• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1194-1205
• /
• 2005

The common-rail injection systems, as a new diesel injection system for passenger car, have more degrees of freedom in controlling both the injection timing and injection rate with the high pressure. In this study, a piezo-driven injector was applied to a high pressure common-rail type fuel injection system for the control capability of the high pressure injector's needle and firstly examined the piezo-electric characteristics of a piezo-driven injector. Also in order to analyze the effect of injector's needle response driven by different driving method on the injection, we investigated the diesel spray characteristics in a constant volume chamber pressurized by nitrogen gas for two injectors, a solenoid-driven injector and a piezo-driven injector, both equipped with the same injection nozzle with sac type and 5-injection hole. The experimental method for spray visualization was based on back-light photography technique by utilizing a high speed framing camera. The macroscopic spray propagation was geometrically measured and characterized in term of the spray tip penetration, spray cone angle and spray tip speed. For the evaluation of the needle response of the above two injectors, we indirectly estimated the needle's behavior with an accelerometer and injection rate measurement employing Bosch's method was conducted. The experimental results show that the spray tip penetrations of piezo­driven injector were longer, on the whole, than that of the solenoid-driven injector. Besides we found that the piezo-driven injector have a higher injection flow rate by a fast needle response and it was possible to control the injection rate slope in piezo-driven injector by altering the induced current.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.207-213
• /
• 1997

The purpose of this study is to aim at presenting efficient technique of 3-D Terrain Modelling through multilateral approach methods and to compare with raw data, using low-densed randomly located point data. The subject religion of this study are selected two sites and take into consideration for degree of freedom about low-densed randomly located point data. The result of this study by precision analysis of digital cartographic map-ping using low-densed randomly located point data bave shown that . First, making digital cartographic map, the technique of making it using low-desned randomly located point data by TIN-based results to good and fast run-time in A and B sites all together. Second, the visualization analysis results of digital cartographic map using TIN and GRID-based terrain modeling techniqus similar exacts A and B sites, but the terrain modeling techniqus by TIN-based are small data size than GRID-based with the data with the data size of saving with DXF files. Third, making digital catographic map using terrain modeling techniques by Grid-based, the standard errors of low-densed randomly located point data and interpolated data using gridding method have more good results by radial basis function interpolation techniques at A and B sites all together.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.4
• /
• pp.660-668
• /
• 2016

In the $21^{st}$ century of digital information society, design is changing from an analog era that focuses on logical and rational knowledge to a new paradigm of an era focused on sensible communications that can react fast. Design becomes to fulfill sensible needs; moreover, full efforts are being made in the academic research of sensibility evaluation for the conceptualization, quantization, and visualization of design sensibilities based on the measurement and evaluation of sensibility. This study provides insight into a sensibility evaluation method to understand the global user's sensibility in the fashion design field. As for research methods, first, measurement methods of physical, psychological, and physiological reactions to design sensibility were examined through written research on sensibility evaluation in both domestic and overseas research. Next, studies on sensibility during the past 15 years from 2000 to 2014 in the field of domestic fashion design were analyzed to grasp research trends in sensibility evaluation methods; subsequently, suitable sensibility evaluation methods for current fashion design were discussed. As a result of the study, it was shown that most sensibility evaluation studies in the field of domestic fashion design are based on surveys using sensibility terms. However, it requires the process of translating among different terms in different lingual cultures and within the limits of a uniformed evaluation. In this regard, recent cases of overseas design studies have been applying new methods to measure physiological reactions such as eye tracking methods combined with IT. The analysis of multilateral sensibility evaluation methods in this study have significant meaning for use as basic data to establish a planning for an evaluation scale to measure the sensibility of global consumers towards modern fashion design more quantitatively.

• International Journal of Automotive Technology
• /
• v.6 no.5
• /
• pp.437-444
• /
• 2005

Unburned hydrocarbon (UBHC) emissions from gasoline engines remain a primary engineering research and development concern due to stricter emission regulations. Gasoline engines produce more UBHC emissions during cold start and warm-up than during any other stage of operation, because of insufficient fuel-air mixing, particularly in view of the additional fuel enrichment used for early starting. Impingement of fuel droplets on the cylinder wall is a major source of UBHC and a concern for oil dilution. This paper describes an experimental study that was carried out to investigate the distribution and 'footprint' of fuel droplets impinging on the cylinder wall during the intake stroke under engine starting conditions. Injectors having different targeting and atomization characteristics were used in a 4-Valve engine with optical access to the intake port and combustion chamber. The spray and targeting performance were characterized using high-speed visualization and Phase Doppler Interferometry techniques. The fuel droplets impinging on the port, cylinder wall and piston top were characterized using a color imaging technique during simulated engine start-up from room temperature. Highly absorbent filter paper was placed around the circumference of the cylinder liner and on the piston top to collect fuel droplets during the intake strokes. A small amount of colored dye, which dissolves completely in gasoline, was used as the tracer. Color density on the paper, which is correlated with the amount of fuel deposited and its distribution on the cylinder wall, was measured using image analysis. The results show that by comparing the locations of the wetted footprints and their color intensities, the influence of fuel injection and engine conditions can be qualitatively and quantitatively examined. Fast FID measurements of UBHC were also performed on the engine for correlation to the mixture formation results.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.34-40
• /
• 2003

The paper presents a method to detect dissolve shots of video scene change detections in an MPEG compressed domain. The proposed algorithm uses color-R DCT coefficients of Ⅰ, P-frames for a fast operation and accurate detection and a minimum decoding process in MPEG sequences. The paper presents a method to detect dissolve shot for three-dimensional visualization and analysis of Image in order to recognize easily in computer as a human detects accurately shots of scene change. First, Color-R DCT coefficients for 8*8 units are obtained and the features are summed in a row. Second, Four-step analysis are Performed for differences of the sum in the frame sequences. The experimental results showed that the algorithm has better detection performance, such as precision and recall rate, than the existing method using an average for all DC image by performing four step analysis. The algorithm has the advantage of speed, simplicity and accuracy. In addition. it requires less amount of storage.

