• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.767-775
• /
• 2014

The shelf-life of fresh mushrooms is notably limited because their browning, texture change, and decay are too fast after immediately harvest. Especially, the best management for extending golden needle mushroom's shelf-life is modified atmosphere packaging under pressure vacuum at cold storage. In this study, three types of films, $20{\mu}m$ polyethylene+polypropylene (PE+PP), oriented polypropylene (OPP), and low density polyethylene (LDPE) were tested to extend the shelf-life of golden needle mushrooms. Mushrooms were packed under pressure vacuum and stored at $10^{\circ}C$ for 2 weeks. The golden mushrooms in LDPE film as a commercial packaging, were highly perishable and immediately proceed deterioration as browning, elongation, fluctuation of respiratory quotient (RQ) and softening within 7 days after packaging. On the other hand, the mushrooms in OPP and PE+PP film shown that shelf-life were extend to 14 days from 7 days, causing delay breakup of vacuum and maintenance of color, length, and RQ during storage. The breakup of vacuum in PE+PP film was faster few days than OPP film packaging. This present study indicated that the golden needle mushrooms by OPP packaging under pressure vacuum treatment might be extended the shelf-life until approximately 14 days during cold storage.

• Korean Journal of Environment and Ecology
• /
• v.24 no.5
• /
• pp.591-600
• /
• 2010

We estimated and compared C storages and annual $CO_2$ uptakes by 9 dominant tree species planted along the streets. DBH and age by tree species were measured in the sites selected considering the planting status and distributions of tree species, and biomass, C storage, growth rate, and annual $CO_2$ uptake were estimated for each species. As a result, L. tulipifera, M. glyptostroboides, P. occidentalis were classified into fast-growing group, P. serrulata, G. biloba, Z. serrata, S. japonica, A. palmatum showed intermediate growth rates, and P. densiflora was slow-growing. Average C storage per tree was 205kgC/tree and ranged from 518kgC/tree(L. tulipifera) to 41kgC/tree(P. densiflora). Average annual $CO_2$ uptake by urban street trees over their lifespan ranged from $7.6kgCO_2$/tree/y to $99.1kgCO_2$/tree/y and L. tulipifera was the greatest, followed by glyptostroboides and P. occidentalis, and P. densiflora was the lowest. Total annual $CO_2$ uptake by all street trees in Gyeonggi-do, estimated based on the annual $CO_2$ uptake by each species, was as small as approximately 0.67% of that by forest in Gyeonggi-do. However, urban trees are still important because forest area continues to decrease and urbanization occurs annually in Gyeonggi-do, and should be managed considering their multi-functional aspects, including mitigation of heat island effect and building energy saving(indirect $CO_2$ uptake).

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.18 no.1_2
• /
• pp.1-8
• /
• 2012

Kimchi, a Korean fermented vegetable is packaged without pasteurization and distributed with live bacteria actively working to produce lactic acid and carbon dioxide gas in the product. The $CO_2$ production consisting of two distinct phases of initial fast and later slow rates depends on kimchi type, salt content and storage temperature. The $CO_2$ produced from kimchi is accumulated in the product package causing volume expansion and pressure buildup. The dependence of $CO_2$ production rate on salt content and storage temperature has been published formerly and can be used for estimating the package volume and pressure under a variety of storage conditions. As methods to alleviate the problems from the produced $CO_2$, package designs with controlled diffusion pinhole, high $CO_2$ permeable film or $CO_2$ absorber have been tried by several researchers. Properly designed packages adopting the device or tool were shown to have high dissolved $CO_2$ in kimchi without volume expansion and pressure buildup, giving good sensory quality with carbonic taste. Advantages and limitations of each method have been discussed.

• Korean journal of applied entomology
• /
• v.13 no.2 s.19
• /
• pp.71-75
• /
• 1974

A study was conducted to investigate the relationships between the rice weevil and associated storage molds. The results are as follows; 1. All of the developmental stages of the rice weevils are carrying some storage molds in their bodies, and the order of magnitute in the number was the adult, larva and pupa. 2. The molds persist in the body of the rice weevil for 10 days who.1 they were fed on the mold free wheat, and the most persistant mold species was A. candidus. 3. When the mold free weevils were reared on the pure culture of the molds on the wheat, the number of eggs laid by the Lveevil were the greatest for A. candidus. following A. ruber, and the . least number Lvere obtained with A. niger 4. The rice weevil could complete in the pure mold culture on the wheat except for A. niger where the larvae had developed by 2nd or 3rd instars. 3. The shortest developmental periods was obtained with A. candidus and the first adult emerged in 4th week. 6. The unfavorable effects of A. niger on the development of the rice weevil might be associated with the fast growth of the mold together with some unknown effects. 7. There seems to be a protocooperative interaction between these two oraganisms having been developed through the long evolutionary course in common habitat.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.378-388
• /
• 2008

