다. 현재 너트런너라는 제품명으로 판매되는 너트 체결기는 고토크 및 정밀토크제어, 정밀 각도제어 그리고 생산량 증대를 위한 고속운전 등의 특성들이 필요하며 고출력이 가능한 BLDC모터 및 너트체결기 전용의 정교한 토크제어에 필요한 고정밀 토크제어드라이버와 고속, 저속, 고응답의 정밀 속도 제어시스템의 개발이 요청되고 있으나 현재 고객이 요구하는 고정밀, 고토크 및 고속 작업특성을 만족시키지 못하고 있다. 따라서 본 논문에서는 정확한 체결 토크 및 고속 회전에서도 저진동 및 저소음을 구현할 수 있는 d축, q축의 좌표변환에 의한 벡터제어와 토크제어기반의 BLDC모터 가변속 제어와 너트런너의 제어 기술을 제안하고 여러 실험을 통해 성능 결과를 분석하여 제안한 제어가 너트런너 성능을 만족하는지를 확인 하였다. 또한 일단 운전 체결 방식(One Stage 운전 체결 방식)으로 패턴을 프로그램하여 10,000[rpm] 고속 운전 후 목표 토크로 정확히 체결됨을 확인하였으며 토크 리플에 의한 가체결 토크 검출의 문제점도 외란관측기을 사용하여 해결하였고 실험을 통해 검증하였다.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.12-17
• /
• 2011

This paper gives a review of finite element model for the analysis of fastening as practical points of view. Different mechanical properties of plate-fastener systems are analyzed. Calculations of the system properties are described as well as the technique of their application in model. Analysis has been performed for calculating the load distribution in multi-joint and the results are compared using the several models. The effects of fastener-hole clearance on the load distribution in multifastener joints are presented. And the stress analysis method have been reviewed for failure analysis of mechanical joint of composite laminate.

• Structural Engineering and Mechanics
• /
• 제53권5호
• /
• pp.867-880
• /
• 2015

Mechanical fastening is still one of the main methods used for joining components. Different techniques have been applied to reduce the effect of stress concentration of notches like fastener holes. In this work we evaluate the feasibility of combining laser shock peening (LSP) and cold expansion to improve fatigue crack initiation and propagation of open hole specimens made of 6061-T6 aluminum alloy. LSP is a new and competitive technique for strengthening metals, and like cold expansion, induces a compressive residual stress field that improves fatigue, wear and corrosion resistance. For LSP treatment, a Q-switched Nd:YAG laser with infrared radiation was used. Residual stress distribution as a function of depth was determined by the contour method. Compact tension specimens with a hole at the notch tip were subjected to LSP process and cold expansion and then tested under cyclic loading with R=0.1 generating fatigue cracks on the hole surface. Fatigue crack initiation and growth is analyzed and associated with the residual stress distribution generated by both treatments. It is observed that both methods are complementary; cold expansion increases fatigue crack initiation life, while LSP reduces fatigue crack growth rate.