• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.233-241
• /
• 2004

In this paper, we propose a packet-lossless fast rerouting scheme at a link/node fault in MPLS (Multiprotocol Label Switching) network with minimized accumulated buffer delay problem at ingress node. The proposed scheme uses a predefined, alternative LSP (Label Switched Path) In order to restore user traffic. We propose two restoration approaches. In the first approach, an alternative LSP is initially allocated with more bandwidth than the protected working LSP during the failure recovery phase. After the failure recovery, the excessively allocated bandwidth of the alternative LSP is readjusted to the bandwidth of the working LSP. In the second approach, we reduce the length of protected working LSP by using segment-based restoration. The proposed approaches have merits of (ⅰ) no buffer delay problem after failure recovery at ingress node, and (ⅱ) the smaller required buffer size at the ingress node than the previous approach.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.607-610
• /
• 2001

본 논문은 현재 사용되는 라우팅 프로토콜을 이용하여 MPLS망에서 다중 LSP를 설정할 수 있도록 CLSR을 정의하고, CLSR을 이용하여 트래픽을 분산시킬 수 있는 방안을 제안했다. 이 방식을 통하여 MPLS망의 전체 Throughput을 향상시킬 수 있으며, fast rerouting에서 재 라우팅 되는 플로우가 입구 LSR을 거쳐야 하는 단점을 보완함으로써 기존의 fast rerouting 방식에 비해 평균 재전송 시간을 단축시킴으로써 성능을 향상시켰다.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.821-830
• /
• 2001

H.323 proposes to use Mobile IP and H.323 ad hoc conference signaling to provide Handoff function to a mobile terminal. But H.323 ad hoc conference signaling has a drawback. It requires an H.323 endpoint to do a complex conference signaling which makes inter-operability between H.323 endpoints difficult and takes the longer signaling time. In this paper, we propose an Handoff signaling using H.323 rerouting(Third party initiated Pause and Rerouting). H.323 rerouting signaling only requires an H.323 endpoint to do H.323 basic signaling in reestablishing media channel, and makes inter-operability more easier and provides the faster Handoff. To do this, our H.323 GK has derived H.245 control channel using tunneling for all H.323 calls including the fast connect calls which enable endpoints communicate each other if they don\`t have H.245 control channel. In order to evaluate the performance of the proposed signaling, we have conducted an experiment that compares a call transfer signaling using H.323 rerouting with ad hoc conference signaling in inter-operability and signaling delay. The results of our experiment shows that the call transfer signaling can inter-operate with four H.323 endpoints among five H.323 endpoints of other vendors and reduces the signaling delay average 1.4 sec.

• Management Science and Financial Engineering
• /
• v.9 no.1
• /
• pp.29-49
• /
• 2003

This paper develops channel reallocation methodologies for survival transmission networks, Any failure on a high-speed telecommunication network needs to be restored rapidly and a channel real-location methodology has an important role for the fast restoration. This paper considers the channel reallocation problems under a line restoration with distributed control, where the line restoration restores the failed channels by rerouting the channels along the two alternative routes. The objective is to determine the optimal number of rerouting channels on the alternative rerouting paths of a given transmission network, where the optimality criteria are the first, the last and the mean restoration times. For each criterion, the problem is formulated as a mixed integer programming and the optimal channel reallocation algorithm is suggested based upon the characterization of the optimal solution.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2589-2609
• /
• 2021

Segment routing (SR) is a highly implementable approach for traffic engineering (TE) with high flexibility, high scalability, and high stability, which can be established upon existing network infrastructure. Thus, when a network failure occurs, it can leverage the existing rerouting methods, such as rerouting based on Interior Gateway Protocol (IGP) and fast rerouting with loop-free alternates. To better exploit these features, we propose a high-performance and easy-to-deploy method SRUF (Segment Routing under Uncertain Failures). The method is inspired by the Value-at-Risk (VaR) theory in finance. Just as each investment risk is considered in financial investment, SRUF also considers each traffic distribution scheme's risk when forwarding traffic to achieve optimal traffic distribution. Specifically, SRUF takes into account that every link may fail and therefore has inherent robustness and high availability. Also, SRUF considers that a single link failure is a low-probability event; hence it can achieve high performance. We perform experiments on real topologies to validate the flexibility, high-availability, and load balancing of SRUF. The results show that when given an availability requirement, SRUF has greater load balancing performance under uncertain failures and that when given a demand requirement, SRUF can achieve higher availability.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.401-408
• /
• 2005

