• 한국추진공학회지
• /
• 제4권1호
• /
• pp.93-101
• /
• 2000

엔진 운용 중에 유로(flow Path)에 놓여 있는 팬 블레이드(blade)들은 많은 외부하중에 노출되어 있어서 고주기 피로(high cycle fatigue)에 의한 피로 파괴의 위험성이 크다. 그 중 가장 중요하게 평가되는 것이 주기적인 가진력에 의한 공진 현상과 그에 따른 피로파괴 가능성이다. 본 논문에서는 유동장 (flow field)이 지주(struts)에 의해 영향을 받게 되고, 이러한 유동장의 분포가 지주 후방에서 주기함수 형태로 팬 블레이드를 가진 할 때, 팬 블레이드에서의 진동 응답 특성과 구조적인 안정성을 평가하였다. 팬 블레이드의 피로강도를 시험적으로 평가하고, 팬 블레이드 전방 지주에 의한 공기 가진력을 가정하여 유한 요소 해석을 통한 구조적 안정성을 평가하였다. 그리고 엔진 시험에서 측정된 서지 압력 하중을 팬 블레이드의 유한요소 모델에 적용하여 구조적 영향을 평가함으로써 팬 블레이드의 구조적인 안정성을 확인하였다.

• 한국석유지질학회지
• /
• 제2권2호
• /
• pp.71-81
• /
• 1994

선상지 삼각주는 흔히 깊은 분지로 전진하여 급경사의 전면층을 형성한다. 현생의 급경사 선상지-삼각주는 사태흔적, 츄트/협곡, 스웨일(swale), 로브(lobe), 스플레이(splay). 및 암설낙하(debris fall) 등의 표층 지형에 의해 특징지워진다. 이들은 강하구에서 발생하는 퇴적물 붕괴나 중력류에 의해 생성된다. 고기의 선상지-삼각주 퇴적상은 경사가 급한 전면층과 비교적 경사가 완만한 기저층 및 전삼각주(prodelta)층을 구성한다. 이는 다시 판상 또는 쐐기 모양의 역암 및 사암, 사태 충진층, 츄트/협곡 충진층, 판상층, 열편층, 사태층 등으로 구성된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.919-924
• /
• 2004

A CFA(Cooling Fan Assembly) is composed of a fan, motor and shroud, which is at the back of the automotive radiator. By forcing the wind to pass, the CFA controls the cooling performance of the radiator. The noise and vibration of the CFA may be primarily due to the resonance between the CFA and engine. The Interference among the fan, shroud and radiator by deformation is considered when the CFA is designed. In this paper, in order to analyze the structural vibration of the CFA for automobiles, a finite element model of the CFA is established by using a commercial FEM code. After the finite element modeling, the natural frequencies and the mode shapes are obtained from the FE analysis. The natural frequencies are obtained from the vibration test as well. Then, the results of the vibration test are compared with those of the FE analysis. The natural frequencies obtained by experiment have a great similarity to the results from FE model. We have confirmed the validity of the FE model and verify the structural safety for the resonance. The stress and displacements are obtained from FE analysis. We have confirmed the safety for the interference and failure.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.63-77
• /
• 2017

The failure mechanism of a deep hard rock tunnel under high geostress and high geothermalactivity is extremely complex. Uniaxial compression tests of granite at different temperatures were conducted. The complete stress-strain curves, mechanical parameters and macroscopic failure types of the rock were analyzed in detail. The brittleness index, which represents the possibility of a severe brittleness hazard, is proposed in this paperby comparing the peak stress and the expansion stress. The results show that the temperature range from 20 to $60^{\circ}C$ is able to aggravate the brittle failure of hard rock based on the brittleness index. The closure of internal micro cracks by thermal stress can improve the strength of hard rock and the storage capacity of elastic strain energy. The failure mode ofthe samples changes from shear failure to tensile failure as the temperature increases. In conclusion, the brittle failure mechanism of hard rock under the action of thermal coupling is revealed, and the analysis result offers significant guidance for deep buried tunnels at high temperatures and under high geostress.

• Geomechanics and Engineering
• /
• 제15권4호
• /
• pp.965-972
• /
• 2018

In deep braced excavations, struts and walers play an essential role in the whole supporting system. For multi-level strut systems, accidental strut failure is possible. Once a single strut fails, it is possible for the loads carried from the previous failed strut to be transferred to the adjacent struts and therefore cause one or more struts to fail. Consequently, progressive collapse may occur and cause the whole excavation system to fail. One of the reasons for the Nicoll Highway Collapse was attributed to the failure of the struts and walers. Consequently, for the design of braced excavation systems in Singapore, one of the requirements by the building authorities is to perform one-strut failure analyses, in order to ensure that there is no progressive collapse when one strut was damaged due to a construction accident. Therefore, plane strain 2D and three-dimensional (3D) finite element analyses of one-strut failure of the braced excavation system were carried out in this study to investigate the effects of one-strut failure on the adjacent struts.

