• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.163-172
• /
• 2000

In this study, the scattered far-field due to a cavity embedded in infinite media subjected to the incident SH-wave was calculated by the boundary element method. The effects of cavity shape and distance between internal cavity and internal point in infinite media were considered. The scattered far-field of the frequency domain was transformed into the signal of the time domain by using the Inverse Fast Fourier Transform(IFFT). It was found that the amplitude of scattered signal in time domain decreased with the increase of the distance between the detecting points of ultrasonic scattered field and the center of internal cavity in media. In addition, the time delay was clearly found in time domain waveform as the distance between the detecting points of ultrasonic scattered field and the center of internal cavity was gradually increased.

• 한국소음진동공학회논문집
• /
• 제24권9호
• /
• pp.695-705
• /
• 2014

In this paper, two types of techniques for the prediction of radiated sound pressure due to vibration of a structure are investigated. The prediction performance using wave-number sensing technique is compared to that of conventional prediction method, such as Rayleigh's integral method, for the prediction of far-field radiated sound pressure. For a coupled plate, wave-number components are predicted by the vibration response of plate and the prediction performance of far-field sound is verified. In addition, the applicability of distributed sensors that are not allowable to Rayleigh's integral method is considered and these can replace point sensors. Experimental implementation verified the prediction accuracy of far-field sound radiation by the wave-number sensing technique. Prediction results from the technique are as good as those of Rayleigh's integral method and with distributed sensors, more reduced computation time is expected. To predict the radiated sound by the efficient configuration of structural sensors, composed(synthesized) mode considering sound power contribution is determined and from this size and location of sensors are chosen. Four types of sensor configuration are suggested, simulated and compared.

• 산업기술연구
• /
• 제18권
• /
• pp.131-138
• /
• 1998

Numerical modeling for electromagnetic exploration methods are essential to understand behaviours of electromagnetic fields in complex subsurfaces. In this study, a finite element method was adopted as a numerical scheme for the 2.5-dimensional forward problem. And a finite element equation considering linear conductivity variation was proposed when 2.5-dimensional differential equation to couple eletric and magnetic field was implemented. Model parameters were investigated for near-field with large source effects and far-field with responses dominantly by homogeneous half-space. Numerical responses by this study were compared with analytic solutions in homogeneous half-space and compared with other three dimensional numerical results.

• Earthquakes and Structures
• /
• 제22권4호
• /
• pp.401-419
• /
• 2022

A novel hybrid extreme machine learning-multiverse optimizer (ELM-MVO) framework is proposed to predict the liquefaction phenomenon in seismically excited tunnel lining inside the sand lens. The MVO is applied to optimize the input weights and biases of the ELM algorithm to improve its efficiency. The tunnel located inside the liquefied sand lens is also evaluated under various near- and far-field earthquakes. The results demonstrate the superiority of the proposed method to predict the liquefaction event against the conventional extreme machine learning (ELM) and artificial neural network (ANN) algorithms. The outcomes also indicate that the possibility of liquefaction in sand lenses under far-field seismic excitations is much less than the near-field excitations, even with a small magnitude. Hence, tunnels designed in geographical areas where seismic excitations are more likely to be generated in the near area should be specially prepared. The sand lens around the tunnel also has larger settlements due to liquefaction.

• 한국정보전자통신기술학회논문지
• /
• 제2권1호
• /
• pp.65-72
• /
• 2009

기지국 배열안테나의 근역장 프로빙을 통해 원역장 성능을 평가하기 위해 반사판을 갖는 다이폴 배열 안테나와 프로브 사이 높이에 따른 상호 간의 영향을 분석하였다. 기본 개념은 기지국 배열 안테나의 입력단들과 프로브의 입력 port P 에 대한 근역장에서의 상호 높이를 변화시키며 S 파라미터 측정값을 분석하여 상호결합 효과가 가장 적으면서 프로빙 효율이 높은 위치를 결정하는 것이다. 그리고 여기서 얻어진 높이는 기지국 배열안테나의 정밀한 원역장 성능을 구하기 위한 근역장 프로빙 시스템 설계에 적용 가능할 것이다.