We propose a new MPLS restoration scheme that uses network resources more efficiently and minimizes the backup path cost effectively. Contrary to other restoration strategies, the proposed restoration scheme starts the recovery action at the selected node of a working LSP. At LSP setup, the working and backup path cost is evaluated and the starting node of restoration is designated. By doing so, the restoration speed could be further increased and resource utilization could be maximized. We simulated the proposed scheme and compared with other restoration and protection schemes. The result shows that our scheme can provide fast restoration with acceptable delay and loss characteristics.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.5
• /
• pp.232-242
• /
• 2002

In a MPLS(Multiprotocol Label Switching) network, it is important to reduce the number of labels and LSP(Lable Switched Path)s for network resource management. MTP(Multipoint-to-Point) LSP can be used to solve this problem. In consideration of traffic engineering, MTP LSP must be chosen to enhance the availability of network and link utilization. Also, a fast mechanism to setup MTP LSPs is required for rerouting capability against link failure. In this paper, we propose a fast MTP LSP traffic engineering of multipath MTP LSP by using a mapping of a MTP LSP upon Diffserv PHBs(Per Hop Behavior) in a Diffserv-capable MPLS network. In the proposed traffic engineering, we determine multiple MTP LSPs in a hierarchical manner according to the characteristics of different services. By using Monte-Carlo method for traffic load balancing process, it provides fast rerouting capability in case of frequent link failure across large network. Out method produces to be nearly optimal within reasonable run-times. It's time complexity is in O( Cn$^2$logn) as conventional multipath routing and it is much faster than Linear Programming approach. Simulation results show that the proposed traffic engineering can be controlled effectively in an administrative manner and enhance the availability of network in comparison with conventional multipath routing.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5200-5222
• /
• 2017

The separation of control plane and data plane in Software Defined Network (SDN) makes it flexible to control the network behavior, while also causes some inconveniences to the link failure recovery due to the delay between fail point and the controller. To avoid delay and packet loss, pre-defined backup paths are used to reroute the disrupted flows when failure occurs. However, it may introduce large overhead to build and maintain these backup paths and is hard to dynamically construct backup paths according to the network status so as to avoid congestion during rerouting process. In order to realize congestion aware fast link failure recovery, this paper proposes a novel method which installs multi backup paths for every link via source routing and per-hop-tags and spread flows into different paths at fail point to avoid congestion. We carry out experiments and simulations to evaluate the performance of the method and the results demonstrate that our method can achieve congestion aware fast link failure recovery in SDN with a very low overhead.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.2
• /
• pp.11-20
• /
• 1997

It is a recent trend that mobile communications and PCS are intergrated into the broadband network. Broadband mutlimedia traffic will be transported over the integrated network. In this paper, we propose a connection re-routing method for fast inter-switch hadoffs and dynamic resurce reservation scheme, which is based on the proposed re-routing method, for the ATM-based personal communications network. To reduce the delay for re-routing method, for the ATM-based personal communications network. To reduce the delay for re-routing, the proposed re-routing method is to reserve VPI/VCIs for possible inter-swich handoff calls in advance. Our reservation scheme is to statistically reserve the fixed resources for possible inter-switch handoff calls, according to the QoS of the handoff calls. The simmulation reslts show that our proposed scheme satisfies the required QoS of handoff calls and keep the dropping probability of handoff calls lower than other schemes.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.8
• /
• pp.1057-1063
• /
• 1995

This paper describes an approach for constucting a Rectilinear Steiner Tree (RST) derivable from a Minimum Spanning Tree (MST), using Associative Processor (AP). We propose a fast parallel algorithm using AP's basic algorithms which can be realized by the processing capability of rudimentary logic and the selective matching capability of Content- Addressable Memory (CAM). The main idea behind the proposed algorithm is to maximize the overlaps between the consecutive edges in MST, thus minimizing the cost of a RST. An efficient parallel linear algorithm with O(n) complexity to construct a RST is proposed using an algorithm to find a MST, where n is the number of nodes. A node insertion method is introduced to allow the Z-type layout. The routing process which only depends on the neighbor edges and the no-rerouting strategy both help to speed up finding a RST.