• Horticultural Science & Technology
• /
• v.34 no.5
• /
• pp.701-707
• /
• 2016

The charantin contents of leaves, stems, female and male flowers, and fruits in bitter gourd (Momordica charantia) were analyzed at different harvest seasons to investigate the availability of potential edible parts other than fruits. The charantin contents of fruits ranged from 14.7 to $16.0mg{\cdot}g^{-1}$ dry weight (DW) and those of leaves ranged from 131.4 to $138.0mg{\cdot}g^{-1}DW$, which was eight times higher than in fruits. The charantin contents of female and male flowers and stems were also significantly higher than those of the fruits. The ratio of total charantin content was highest in leaves (48%) of DW, followed by female flowers (20-21%), male flowers (14%), stems (12-13%), and fruits (5%). The charantin contents of fruits harvested 14 days after fruit setting was higher in June to mid-July (20.2 to $23.3mg{\cdot}g^{-1}DW$) than in late July to late August (13.3 to $19.4mg{\cdot}g^{-1}DW$). The higher the fruit weight, the lower the charantin contents, which showed that a negative correlation exists between fruit weight and charantin contents in bitter gourd. These results suggest that to obtain bitter gourd fruits with high charantin contents, fruits should be harvested until mid-July when fruit growth is fast and temperature is high. In addition, leaves, stems, and female and male flowers of bitter gourd can be used as for food, which are known to reduce blood sugar level.

• The KIPS Transactions:PartB
• /
• v.9B no.6
• /
• pp.853-862
• /
• 2002

Face Detection can be defined as follows : Given a digitalized arbitrary or image sequence, the goal of face detection is to determine whether or not there is any human face in the image, and if present, return its location, direction, size, and so on. This technique is based on many applications such face recognition facial expression, head gesture and so on, and is one of important qualify factors. But face in an given image is considerably difficult because facial expression, pose, facial size, light conditions and so on change the overall appearance of faces, thereby making it difficult to detect them rapidly and exactly. Therefore, this paper proposes fast and exact face detection which overcomes some restrictions by using neural network. The proposed system can be face detection irrelevant to facial expression, background and pose rapidily. For this. face detection is performed by neural network and detection response time is shortened by reducing search region and decreasing calculation time of neural network. Reduced search region is accomplished by using skin color segment and frame difference. And neural network calculation time is decreased by reducing input vector sire of neural network. Principle Component Analysis (PCA) can reduce the dimension of data. Also, pose estimates in extracted facial image and eye region is located. This result enables to us more informations about face. The experiment measured success rate and process time using the Squared Mahalanobis distance. Both of still images and sequence images was experimented and in case of skin color segment, the result shows different success rate whether or not camera setting. Pose estimation experiments was carried out under same conditions and existence or nonexistence glasses shows different result in eye region detection. The experiment results show satisfactory detection rate and process time for real time system.

