• Composites Research
• /
• 제30권3호
• /
• pp.202-208
• /
• 2017

RTM은 작은 크기에서 큰 크기의 복합재료를 생산할 수 있는 대량 생산 공정이다. 최근 경화 시간이 약 10분 이내인 속경화 수지가 자동차 및 항공우주 산업에 사용되고 있다. 수지의 점도는 경화 정도와 관련이 있으며, 금형 내부로 충진되는 과정에서 급격히 점도가 변할 수 있다. 따라서 속경화 수지의 유동 특성과 경화도를 해석적으로 예측하는 데 많은 노력이 필요하므로 실험적으로 측정하고 평가하는 것이 유리하다. 복합재료의 경화도를 측정하는 방법은 대표적으로 DMA, 유전기법 등이 있다. 본 논문에서는 다채널 경화 모니터링 시스템을 이용하여 속경화 수지의 유동과 경화도를 측정하였다. 총 8채널의 유전센서가 사용되었으며, 다양한 압력 조건에 따른 금형 내부의 유동과 경화도를 측정하고 상호 비교하였다.

• Investigative Magnetic Resonance Imaging
• /
• 제19권1호
• /
• pp.19-30
• /
• 2015

Purpose: A new compressed sensing technique by iterative truncation of small transformed coefficients (ITSC) is proposed for fast cardiac CINE MRI. Materials and Methods: The proposed reconstruction is composed of two processes: truncation of the small transformed coefficients in the r-f domain, and restoration of the measured data in the k-t domain. The two processes are sequentially applied iteratively until the reconstructed images converge, with the assumption that the cardiac CINE images are inherently sparse in the r-f domain. A novel sampling strategy to reduce the normalized mean square error of the reconstructed images is proposed. Results: The technique shows the least normalized mean square error among the four methods under comparison (zero filling, view sharing, k-t FOCUSS, and ITSC). Application of ITSC for multi-slice cardiac CINE imaging was tested with the number of slices of 2 to 8 in a single breath-hold, to demonstrate the clinical usefulness of the technique. Conclusion: Reconstructed images with the compression factors of 3-4 appear very close to the images without compression. Furthermore the proposed algorithm is computationally efficient and is stable without using matrix inversion during the reconstruction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.93-101
• /
• 2003

Steel frame-type retaining walls(SFRW) are constructed by on site bolting of prefabricated steel frames and internal filling of materials such as rocks with the size of 150-300mm. Easy & fast construction, superior drainage performance and structural performance to rigorous site conditions are some of the merits of applying the SFRW to various construction sites. After the development of the structural details, a test construction of SFRW, with the height of 6m and 30m in length, was carried out at an apartment site. After completion, several months of monitoring was carried out on the structure to check displacement, tilting, settlement, soil pressures and drainage characteristics. The results of the structural behavior of SFRW along with its construction methods are presented in the paper.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.473-482
• /
• 2017

Hand gesture recognition is regarded as new Human Computer Interaction (HCI) technologies for the next generation of mobile devices. Previous hand gesture implementation requires a large memory and computation power for hand segmentation, which fails to give real-time interaction with mobile devices to users. Therefore, in this paper, we presents a low latency and memory-efficient hand segmentation architecture for natural hand gesture recognition. To obtain both high memory-efficiency and low latency, we propose a streaming hand contour tracing unit and a fast contour filling unit. As a result, it achieves 7.14 ms latency with only 34.8 KB on-chip memory, which are 1.65 times less latency and 1.68 times less on-chip memory, respectively, compare to the best-in-class.

• 콘크리트학회논문집
• /
• 제16권4호
• /
• pp.573-579
• /
• 2004

For the fast construction and replacement of bridges in urban area, a prefabricated bridge system can be an excellent alternative. Details of prefabricated slabs for PSC girders were developed and static tests on shear connections were conducted to propose design equations of the shear connection. Stirrups and stud connectors were used as shear connectors and non-shrink mortar was used for the filling material in shear pockets for shear connectors. Stirrups and studs were fabricated to insert embedded nut-type devices in PSC girders. Shear strength of the shear connection considering chemical bond, friction and mechanical connectors was evaluated and empirical equations were suggested. Due to the mechanical connectors, ultimate slip capacity of the shear connection was sufficient for shear load redistribution, and suggested details of the shear connection showed good performance in terms of strength and ductility.