• Coupled systems mechanics
• /
• 제12권2호
• /
• pp.167-181
• /
• 2023

The determination of the blast protection level and the corresponding minimum load-bearing capacity for a laminated glass (LG) window is of crucial importance for safety and security design purposes. In this paper, the focus is given to the window response under near-field blast loading, i.e., where relatively small explosives would be activated close to the target, representative of attack scenarios using small commercial drones. In general, the assessment of the load-bearing capacity of a window is based on complex and expensive experiments, which can be conducted for a small number of configurations. On the other hand, nowadays, validated numerical simulations tools based on the Finite Element Method (FEM) are available to partially substitute the physical tests for the assessment of the performance of various LG systems, especially for the far-field blast loading. However, very little literature is available on the LG window performance under near-field blast loads, which differs from far-field situations in two points: i) the duration of the load is very short, since the blast wavelength tends to increase with the distance and ii) the load distribution is not uniform over the window surface, as opposed to the almost plane wave configuration for far-field configurations. Therefore, the current study focuses on the performance assessment and structural behaviour of LG windows under near-field blasts. Typical behavioural trends are investigated, by taking into account possible relevant damage mechanisms in the LG window components, while size effects for target LG windows are also addressed under a multitude of blast loading configurations.

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.636-643
• /
• 2023

본 논문에서는 원전계 환경에서 위상배열안테나를 고속 보정하는 방법이 제안되었다. 원전계에서 수신된 전력만을 통해 각 안테나 요소를 보정하는 기존 rotating-element electric-field vector (REV) 방법을 간소화 한 최대값 보정 방법과, 각 안테나 요소가 아닌 부배열 단위로 묶어서 보정하는 방법이 제안되었다. PPO 알고리즘을 이용하여 위상배열안테나의 분포에 최적화된 파티셔닝을 찾고, 그에 따른 부배열 단위로 보정하여 기존 방법 대비 더 빠른 보정이 가능한 적응형 최대값 보정 방법이 제안 및 시뮬레이션 검증되었다. 보정이 이루어지는 동안 위상배열안테나의 이득이 더 높을 뿐 아니라, 형성되는 빔 패턴이 기존 방법보다 이상적인 빔 패턴에 더 가깝다.

• 대한토목학회논문집
• /
• 제6권1호
• /
• pp.35-41
• /
• 1986

본 논문에서는 점탄성지반의 지반-구조물 시스템을 해석하는 복합모형기법이 연구되었다. 복합모형은 지반-구조물 시스템을 구조물과 구조물주위의 반구형태의 지반으로 구성된 내부영역과 반구바깥부분의 외부영역으로 나누어 해석하는 방법으로서, 내부영역은 유한요소로 모형화하고 외부영역은 주파수 종속 임피던스로 나타낸다. 점탄성지반에 대한 외부영역 임피던스는 탄성지반에 대하여 구한 임피던스함수에 Hysteretic damping항을 더해주는 방법을 사용하였으며, 이에 대한 검증은 점탄성지반의 강체원형판에 대한 임피던스를 이론적인 값과 비교함으로써 수행되었다. 예제해석은 대형굴뚝에 대하여 수행되었으며, 해석결과를 자주 사용되는 다른 방법에 의한 결과와 비교 검토하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.121-128
• /
• 1999

This paper presents a time domain method for soil-structure interaction analysis for seismic loadings. It is based on the finite element formulation incorporating analytical frequency-dependent infinite elements for the far field soil. The dynamic stiffness matrices of the far field region formulated using the present method in frequency domain can be easily transformed into the corresponding matrices in time domain. At first, the equivalent earthquake forces are evaluated along the interface between the near and the far fields from the free-field response analysis carried out in frequency domain, and the results are transformed into the time domain. An efficient procedure is developed for the convolution integrals to evaluate the interaction force along the interface, which depends on the response on the interface at the past time instances as well as the concurrent instance. Then, the dynamic responses are obtained for the equivalent earthquake force and the interaction force using Newmark direct integration technique. Since the response analysis is carried out in time domain, it can be easily extended to the nonlinear analysis. Example analysis has been carried out to verify the present method in a multi-layered half-space.

• 한국전자파학회논문지
• /
• 제9권4호
• /
• pp.526-534
• /
• 1998

The electric near-fields from a cellular phone's antenna are calculated using TLM method. The cellular phones is assumed to be a conductive box and the frequency is set to be 900 [MHz] and the radiated power is set to be 0.6 [W]. The near-fields and far-field patterns are obtained for wire antennas of 1/4 and 1/2 wavelengths. For the same radiation power, (0.6 [W]), it is found out the near-field for antennal length of λ/2 is much weaker than that for λ/4 antenna. The maximum SAR calculated in a simple head model becomes 1.4[W/kg].