• Journal of Distribution Science
• /
• v.12 no.10
• /
• pp.67-74
• /
• 2014

Purpose - This study analyzed how image affects customer trust and satisfaction in the online shopping mall market, which is becoming more competitive; future implications for customer management in online shopping malls were presented. Consumers visit and prefer a few shopping mall sites instead of many sites. Consumers do not visit sites that cannot provide trust and satisfaction. Therefore, establishing trust and satisfaction with differentiated image is essential for survival and growth. Specifically analyzing company image, shop image, and brand image, I studied how symbolic image, functional image, and empirical image affect satisfaction mediated by trust in the online shopping malls of hypermarket retailers. Research design, data, and methodology - To investigate the relationship between image and satisfaction of big box retailers' shopping malls in the online market, the study is based on analyzed data from questionnaires involving advanced research. From May 1st to 20th in the year 2014, a questionnaire survey targeting university students using big box retailers' shopping malls in Seoul was conducted. A total of 282 questionnaires were conducted, and 276 questionnaires were used for empirical analysis, excluding invalid data. Using the SPSS 21.0 statistics package, factor analysis and regression analysis were implemented, and effects of image on trust and satisfaction were presented. Results - First, symbolic image can affect satisfaction with only trust. Among 3 image factors, symbolic image exerts the most influence on trust; trust is important in coupling the medium to satisfaction. Second, functional image and empirical image affect satisfaction directly and indirectly with trust. Conclusions - As I classified the image of hyper market retailers' online shopping malls into symbolic, functional, and empirical image, I analyzed the effects of image on trust and satisfaction empirically. The results of the study and strategic implications are as follows. First, symbolic image can affect satisfaction with only trust. Among 3 image factors, symbolic image exerts the most influence on trust; trust is important in coupling the medium to satisfaction. The establishment of a distinctive symbolic image, such as the online shopping mall's loyalty, level of awareness, and special service, is needed. With the establishment of symbolic image, trust and satisfaction could be improved. Second, functional image and empirical image affect satisfaction directly and indirectly with trust. Especially, as functional image affects trust more than empirical image, setting and implementing a strategy for empirical image based on the right price, service, and convenience could raise trust and satisfaction. Empirical image affects trust and satisfaction substantially. Even though empirical image's influence on trust is lower than that of other three image factors, empirical image's influence on satisfaction is higher than symbolic image. Therefore, it requires a strategy for providing joyful use, and information research functions and distinctive use experience are important to improve satisfaction. This study analyzed image characteristics of hyper-market retailers' online shopping malls in the fast-growing online market; future strategic implications were presented.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.302-307
• /
• 2016

The aim of this study was to examine the optimum wattage and installation height using nano-carbon fiber infrared heating lamp (NCFIHL) for heating energy saving and plug seedling production in plug seedling production greenhouse in winter season. NCFIHL of 700 and 900 W was installed over the bed ($1.2{\times}2.4m$) as 0.7, 1.0, and 1.3 m height, respectively, for the production of grafted watermelon seedling in venlo-type glasshouse. Watermelon (Citrullus lanatus (Thunb.) Manst.) 'Jijonggul' and gourd (Lagenaria leucantha Rusby.) 'Sunbongjang' were used as scions and rootstocks, respectively. The scions and rootstocks were grafted by single cotyledon ordinary splice grafting. Light intensity of NCFIHL was below the $1{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ in all treatment. Spectral distributions of NCFIHL presented mostly infrared area. When outside air temperature was below $10^{\circ}C$, 700 and 900 W NCFIHL installed with 0.7 m height treatment and 900 W NCFIHL installed with 1.0 m height treatment maintained the setting air temperature ($20^{\circ}C$) at night. In the result of taking thermal imaging, the grafted watermelons were getting warm fast in 900 W NCFIHL installed with 0.7 m height treatment at night. Compactness of the grafted watermelons was the greatest in 700 W NCFIHL installed with 1.3 m height treatment. The results indicate that NCFIHL installed above 1.0 m height using 700 W was suitable for production of plug seedling.

• Journal of Forest and Environmental Science
• /
• v.32 no.4
• /
• pp.353-366
• /
• 2016

The effect of different environmental conditions and altitudes on the growth and reproductive characteristics in 12 teak plantations at 4 different blocks (Cauvery canal bank, Topslip and Parambikulam (Tamil Nadu), Nilambur and Wayanad (Kerala) of Southern India was investigated. The annual rainfall and mean monthly temperature of the study areas varied significantly from 1390 to 3188 mm and 16 to $38^{\circ}C$ respectively. The teak plantations in Cauvery canal bank which grow in continuous moisture condition (8-10 months) retain the leaf for longer period due to moisture resulting continuous supply of photosynthates leads to fast and outstanding growth. The girth at breast height (GBH) of 34-years-old tree in canal area was similar to that of 40 to 49-years-old trees in other locations, indicating that teak plantations with regular watering and silvicultural practices may be harvested at the age of 30 years. The leaf fall, flowering and fruiting showed significant variations in different teak plantations due to environmental factors and altitudes. It was found that increase of rainfall enhances number of flowers in the inflorescence in teak. Tholpatty (block-IV) showed more flowering in a inflorescence (3,734-3,744) compared to other plantations (1,678-3,307). Flowering in Nilambur and Wayanad coincided with heavy rainfall resulting low fruitset (1.1-2.3%) probably heavy rainfall ensuing restriction of pollinators for effective pollination. On the other hand, flowering in Cauvery canal bank (Block-I) was not coincided with high rainfall exhibited high fruitset (2-3%). About 66 to 76% of the fruits in different plantations were empty, and it is one of the main reasons for poor germination in teak. The seeds of Topslip and Parambikulam (Block-II) showed higher seed weight, maximum seed filling and good germination indicating that the environmental factors and altitude play significant role in fruit setting and seed filling in teak. In addition, the teak plantations in Topslip and Parambikulam showed good growth suggesting that plantations in the altitude range of approximately 550-700 m may be suitable for converting into seed production areas for production of quality seeds.

• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.230-242
• /
• 2017

Seismic velocities measured from in-situ tests (n=177) and through rock core samples (n=1,035) are reviewed in light of construction standards, widely used standards as a first-hand approximation of rock classification solely based on seismic velocities. In-situ down hole tests and refraction survey for soft rocks showed seismic velocities of 1,400~2,900 m/s which is faster than those specified in construction standards. For moderate~ hard rocks, in-situ down hole tests and refraction survey showed 2,300~3,800 m/s which roughly corresponds with the range specified in the construction standards. A similar trend is also observed for seismic velocities measured from rock core samples. The observed differences between construction standards and seismic velocities can be explained in two ways. If construction standards are correct the observed differences may be explained with seismic velocities affected by underlying fast velocities and also possibly with selection of intact cores for velocity measurement. Alternatively, construction standards may have intrinsic problems, namely artificial discrete boundaries between soft rocks and moderate rocks, application of foreign standards without consideration of geologic setting and lack of independent verification steps. Therefore, we suggest a carefully designed verification studies from a test site. We also suggest that care must be exercised when applying construction standards for the interpretation and accessment of rock mass properties.

• Women's Health Nursing
• /
• v.7 no.3
• /
• pp.271-283
• /
• 2001

The childbearing process is a sociocultural phenomenon of a woman who gives birth to a child as well as a biological phenomenon. The purpose of this ethnographic research study was to explore the experience of childbearing process of mothers with children from pregnancy to the 3 months postpartum in Korea and to understand deeply the perspectives of childbearing women reflected on Korean sociocultural values. A convenient sample of 10 childbearing women were observed from January to October 2000 through field work in Seoul, Korea. Data analysis was accomplished under ongoing process. The results of this study were as follows : The mothers with children experienced self-reflection, family relation, and physical adaptation during pregnancy. In self-reflection, all mothers experienced universality and diversity in their self-discovering process. The universal experiences were maturation, life with family and priority on maternal value between being a mother and a woman. The diverse experiences were taking a dual role of working mother, emotional drift of a resigned mother, and disheartened life of a mother who has two daughters. In family relation, the foundation of the new marital relationship were attained during childbearing process and sexual life were changed for the benefit of a healthy mother and a healthy baby. All mothers established friendly relations with their mothers, but established friendly or conflicting or constraining relations with their mother-in-laws due to husband based family culture. In physical adaptation, the informants endured well the physical discomfort and recognized general appearance change. Also maternal-fetal interaction occurred and mothers realistically felt motherhood and accepted themselves as mother-to-be. The mothers prepared for the best delivery, look for a safe childbirth center, newborn goods, endorsed family coping during hospitalization and responded labor pain to make it more endurable, less painful, fast passed owing to labor recognition of the natural process to be a mother. After childbirth, they felt emancipation, satisfaction, accomplishment, more easiness, actually feeling as mother-to-be, emptiness, and showed response to the sex of newborn. Their Sanhujori practice was different according to the Sanhujori environment including provider, place, time in postpartum and reflected on Sanhubyung. The mothers felt actually mother-to-be and happiness during lactation regardless of feeding pattern. These mothers had a different maternal image about rearing subjecthood through their child-rearing experience. But all mothers felt need for family support and social support. The universal rearing response were actual feeling of mother-to-be, a strenuous experience, a pride on child-rearing, confusion, reflecting marital relationship, and wondering rivalry among children. In conclusion, mother of all with children went through self-discovery, self-reflection and made connections with the family as a mother and as a woman simultaneously during the childbearing process. Therefore it is suggested when harmony and balance between a mother and a woman is accomplished, the woman will lead a healthy and high quality of life. Also, this study sought to confirm the sociocultural factors affecting the childbearing process from the perspectives of the women with children. Therefore health care providers must understand deeply the childbearing women with children based on this finding of and try a integrative approach with new ideology of maternity with biocultural perspectives in a clinical setting.

