• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.7
• /
• pp.851-858
• /
• 1988

In this paper, we propose two different VLSI architectures for the parallel computation of DCT (discrete cosine transform) algorithm. First, it is shown that the DCT algorithm can be implemented on the existing systolic architecture for the DFT(discrete fourier transform) by introducing some modification. Secondly, a new prime factor DCT algorithm based on the prime factor DFT algorithm is proposed. And it is shown that the proposed algorihtm can be implemented in parallel on the systolic architecture for the prime factor DFT. However, proposed algorithm is only applicable to the data length which can be decomposed into relatively prime and odd numbers. It is also found that the proposed systolic architecture requires less multipliers than the structures implementing FDCT(fast DCT) algorithms directly.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.1-3
• /
• 2020

본 논문은 주파수 분석 방법 중 하나인 Discrete Wavelet Transform (DWT)을 활용하여 태양광 직렬 아크 사고를 검출하는 방법에 관하여 다룬다. DWT 알고리즘은 주파수 도메인에서도 시간 축 정보를 표현할 수 있어 기존의 Fast Fourier Transform (FFT) 주파수 분석 알고리즘과 차이점이 있으며, 대용량 태양광 시스템의 직렬 아크 사고 검출에 최적화 되도록 DWT 알고리즘의 속도를 향상시켜 태양광 DC 아크 사고 안전규격인 UL1699B의 요구 조건을 만족시켰다. DWT 알고리즘의 경우 TMS320F28033 기반으로 구현 되었으며 대용량 PV 시스템 적용을 위해 로고스키코일을 전류 센서로 사용하였다. 또한, 모의 DC 직렬 아크 발생 회로를 구축하여 제작한 사고 검출기의 성능을 실제 아크 발생 조건에서 검증하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.852-863
• /
• 2016

Wood-plastic composite (WPC) is a promising and sustainable material, and refers to a combination of wood and plastic along with some binding (adhesive) materials. In comparison to pure wood material, WPCs are in general have advantages of being cost effective, high durability, moisture resistance, and microbial resistance. The properties of WPCs come directly from the concentration of different components in composite; such as wood flour concentration directly affect mechanical and physical properties of WPCs. In this study, wood powder concentration in WPC was determined by Fourier transform near-infrared (FT-NIR) and Fourier transform infrared (FT-IR) spectroscopy. The reflectance spectra from WPC in both powdered and tableted form with five different concentrations of wood powder were collected and preprocessed to remove noise caused by several factors. To correlate the collected spectra with wood powder concentration, multivariate calibration method of partial least squares (PLS) was applied. During validation with an independent set of samples, good correlations with reference values were demonstrated for both FT-NIR and FT-IR data sets. In addition, high coefficient of determination (${R^2}_p$) and lower standard error of prediction (SEP) was yielded for tableted WPC than powdered WPC. The combination of FT-NIR and FT-IR spectral region was also studied. The results presented here showed that the use of both zones improved the determination accuracy for powdered WPC; however, no improvement in prediction result was achieved for tableted WPCs. The results obtained suggest that these spectroscopic techniques are a useful tool for fast and nondestructive determination of wood concentration in WPCs and have potential to replace conventional methods.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.695-706
• /
• 2014

Partial discharge (PD) measurements have emerged as a dominant investigative tool for condition monitoring of insulation in high voltage equipment. But the major problem behind them the PD signal is severely polluted by several noises like White noise, Random noise, Discrete Spectral Interferences (DSI) and the challenge lies with removing these noise from the onsite PD data effectively which leads to preserving the signal for feature extraction. Accordingly the paper is mainly classified into two parts. In first part the PD signal is artificially simulated and mixed with white noise. In second part the PD is measured then it is subjected to the proposed denoising techniques namely Translation Invariant Wavelet Transform (TIWT). The proposed TIWT method remains the edge of the original signal efficiently. Additionally TIWT based denoising is used to suppress Pseudo Gibbs phenomenon. In this paper an attempt has been made to review the methodology of denoising the PD signals and shows that the proposed denoising method results are better when compared to other wavelet-based approaches like Fast Fourier Transform (FFT), Discrete Wavelet Transform (DWT), by evaluating five different parameters like, Signal to noise ratio, Cross-correlation coefficient, Pulse amplitude distortion, Mean square error, Reduction in noise level.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.06a
• /
• pp.52-57
• /
• 2000

This paper discusses frequency analysis based on frequency spectrum in orthogonal cutting of fiber-matrix composite materials. A glass reinforced polyester (GFRP) was used as workpiece. Analysis method employs a force sensor and the signals from the sensor are processed using a fast Fourier transform (FFT) technique. The experimental correlation between the different chip formation mechanisms and model coefficients are then established. (omitted)

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.851-856
• /
• 1987

A direct computation algorithm of two dimensional fast Fourier transform (2D-FFT) is considered here for implementation in mesh connected multiprocessor array of both a 2D-toroidal and a rectangular type. Results are derived for a hardware algorithm including data allocation and interprocessor communications. A performance comparison is carried out between the proposed direct 2D-FFT computation and the conventional one to show that a new algorithm gives higher speedup under a reasonable assumption on the speeds of operations.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.39-47
• /
• 1994

In this paper, by modeling the Multilayer-Multiconductor Transmission Line(MMTL) with the characteristic parameters-effective dielectric constant, eigen modal voltages, characteristic impedances at each mode, pulse propagation characteristics of MMTL network are simulated. Transmission line modelling is performed in frequency domain, then time domain resposes are obtained by transforming the frequency domain response using fast Fourier transform.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.7
• /
• pp.389-396
• /
• 2004

This paper introduces a new algorithm to calculate distortion power using complex THD(Total Harmonic Distortion) index. The proposed algorithm involves FFT(Fast Fourier Transform) to compute real and imaginary THDs of voltage and current. Case studies are presented to show the availability of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.90.3-90
• /
• 2002

$\textbullet$ Introduction of fuzzy logic controller for dynamic system under irregular disturbance $\textbullet$ Fuzzy rules by displacement information and the frequency characteristics of the system $\textbullet$ Modal analysis for the frequency informations of the system $\textbullet$ Introduction of mode selecting unit(MSU) based on Fast-Fourier transform(FFT) algorithm $\textbullet$ Piezo ceramic as an actuator of flexible structure

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.128-133
• /
• 1993

본 연구에서는 보강 원통쉘에 대하여 주위 유체의 영향을 고려하여 진동 및 음향방사를 해석하였다. 원통셀의 운동방정식은 Donnell 이론을 적용하였으 며, Contour 적분을 풀지 않고 FFT 알고리즘(Fast Fourier Transform Algorithm)을 이용하여 원통쉘의 진동을 계산하였다. 현재까지의 방사패턴에 관한 연구는 주로 원주 방향에 집중되어 왔으나, 보강 원통쉘의 방사패턴은 원추파 모형에 가까우므로 극좌표 .theta. 방향에 대한 음향방사 패턴에 관한 연구가 이루어져야 한다. 그러므로, 본 연구에서는 극좌표에 관한 방사패턴 에 관하여 주로 고찰하였다.