• 전자공학회논문지B
• /
• 제31B권5호
• /
• pp.95-107
• /
• 1994

A new efficient contour following algorithm for connected-component labeling processing is proposed. The basic idea of the algorithm is that the total number of downward chain codes is the same as one of upward chain codes along the closed contour. If the chain code direction is upward, then region start mark is assigned at the chain code departure pixel and if the chain code is downward, then region end mark is assigned at the chain code arrival pixel. The proposed algorithm extracts directly the contour information from only the current direction information of chain. This makes the algorithm simple and fast and requires less memory with comparison to the conventional algorithms.The proposed contour following algorithm can be applied to the various kind of image processing such as region filling, restoration and region feature extraction.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2012년도 하계학술대회
• /
• pp.127-130
• /
• 2012

본 논문에서는 자유시점 또는 오토스테레오스코픽 비디오나 홀로그래픽 비디오 서비스 들을 목표로 가상시점 영상을 빠르게 생성하는 방법을 제안한다. 이 방법에서 좌/우 깊이영상이 주어졌다고 가정하고, 두 깊이 영상을 이용하여 깊이 값과 변위를 계산 한 후 깊이 당 변위증분을 계산하여 사용한다. 계산된 깊이 값 당 변위증분과 해당 픽셀의 깊이정보를 이용하여 텍스쳐 이미지를 원하는 가상 시점으로 이동시킨다. 좌영상과 우영상을 원하는 가상시점으로 각각 생성한 후, 잡음과 disocclusion을 효과적으로 제거하기 위하여 두 영상을 결합한다. 그 다음 남은 홀을 효과적인 hole-filling으로 제거하여 가상 시점 영상을 생성한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권8호
• /
• pp.3842-3855
• /
• 2018

A novel image completion method is proposed that uses the advantage of planar structural information to fill corrupted portions of an image. First, in estimating parameters of the projection plane, the image is divided into several planes, and their planar structural information is analyzed. Second, in calculating the a priori probability of patch and patch offset regularity, this information is converted into a constraint condition to guide the process of filling the hole. Experimental results show that the proposed algorithm is fast and effective, and ensures the structure continuity of the damaged region and smoothness of the texture.

• 한국유체기계학회 논문집
• /
• 제11권3호
• /
• pp.50-55
• /
• 2008

The diverter system is a key component in achieving a high accuracy liquid flow rate standard using a static gravimetric system with a flying start and stop method. The diverter is a moving device used to direct flow alternately along its normal course(by pass) or towards the weighing tank. The time needed for collection into the weighing tank is measured using a timer. So it is important to the diversion period is sufficiently fast and triggering point of timer which is determined the filling time. On this studies show that uncertainty of diverter system for changing diversion speed and triggering point was estimated in accordance with Guide to The Expression of Uncertainty in Measurement(ISO).

• 방송공학회논문지
• /
• 제16권4호
• /
• pp.596-601
• /
• 2011

양안식 3차원 방송의 경우 좌우 두 시점에 해당하는 영상을 동시에 전송해야 하기 때문에 전송 대역폭의 부담이 매우 크다. 이러한 부담을 줄이기 위해 좌우 시점의 두 영상을 전송하는 대신에 좌영상과 이에 해당하는 깊이맵을 부호화하여 전송하는 방법이 있다. 이러한 3차원 방송 시스템의 수신단에서는 좌영상과 깊이맵을 복호한 뒤에 우영상을 만들어 좌우 영상을 실시간으로 출력한다. 본 논문에서는 좌영상과 깊이맵을 이용하여 가상시점 영상을 생성할 때 생기는 빈 공간을 효율적으로 채우는 기법을 제안하고, 전 과정의 실시간 처리를 위해 이를 GPU상에서 병렬로 처리되도록 구현했다. 그 결과 효과적으로 홀 채움을 수행하면서 CPU 대비 15배 이상 빠르게 양안식 영상을 생성할 수 있었다.