• Journal of Acupuncture Research
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2010

Objectives : The mechanical properties of Korean electric cupping systems are studied via experimental measurements. The study aimed at establishing the fundamentals of industrialization and systemization of oriental medicine device industry, as well as improving the quality of life for many Koreans. Methods : We reviewed the studies on traditional cupping as well as modern one to fine necessary factors for electric cupping systems. To characterize the mechanical properties of Korean electric cupping systems, we measured the pressure characteristics of commercially available electric cupping system by using an automatic pressure acquisition system and a standard cup. The pumping capability was checked at 40 seconds, and the stability of the suction cup was checked at 600 seconds. We also acquired the noise level of each system in clinical setting. To check the portability of each system, we also measured its physical dimensions. We scrutinized system manuals provided by the system manufacturers. Results : It took less than 5 second to reach the pressure if the connection between the air hose and the vacuum valve of the cupping system was secure. Pressure diminished to no more than 10% for 600s for all systems. Noise levels were 55~70 dB. Increase in pressure was too fast to control for a designated vacuum level except for one product. Conclusions : The Pumping ability of the systems is impressive and reliable. Pressure retention ability of each cup is quite reliable and reproducible. Therefore, their mechanical performances were worthy of recommendation. Some of them had noise level higher than 60 dB and they were bothersome. It was also suggested that the control for low to middle pressure needed to be accomplished by the cupping system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.1040-1046
• /
• 2010

The main disadvantage of rapid setting concrete is the occurrence of cracking because of fast hydration reaction due to high thermal expansion and shrinkage. However, if the fly ash is used in concrete, it is possible to prevent cracking since the hydration heat can be decreased. Although Very-Early Strength-Latex Modified Concrete(VES-LMC) is an excellent material, occurrence of cracking has been reported because of high hydration heat. In the present study, new method which can apply the fly ash to the VES-LMC was developed. Research for the new method to improve the safety for the cracking was conducted. Safety was confirmed by reducing the shrinkage and hydration heat in the condition of overcoming the low early-age strength. Detailed conclusions are follows. Early-age compressive strength was decreased a little with increase of UFFA content. However, 28-d compressive strength was statistically insignificant regardless of UFFA contents. If the UFFA is replaced 15% to 20% of unit cement weight in concrete, maximum shrinkage can be reduced up to 43% to 47%. Usage of UFFA in VES-LMC guarantees the safety for cracking since it is very effective to control of early-age shrinkage.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.339-345
• /
• 2014

For enhancing productivity of glulam, high frequency (HF) curing technique was researched in this study. Heat energy is generated by electromagnetic energy dissipation when HF wave is applied to a dielectric material. Because both lamina and adhesives have dielectric property, internal heat generation would be occurred when HF wave is applied to glulam. Most room temperature setting adhesives such as phenol-resorcinol-formaldehyde (PRF) resin, which is popularly used for manufacturing glulam, can be cured more quickly as temperature of adhesives increases. In this study, dielectric properties of larch wood and PRF adhesives were experimentally evaluated, and the mechanism of HF heating, which induced the fast curing of glue layer in glulam, was theoretically analyzed. Result of our experiments showed relative loss factor of PRF resin, which leads temperature increase, was higher than that of larch wood. Also, it showed density and specific heat of PRF, which are resistance factors of temperature increase, were higher than those of wood. It was expected that the heat generation in PRF resin by HF heating would occur greater than in larch wood, because the ratio of relative loss factor to density and specific heat of PRF resin was greater than that of larch wood. Through theoretical approach with the experimental results, the relative strengths of ISM band HF electric fields to achieve a target heating rate were estimated.