• 한국가스학회지
• /
• 제21권2호
• /
• pp.26-31
• /
• 2017

이 논문은 디젤 자동차의 터보차저 시스템에 관련된 고장사례를 연구하기 위한 것이목적이다. 첫 번째 사례는 터보차저를 분해하여 확인한 결과 터보 휠의 파손으로 터빈이 손상되어 작동되지 않음으로 배기관 구멍이 막혀 가속이 되지 않는 것을 확인하였다. 터보차저 장착차량의 경우 높은 회전수에서는 엔진을 바로 정지시키게 되면 고온에 의한 터보의 고착현상이 발생될 수 있으므로 공회전 상태를 충분히 유지한 다음 시동을 끄도록 한다. 두 번째 사례는 터보차저를 작동시키는 VGT 액튜에이터의 로드가 고착되어 가속불량 현상이 발생된 것으로 확인되었다. 세 번째 사례는 알터네이터(Alternator) 저항과 인터쿨로 팬 릴레이 커넥터 오조립으로 인해 주행 중 출력부족 현상이 발생한 것을 확인하였다. 따라서, 터보차저 시스템의 철저한 관리를 통해 고장이 발생하지 않도록 하여야 한다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2005년도 학술발표대회 논문집
• /
• pp.327-337
• /
• 2005

Accelerated life test models and procedure are developed to assess the reliability of Door switch. The main function of door switch is to operate bulb lamp and fan motor. The accelerated life test method and test equipments are developed using the relationship between stresses and life characteristics of the products. Using the developed accelerated life test method, the parameters of the ALT model and life time distribution are estimated and the reliability of the Door S/W at use condition if assessed. The proposed accelerated life test method and procedure may be extended and applied to testing similar kinds of products to reduce test time and costs of the tests remarkably.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.279-288
• /
• 2013

The purpose of this study is to present a case study of six sigma quality improvement practice in cooling fan motor(CFM) manufacturing processes. In this study, the CFM manufacturing process of automobile parts not relevant to the target process rate of the process point of view, in order to reduce the system to solve the problem of localized resolution procedures of six sigma DMAIC methodology was applied to study. In conclusion, this study's field D in order to improve the initial rate of inadequate quality management best practices by applying the method of Six Sigma quality CFM failure through stabilization schemes were proposed cost reduction.To be CFM product to satisfy customers based on continuous monitoring of the effective field of claims quality management system is required.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.903-909
• /
• 2004

A CFA(cooling fan assembly) is composed of a fan, motor and shroud, which is at the back of the automotive radiator. By forcing the wind to pass, the CFA controls the cooling performance of the radiator. The noise and vibration of the CFA may be primarily due to the resonance between the CFA and engine. The Interference among the fan, shroud and radiator by deformation is considered when the CFA is designed. In this paper, in order to analyze the structural vibration of the CFA for automobiles, a finite element model of the CFA is established by using a commercial FEM code. After the finite element modeling, the natural frequencies and the mode shapes are obtained from the FE analysis. The natural frequencies are obtained from the vibration test as well. Then, the results of the vibration test are compared with those of the FE analysis. The natural frequencies obtained by experiment have a great similarity to the results from FE model. We have confirmed the validity of the FE model and verify the structural safety for the resonance. The stress and displacements are obtained from FE analysis. We have confirmed the safety for the interference and failure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.422-427
• /
• 2002

This paper focuses on the formulation and validation of an automatic strategy for the selection of the locations and directions of strain gauges to capture at best the modal response of a blade in a series of modes. These locations and directions are selected to render the strain measurements as robust as possible with respect to random mispositioning of the gauges and gauge failures. The approach relies on the evaluation of the signal-to-noise ratios of the gauge measurements from finite element strain data and includes the effects of gauge size. A genetic algorithm is used to find the strain gauge locations-directions that lead to the largest possible value of the smallest modal strain signal-to-noise ratio, in the absence of gauge failure, or of its expected value when gauge failure is possible. A fan blade is used to exemplify the applicability of the proposed methodology and to demonstrate the effects of the essential parameters of the problem, i.e. the mispositioning level, the probability of gauge failure, and the number of gauges.