• Korean Journal of Remote Sensing
• /
• v.22 no.1
• /
• pp.49-61
• /
• 2006

The lifting scheme has been found to be a flexible method for constructing scalar wavelets with desirable properties. In this paper, it is extended to the UDAR data compression. A newly developed data compression approach to approximate the UDAR surface with a series of non-overlapping triangles has been presented. Generally a Triangulated Irregular Networks (TIN) are the most common form of digital surface model that consists of elevation values with x, y coordinates that make up triangles. But over the years the TIN data representation has become an important research topic for many researchers due its large data size. Compression of TIN is needed for efficient management of large data and good surface visualization. This approach covers following steps: First, by using a Delaunay triangulation, an efficient algorithm is developed to generate TIN, which forms the terrain from an arbitrary set of data. A new interpolation wavelet filter for TIN has been applied in two steps, namely splitting and elevation. In the splitting step, a triangle has been divided into several sub-triangles and the elevation step has been used to 'modify' the point values (point coordinates for geometry) after the splitting. Then, this data set is compressed at the desired locations by using second generation wavelets. The quality of geographical surface representation after using proposed technique is compared with the original UDAR data. The results show that this method can be used for significant reduction of data set.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.15 no.5
• /
• pp.75-83
• /
• 2019

Direct volume rendering is a widely used method for visualizing three-dimensional volume data such as medical images. This paper proposes a method for applying depth-of-field effects to volume ray-casting to enable more realistic depth-of-filed rendering in direct volume rendering. The proposed method exploits a camera model based on the human perceptual model and can obtain realistic images with a limited number of rays using jittered lens sampling. It also enables interactive exploration of volume data by on-the-fly calculating depth-of-field in the GPU pipeline without preprocessing. In the experiment with various data including medical images, we demonstrated that depth-of-field images with better depth perception were generated 2.6 to 4 times faster than the conventional method.

• Health Communication
• /
• v.12 no.1
• /
• pp.51-72
• /
• 2017

Purpose: Adolescents use emoticons to express their emotions in an online environment. Hence, medical experts can understand the emotions of adolescents by emoticons. The goal of this study was to investigate the relationship between various emotions and emoticons among the Korean adolescents. Methods: The questionnaire survey was conducted between September 1 and 30, 2014, involving 3,272 students in elementary schools, middle schools, and high schools affiliated in the Department of Education of the metropolitan city of Busan. A total of 1,717 students responded to the survey. The participants consisted of 806 males (46.9%), and 911 females (53.1%). Among these, there were 557 elementary school students (32.4%), 617 middle school students (35.9%), and 543 high school students (31.6%). A social networking analysis was conducted using NodeXL. Results: The frequency of emoticon use among adolescents runs in the order of joy, sadness, fear, surprise, anger, disgust, and then depression. Elementary school females mainly use emoticons to express joy; middle school females use emoticons to express sadness, surprise, anger, disgust, and depression; and high school females use emoticons to express fear. Age- and gender-specific emoticon networks were visualized by using the Haren-Korel fast multiscale algorithm. Commonly used emoticons by age and gender were expressed in the networks. Results of age- and gender-specific emoticon networks visualization show similar results of centrality of seven emoticons. Conclusion: In the digital communication environment, emoticons could be used to catch the emotions of adolescents in Korea.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.183-188
• /
• 2023

Game object inheritance and multiple components allow for visualization of system architecture, good code reuse, and fast prototyping. On the other hand, objects are more likely to rely on high latency between game objects and components, static casts, and lots of references to things like null pointers. Therefore, It is important to design a game in such a way so that the dependency of objects on multiple classes could be reduced and existing codes could be reused. Therefore, we designed the game to make the classes more modular by applying Dependency Injection and the design patterns proposed by the Gang of Four. Since these dependencies are attributes of the game object and the injection occurs only in the initialization pass, there is little performance degradation or performance penalty in the game loop. Therefore, this paper proposed an efficient design method to effectively reuse APIs in the design and implementation of survival games.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.489-498
• /
• 2012

This paper consists of two parts: In the first part, we describe our work to build hierarchical knowledge base of digital library patron's research interests and learning topics in various scholarly areas through analyzing well classified Electronic Theses and Dissertations (ETDs) of NDLTD Union catalog. Journal articles from ACM Transactions and conference web sites of computing areas also are added in the analysis to specialize computing fields. This hierarchical knowledge base would be a useful tool for many social computing and information service applications, such as personalization, recommender system, text mining, technology opportunity mining, information visualization, and so on. In the second part, we compare four grouping algorithms to select best one for our data mining researches by testing each one with the hierarchical knowledge base we described in the first part. From these two studies, we intent to show traditional verification methods for social community miming researches, based on interviewing and answering questionnaires, which are expensive, slow, and privacy threatening, can be replaced with systematic, consistent, fast, and privacy protecting methods by using our suggested hierarchical knowledge base.