• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권1호
• /
• pp.49-54
• /
• 2010

This paper describes a fast circuit simulation technique using the latency insertion method (LIM) with a parallel and distributed leapfrog algorithm. The numerical simulation results on the PC cluster system that uses the cloud computing system are shown. As a result, it is confirmed that our method is very useful and practical.

• 한국의류산업학회지
• /
• 제19권5호
• /
• pp.626-634
• /
• 2017

This study investigated garment formability of the 73 breathable fabrics for sports-wear garment and their fabric mechanical properties were measured using KES-FB and FAST systems. Predicted garment formability from the mechanical properties measured using KES-FB and FAST systems was compared and discussed with fabric structural parameters. In addition, virtual 3D simulation silhouette by I-designer CAD system wear appearance by simulation using 3D CAD system. And compared with FAST finger chart by mechanical properties of FAST system. The correlation coefficients of extensibility and shear modulus between KES-FB and FAST systems were high, however, bending rigidity and compressibility showed relatively low correlation coefficients. The correlation coefficient of garment formability of breathable fabrics between KES-FB and FAST systems was 0.82. It revealed that garment formability can be predicted from fabric mechanical properties by KES-FB and FAST systems. The garment formability of nylon breathable fabric was higher than that of PET one, and the garment formability of laminated breathable fabric showed the highest value compared to coated, dot and hot melt laminated breathable fabrics. It revealed that garment formability of breathable fabrics for sports-wear can be predicted from fabric mechanical properties and garment formability was dependent on the materials, finishing method and fabric structural parameters.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.533-537
• /
• 2002

A fast time domain modeling and simulation is performed for the input-series-output-parallel connected 2-switch forward converter Steady-state and large-signal transient responses due to a step load change are simulated. The simulation results are verified through experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.131-134
• /
• 1988

This Paper describes a algorithm for evaluating the loss of load probability of a generating system using Fast Hartley Transform. The Fast Hartley Transform(FHT) Is as fast as or faster than the Fast Fourier Transform(FHT) and serves for all the uses such as spectral, digital processing and convolution to which the FFT is at present applied. The method has been tested by applying to IEEE reliability test system and the effectiveness is demonstrated.

• Communications for Statistical Applications and Methods
• /
• 제16권2호
• /
• pp.217-228
• /
• 2009

계층 전이가 가능한 다계층 대기행렬에 대한 빠른 시뮬레이션 방법을 제시하고 이를 이용하여 총 고객의 수가 적정 수준을 초과하는 과부하 발생 확률과 과부하 발생시 각 계층별 평균 고객의 수를 추정한다. 또한 이들 값들이 시스템의 총 로드나 계층별 로드에 따라 어떤 차이를 보이는지도 빠른 시뮬레이션을 통해 서로 비교한다.

• Journal of Information Display
• /
• 제8권2호
• /
• pp.1-4
• /
• 2007

IPS and VA have evolved in various structures such as H-IPS, AS-IPS, and S-PVA gain more competitiveness. The new pixel structures inherently have more domains which cause disclination areas. The effect of disclination is no longer neglected in those structures. A new simulation tool based on FAST Q-tensor method enables one to predict the shape of disclinations and the resulting optical properties. It ensures more accurate results compared to vector-based simulation. We applied this simulation tool for the development of 26-inch wide monitor having H-IPS mode.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.520-545
• /
• 2010

This paper presents the neutronics modeling capabilities of the fast reactor simulation system SHARP, which ANL is developing as part of the U.S. DOE's NEAMS program. We discuss the three transport solvers (PN2ND, SN2ND, and MOCFE) implemented in the UNIC code along with the multigroup cross section generation code $MC^2$-3. We describe the solution methods and modeling capabilities, and discuss the improvement needs for each solver, focusing on massively parallel computation. We present the performance test results against various benchmark problems and ZPR-6 and ZPPR critical experiments. We also discuss weak and strong scalability results for the SN2ND solver on the ZPR-6 critical assembly benchmarks.

• 한국시뮬레이션학회논문지
• /
• 제14권2호
• /
• pp.45-55
• /
• 2005

There are electric double layer capacitance, polarization resistance and solution resistance in the interface between electrode and solution. Electrode process could be evaluated by the electrical impedance analysis. The necessities of the electrochemical cell analysis with high speed impedance analyzer are followings: minimization of the effects of electric stimulation on electrochemical cell and the concentration of reactive materials, and optimization of impedance signal resolution. This paper represents the design criteria for the selection and stimulation to develop fast impedance analyzer prototype for a electrochemical cell. It was suggested that the design of 470k sample/s sampling rate, 13 bit ABC resolution, and 140ms recording time is required for high speed impedance analysis system in frequency range between dc and 10kHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1132-1133
• /
• 2007

A circuit-domain model of PWM inverter provides accurate simulation results in consideration of detail switching characteristics. Although, a huge amount of computation time is demanded for the simulation results of several ten seconds, which is the required time to analyze system behaviors or control performances of Electric Power Steering(EPS) on real drive condition. This paper describes the nonlinear inverter model for fast dynamic simulation of EPS without the PWM concept through analyzing the effect of nonlinear switching characteristics like dead time, forward voltage drop and conduction resistance. Some inverter models including proposed model are compared from two standpoints which are computation time and accuracy. The comparison results show the usefulness of the developed model in order to develop the control algorithm through the fast prediction of system behaviors.

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.89-96
• /
• 2015

Explicit numerical integration methods for power system transient stability simulation require very small time steps to avoid numerical instability. The EXST1 exciter model is a primary source of fast dynamics in power system transients. In case of the EXST1, the required small integration time step for entire system simulation increases the computational demands in terms of running time and storage. This paper presents a practical exciter model reduction approach which allows the increase of the required step size and thus the method can decrease the computational demands. The fast dynamics in the original EXST1 are eliminated in the reduced exciter model. The use of a larger time step improves the computational efficiency. This paper describes the way to eliminate the fast dynamics from the original exciter model based on linear system theory. In order to validate the performance of the proposed method, case studies with the GSO-37 bus system are provided. Comparisons between the original and reduced models are made in simulation accuracy and critical clearing time.