• 사물인터넷융복합논문지
• /
• 제10권2호
• /
• pp.125-130
• /
• 2024

모빌리티 기술의 급격한 성장으로 산업 분야의 수요는 차량 내에 다양한 장비와 센서의 데이터를 안정적으로 처리할 수 있는 저장장치를 요구하고 있다. NAND 플래시 메모리는 외부에 강한 충격뿐만 아니라 저전력, 빠른 데이터 처리 속도의 장점이 있기 때문에 모빌리티 환경의 저장장치로 활용되고 있다. 그러나 플래시 메모리는 고온에 장기 노출될 경우 데이터 손상이 발생할 수 있는 특징이 있다. 따라서 태양 복사열 등 날씨나 외부 열원에 의한 고온 노출이 빈번한 모빌리티 환경에서는 온도를 관리하기 위한 전용 시스템이 필요하다. 본 논문은 모빌리티 환경에서 저장장치 온도 관리하기 위한 전용 온도 관리 시스템을 설계한다. 설계한 온도 관리 시스템은 전통적인 공기 냉각 방식과 수 냉각방식의 기술을 하이브리드로 적용하였다. 냉각 방식은 저장장치의 온도에 따라 적응형으로 동작하도록 설계하였으며, 온도 단계가 낮을 경우 동작하지 않도록 설계하여 에너지 효율을 높였다. 마지막으로 실험을 통해 각 냉각방식과 방열재질의 차이 따른 온도 차이를 분석하였고, 온도 관리 정책이 성능을 유지하는데 효과가 있음을 증명하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.316-321
• /
• 2001

The optical storage device has recently experienced significant improvement, especially for the aspects of high capacity and fast transfer rate. However, it is necessary to study a new shape of air bearing surface for the rotary type actuator because the optical storage device has the lower access time than that of HDD (Hard Disk Drives). In this study, we proposed the air bearing shape by using SA (Simulated Annealing) algorithm which is very effective to achieve the global optimum instead of many local optimums. The objective of optimization is to minimize the deviation in flying height from a target value 100nm. In addition, the pitch and roll angle should be maintained within the operation limits.

• 전기학회논문지
• /
• 제64권1호
• /
• pp.196-200
• /
• 2015

The switching noise in the power electronics of the power conversion equipment (Power Conditioning System) for large energy storage devices are generated. Since the burst-level transient noise from being generated in the power system at a higher power change process influences the control circuit of the low voltage driver circuit. Noise may cause the malfunction of the control device even if no dielectric breakdown leads to a control circuit. To overcome this, this paper proposes the installation of an additional nano-surge protection device on the power supply DC output circuit of the battery management unit.

• Journal of Information Technology Applications and Management
• /
• 제11권2호
• /
• pp.29-43
• /
• 2004

As the development of an information technique, gradually, mobile device is going to be miniaturized and operates at high speed. By such the requirements, the devices using a flash memory as a storage media are increasing. The flash memory consumes low power, is a small size, and has a fast access time like the main memory. But the flash memory must erase for recording and the erase cycle is limited. JFFS is a representative filesystem which reflects the characteristics of the flash memory. JFFS to be consisted of LSF structure, writes new data to the flash memory in sequential, which is not related to a file size. Mounting a filesystem or an error recovery is achieved through the sequential approach. Therefore, the mounting delay time is happened according to the file system size. This paper proposes a MJFFS to use a multi-checkpoint information to manage a mass flash file system efficiently. A MJFFS, which improves JFFS, divides a flash memory into the block for suitable to the block device, and stores file information of a checkpoint structure at fixed interval. Therefore mounting and error recovery processing reduce efficiently a number of filesystem access by collecting a smaller checkpoint information than capacity of actual files. A MJFFS will be suitable to a mobile device owing to accomplish fast mounting and error recovery using advantage of log foundation filesystem and overcoming defect of JFFS.

• 마이크로전자및패키징학회지
• /
• 제7권4호
• /
• pp.37-42
• /
• 2000

고성능과 고속화의 면에서 광저장장치의 관심은 상당히 높다. 그러나 하드디스크와 비교하여 광저장장치는 임의의 데이터에 대한 탐색속도가 매우 늦다. 따라서, 광저장장치에서의 새로운 형태의 연구가 필요하다. 본 연구는 하드디스크 장치와 유사한 스윔 암 구동기를 사용한 광저장장치의 공기베어링의 특성에 관해 연구하였다. 광저장장치에서 요구되어지는 최적의 슬라이더 형상을 구하기 위하여 공기 베어링면의 형상변화에 따른 부상상태에 관한 민감도를 연구하였다.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.196-200
• /
• 2013

