• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.99-103
• /
• 2000

This paper describes the development of standard series for turbo blowers. In mass production system, it is very required to standardize blowers to improve the productivity of ordering, estimating, manufacturing. To standardize blowers, we performed researches on the effects of $b_1$(impeller inlet width), $b_2$(impeller outlet width), ${\beta}_1$(blade inlet angle), ${\beta}_2$(blade outlet angle), Z(number of blades) of impellers and geometry of casing experimentally. Through this study, we chose the several best model of turbo blowers with high efficiency and low noise, which represent each specific speed series 63, 80, 100, 125, 160, 200, 250, 315. After the development of such standardized blowers, the test results are used to prepare the fan geometry and performance database for a selection software.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권10호
• /
• pp.3972-3988
• /
• 2020

Existing methods always rely on statistical features to extract local words for microblog user geolocation. There are many non-local words in extracted words, which makes geolocation accuracy lower. Considering the statistical and semantic features of local words, this paper proposes a microblog user geolocation method by extracting local words based on word clustering and wrapper feature selection. First, ordinary words without positional indications are initially filtered based on statistical features. Second, a word clustering algorithm based on word vectors is proposed. The remaining semantically similar words are clustered together based on the distance of word vectors with semantic meanings. Next, a wrapper feature selection algorithm based on sequential backward subset search is proposed. The cluster subset with the best geolocation effect is selected. Words in selected cluster subset are extracted as local words. Finally, the Naive Bayes classifier is trained based on local words to geolocate the microblog user. The proposed method is validated based on two different types of microblog data - Twitter and Weibo. The results show that the proposed method outperforms existing two typical methods based on statistical features in terms of accuracy, precision, recall, and F1-score.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1293-1296
• /
• 2008

As Flat Panel Display become large in format, the data and gate lines turn into longer, parasitic capacitance and resistance increase, and the display signal is delayed. Three dimensional architecture of multiplexing data registration integrated circuit method is used that divides the data line into several blocks and provides the advantages of high accuracy, rapid selection, and reasonable switching speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.407-412
• /
• 2000

Response surface method is employed in optimizing the acoustic performance of automotive engine-cooling axial fans. The effects of modifications in blade geometry on noise reduction are investigated. Taking the far-field noise level as the objective, a quadratic response surface is constructed utilizing D-Optimality condition as the candidate-points selection criteria. It is shown that the quadratic model exhibits an excellent fitting capability resulting in the blade design with low far-field noise level.

• 한국식품영양학회지
• /
• 제27권1호
• /
• pp.128-135
• /
• 2014

The purpose of this study is to analyze the gap in perceived importance-satisfaction rates of foreign Chinese students regarding the university foodservice selection attributes. All statistical analyses are conducted by the SPSS package program (ver 20.0). The results of the statistical analyses are as follows: The validity of the 22 food service selection attributes is being evaluated via the exploratory factor analysis and then five factors are extracted. The five factors are: 'Factor 1. Cleanness and service quality', 'Factor 2. Food quality and price', 'Factor 3. Physical environment', 'Factor 4. Convenience', and 'Factor 5. Service environment'. According to the results of one-way ANOVA, physical environment showed that significant differences across the periods of residence in Korea and the eating frequency at on campus foodservices. On the other hand, the food quality and price, convenience, and service environment showed that significant differences across the periods of residence in Korea. In addition, according to the Importance-Satisfaction Analysis results, 'ventilation of dining room' is the key aspect that university food service managers should reinforce. In conclusion, in order to increase the customer satisfaction rates, the food service managers should not only improve the quality of food and service but also the physical environments of the food service facility.

• 플랜트 저널
• /
• 제10권4호
• /
• pp.24-28
• /
• 2014

본 연구에서는 150 MW 화력발전소를 기준하여 발전소 건설지역의 최저 대기온도 $-17.1^{\circ}C$부터 최대 대기온도 $36.7^{\circ}C$까지를 $3^{\circ}C$의 일정한 간격으로 구분하여 복수기 압력이 증기터빈의 배압조건을 만족하는 대기온도별 송풍기 수량을 검토하였다. 공랭식 복수기는 대기온도 및 송풍기 운전수량 변화에 따른 냉각공기 순환량에 영향을 받아 운전조건이 변경이 되므로, 대기온도가 복수기 설계기준온도 이상의 경우에는 공랭식 복수기 송풍기의 운전수량을 최대로 해야 하고, 대기온도가 복수기 설계기준온도 미만의 경우에는 증기터빈 배압 운전조건을 만족하는 범위 내에서 송풍기 운전수량을 변화시켜 공랭식 복수기에 가해지는 공기 순환량을 감소시키는 것이 안정적인 발전소 운영을 하는 것임을 확인하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.517-522
• /
• 2008