Flash memory has been attracting attention as the next mass storage media for mobile computing systems such as notebook computers and UMPC(Ultra Mobile PC)s due to its low power consumption, high shock and vibration resistance, and small size. A storage system with flash memory excels in random read, sequential read, and sequential write. However, it comes short in random write because of flash memory's physical inability to overwrite data, unless first erased. To overcome this shortcoming, we propose an SSD(Solid State Disk) architecture with two novel features. First, we utilize non-volatile FRAM(Ferroelectric RAM) in conjunction with NAND flash memory, and produce a synergy of FRAM's fast access speed and ability to overwrite, and NAND flash memory's low and affordable price. Second, the architecture categorizes host write requests into small random writes and large sequential writes, and processes them with two different buffer management, optimized for each type of write request. This scheme has been implemented into an SSD prototype and evaluated with a standard PC environment benchmark. The result reveals that our architecture outperforms conventional HDD and other commercial SSDs by more than three times in the throughput for random access workloads.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.5
• /
• pp.402-415
• /
• 2001

Advantages of flash memories are their shock resistance and fast read speed, which is much faster than that of a HDD. Because of these characteristics, they are increasingly used in the traditional household electric appliance and portable handset and therefore, development of file systems which use them as storage medium is increasingly needed. But they have two problems as storage medium. First, data stored in them cannot be overwritten: it must be erased before new data can be stored. Unfortunately, this erase operation usually takes about one second. Consequently, updating data in flash memories takes long time. In this paper, their problem is solved by using a data update mechanism like LFS(Log-structured File System). Second, their erase operations are restricted. We propose novel cleaning policy in order to increase the life cycle. We implemented FAT file system, which is suitable to small storage medium and solved problems, which usually happen in implementing FAT. We evaluated the performance of sequential writes and random writes on our implemented flash file system.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.5
• /
• pp.1-12
• /
• 2015

NAND flash memory has being used for storage systems widely, because it has good features which are low-price, low-power and fast access speed. However, NAND flash memory has an in-place update problem, and therefore it needs FTL(flash translation layer) to run for applications based on hard disk storage. The FTL includes complex functions, such as address mapping, garbage collection, wear leveling and so on. Futhermore, implementation of the FTL on low-power embedded systems is difficult due to its memory requirements and operation overhead. Accordingly, many index data structures for NAND flash memory have being studied for the embedded systems. Overall performances of the index data structures are enhanced by a decreasing of page write counts, whereas it has increased page read counts, as a side effect. Therefore, we propose an index management method using a page mapping log table in $B^+$-Tree based on NAND flash memory to decrease page write counts and not to increase page read counts. The page mapping log table registers page address information of changed index node and then it is exploited when retrieving records. In our experiment, the proposed method reduces the page read counts about 61% at maximum and the page write counts about 31% at maximum, compared to the related studies of index data structures.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.11
• /
• pp.215-222
• /
• 2018

In this paper, the research on the energy storage system adapting super-capacitor has been performed. The most advanced features compared to the conventional lead-acid battery systems is that it can obtain high power capability due to the super capacitor power characteristics. The suggested system can attain high power in short times and achieve high power quality improvements. The application areas are power quality improvement system, motor start power which requires high power during transient times. The energy conversion system consists of bi-directional converter and inverter and advantages of high speed, high power charging and discharging performances. The design steps for the two loop controller of the bi-directional inverter are suggested and verified by the experiment and manufacturing. The two loop controller design starts from linearized transfer function which is calculated from the state averaging model including state decoupling method. The current controller requirements are 20% overshoot and settling time and voltage controller are no overshoot and settling time which is 10 times longer than current controller. The design is verified from the step input response. The designed controllers have unity power factor characteristics and thus can improve the power quality of the grid. It also has fast response time and zero steady state error.

• Journal of Information Management
• /
• v.20 no.2
• /
• pp.69-99
• /
• 1989

With regard to system configuration, file structure and function, this study has compared and analyzed KITLAS developed by KIT Library and CD-ROM BiblioFile, which is selected among CD-ROM Catalog Production Products, the mass storage media, produced by the fast-growing laser technology and information technology. Furthurmore, this study illuminates how to improve the reliability of bibliographic database, implementing downloading and uploading processes which make possible the conversion and online, mass transmission of CD-ROM MARC records at once.

• Journal of Environmental Science International
• /
• v.17 no.6
• /
• pp.601-609
• /
• 2008

In this study for the development of area due to the increasing of industry, population and spreading of urbanization is rapidly increasing but about seventy percent of our nation's areas consists of the mountainous districts. In such case, when those areas have the heavy rains break, they are washed away by a fast-flowing stream of a valley and overflowed. Thus it could result on human life and property damage and also the widespread of flood damage in the downstream area. To decrease those damage, the construction of flood control reservoir is necessary. This research was aim to construct the flood runoff models of a mountainous small district and to determine the probability rainfall by analyzing precipitation. The study also examined the effects of location and size of flood control reservoir on flood reduction. The result showed that the construction of detention basin was an effective way to ensure the safety of flood control and multiple detention basin had superior result for reducing amount of runoff in the down stream area than the single detention basin.