In this paper, the design of PRT vehicle power supply system is discussed. Since there is no power feeding line facilities in PRT system under development, the PRT vehicle must have its own energy storage device on board. For the energy storage device, ultra-capacitor bank is applied due to its fast charging capability and long life time. Charging the Ultra-capacitor bank is performed by wireless inductive power transfer system. The capacitor bank is charged up in less than 10 seconds when the vehicle is traveling by passenger stations. In this paper the design of the ultra-capacitor bank and the wireless inductive power transfer system for the PRT vehicle are discussed. Tests are conducted for the both system and the result shows the efficiency of the wireless inductive power transfer system is higher than 80%.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.129-135
• /
• 2022

Currently, the rapid growth of electric vehicles and the collection and disposal of waste batteries are becoming a social problem. The purpose of this paper is to propose a fast and efficient battery screening method through a safe inspection and storage method according to the collection and storage of waste batteries of electric vehicles. In addition, as the resistance inside the waste battery increases, an instantaneous voltage drop occurs, and there is a risk of overcharging and overdischarging compared to the initial state of the battery. Accordingly, there are great difficulties in operation, so the final goal of this study is to develop a device for diagnosing aging through real-time battery internal resistance measurement. Final result As a result of simulation of the internal resistance measurement test circuit through external impedance (AC), the actual simulation value was 0.05Ω, RS = Vrms / Irms => Vrms = 8.0036mV, Irms = 162.83Ma. Substitute the suggested method. The result was calculated as Rs = 0.0495Ω. It is possible to measure up to 64 impedances inside the aging diagnostic equipment that enables real-time monitoring of the developed battery cells, and the range can be changed according to the application method.

• 한국콘텐츠학회논문지
• /
• 제7권1호
• /
• pp.139-146
• /
• 2007

기존의 임베디드 시스템은 Intel x86 계열의 CPU를 장착한 PC(Personal Computer) 플랫폼에 기반하여 구현되었는데, 이는 PC 환경에서 개발된 많은 솔루션들을 이용할 경우 전체적 인 제품 개발 기간을 단축할 수 있을 뿐만 아니라 제품의 신뢰성을 높일 수 있기 때문이다. 또한 PC 플랫폼 기반의 임베디드 시스템은 데이터 저장을 목적으로 하는 경우가 많아 주로 대용량 하드디스크를 데이터 저장장치로 사용한다. 최근 하드디스크의 용량은 빠른 속도로 증가하고 있는 반면에 하드디스크의 구동 준비 시간이 30초 이상으로 길어지는 문제점이 발생하고 있다. 길어진 하드디스크의 구동 준비 시간은 시스템의 부팅 시간에 영향을 미쳐 전체 시스템의 부팅 시간이 길어지고 사용자의 불편함을 가중시키게 된다. 본 논문에서는 대용량 저장장치를 지원하는 PC 플랫폼 기반의 임베디드 시스템에서 리눅스 커널이 빠른 부팅을 수행할 수 있도록 개선된 시스템 구조와 동적 디스크 장치 검사 기법을 제안하고, 성능을 평가하여 제시한다.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.1-7
• /
• 2008

Superconducting Magnetic Energy Storage (SMES) can inject or absorb real and reactive power to or from a power system at a very fast rate on a repetitive basis. These characteristics make the application of SMES ideal for transmission grid control and stability enhancement. The purpose of this paper is to introduce the SMES model and scheme to control the active and reactive power through the power electronic device. Furthermore, an optimal priority scheme is proposed for the combination of active and reactive power control to be able to stabilize power transient swings.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권4호
• /
• pp.41-45
• /
• 2010

Miniature Joule-Thomson refrigerators have been widely used for rapid cooling of infrared detectors, optoelectronic device, and integrated circuits of micro electronics. The typical J-T refrigerator consists of the recuperative heat exchanger with the double helical tube and fin configuration, J-T nozzle, a mandrel, Dewar and a compressed gas storage bottle. In this study, to predict the thermodynamic behaviors of the refrigerator with a compressed gas storage bottle during the cool-down time, numerical study of transient characteristics for a J-T refrigerator was developed. A simplified transient one.dimensional model of the momentum and energy equations was simultaneously solved to consider the thermal interactions of the each component of the refrigerator. To account for effects of the thermal mass of the solid, the heat capacities of the tube, fins, mandrel and Dewar are considered. The results show the charged gas pressure of the gas storage bottle has significant effects on the performance of the J-T refrigerator. At the elevated gas pressure of the gas storage bottle, the large capacity of the compressed gas storage does not need to get the fast cool-down performance of the J-T refrigerator in the cool-down stage.