Ventilation rate and filter were selected to simultaneously satisfy indoor air quality and minimize energy consumption in residential housing. The concentrations of indoor particles were calculated using an adapted mass balance model for various ventilation airflow rates. To satisfy the guidelines for indoor concentrations of particles, the minimum ventilation rates of 1.0/h, 0.6/h and 0.4/h were required for MERV11, MERV13 and MERV14, respectively. And the fan power consumptions induced by ducts, a heat exchanger and a filter were calculated for various ventilation airflow rates. The increase in the ventilation rate caused a dramatic increase in the power consumption, but the filter performance did not have much of an effect on the fan power for ventilation airflow rates lower than 0.4/h. The use of the ventilation filter of MERV 14 was suggested at a ventilation rate of 0.4/h when the fan power consumptions were considered in addition to the indoor concentrations of particles and $CO_2$. The use of the MERV14 filter at a ventilation rate of 0.6/h could be more effective than the additional use of an indoor air cleaner when the residential housing unit was ventilated.

• 한국의상디자인학회지
• /
• 제8권2호
• /
• pp.109-123
• /
• 2006

Cosplay is compound of 'costume' and 'play' and teenagerses disguise equally with populace star or cartoon master who like and it is typical culture of character generation as play that imitate to dress and hair style, gestures. Type of cosplay costume get devided as following according to cosplay object. Animation cosplay costume represent person who appear in cartoon and animation equally. Fan cosplay costume imitates entertainer or celebrity. Game cosplay costume represent character of internet on-line Same. Movie cosplay costume is more realistic than animation or game Character as that imitate moviestar. Character cosplay costume is used by commerce purpose brand or event. Characteristics that appeared commonly in types of cosplay costume are as following. First, cosplay costume is consisted of peculiar mechanism that cosplayer perform series progress such as work selection, design development, manufacture, production, acting alone in aspect of Performance costume. Second, according to cosplay object, degree of representation became different. Character is stronger, because the characteristic is emphasized, tendency that degree of reproduction becomes low showed. Third, cosplayer's distiction appeared according to material selection, design development method and analysis.

• 유통과학연구
• /
• 제5권1호
• /
• pp.41-56
• /
• 2007

최근 국내 할인점시장이 포화상태에 근접하고 있다는 인식과 할인점간 경쟁이 심화 되면서 중국 등 주변 국가들로의 출점이 본격적으로 확대되고 있다. 본 연구는 이러한 상황에서 한국과 중국 소비자의 점포선택속성 및 요인에 있어서 어떠한 차이가 있으며, 그 차이를 야기하는 요인이 무엇인지를 살펴보는 데 연구의 목적을 두었다. 한·중양국의 할인점을 이용하는 소비자를 대상으로 할인점선택 시 주요 속성인 환경, 입지, 가격, 상품, 판촉, 인적 서비스 등 6개 요인에 대한 t-test를 실시하였다. 분석결과 할인점 이용에 있어서 한국인과 중국인의 할인점선택속성 6개의 요인 중 할인점의 입지 및 할인점의 가격에 대하여 한국인과 중국인 두 집단 간의 선택속성에서 유의적인 차이를 보였으나, 나머지 4개의 속성요인은 대부분이 유의적인 차이가 나타나지 않았다. 따라서 이러한 결과를 중심으로 중국시장 진출시 공통적으로 적용해야할 요인과, 국가별 특성에 따라 차별화해야할 전략적 시사점을 도출하였다.

• 대한구순구개열학회지
• /
• 제2권1_2호
• /
• pp.29-41
• /
• 1999

구순구개열은 악안면의 선천기형중 발생빈도가 가장 높은 것으로 알려져 있으며,출생시부터 성장이 완료되는 시기까지 일관된 치료계획에 의한 종합적인 진료체계가 필수적이다. 구순구개열이 존재할 경우 구개부의 조기 봉합후의 반흔조직 형성으로 인한 치열궁의 협착 또는 중안모의 함몰 경향과 함께 상악 측절치의 선천적 결손 또는 기형치, 전치의 회전과 경사 등이 수반되므로 교정치료에 의한 기능적, 심미적인 치열의 회복이 필요하게 된다. 구순구개열 환자의 교정치료에 있어서 상악치열의 정상적인 배열과 구치부 반대교합의 치료를 위해 상악골 확대가 종종 필요하며, 이를 위하여 Hyrax appliance, Quad-helix 및 Fan-type expansion screw, Jointed fan type expander 등 다양한 장치가 활용될 수 있다. 심하지 않은 구순구개열 환자의 교정치료에서 상악골 확대를 위한 장치의 선택은 환자의 치열궁 형태, 연령, 구치부와 전치부의 치열궁 폭경 등 다양한 요인이 고려되어야 하며, 치료 후 악궁형태의 보정에 특별한 주의를 기울여야 할 것이다.