• International Journal of Fluid Machinery and Systems
• /
• 제5권2호
• /
• pp.65-71
• /
• 2012

The objective of the present investigation is to explore the possibility of improving the performance of a centrifugal fan at low Reynolds numbers using a simple passive means, namely Gurney flap (GF). GFs of 1/$8^{th}$ inch brass angle (3.175 mm) corresponding to 15.9% of blade exit height or 5.1% of blade spacing at the impeller tip are attached to the impeller blade tip on the pressure surface. Performance tests are carried out on the centrifugal fan with vaneless diffuser at five Reynolds numbers (viz., 0.30, 0.41, 0.55, 0.69, $0.82{\times}10^5$, i.e., at five speeds respectively at 1,100, 1,500, 2,000, 2,500 and 3,000 rpm) without and with GF. Static pressures on the vaneless diffuser hub and shroud are also measured for each speed at four flow coefficients [${\phi}$=0.23 (below design flow coefficient), ${\phi}$=0.34 (design flow coefficient), ${\phi}$=0.45 (above design flow coefficient) and ${\phi}$=0.60 (above design flow coefficient)] with and without GF. From the performance curves it is found that the performance of the fan improves considerably with GFs at lower Reynolds numbers and improves marginally at higher Reynolds number. Similar improvements are observed for the static pressures on the diffuser hub and shroud. The effect of Reynolds number on the performance and static pressures is considerable. However the effect is reduced with GFs.

• 한국추진공학회지
• /
• 제21권6호
• /
• pp.83-90
• /
• 2017

복합형 로터항공기의 터보샤프트 엔진에 대한 성능해석을 수행하였다. 복합형 로터항공기의 개념으로 팁제트 방식과 덕티드팬 방식의 형태를 이용하였다. 터보샤프트엔진에 대한 성능해석은 Gasturb 12 소프트웨어를 이용하여 수행하였다. 팁제트 방식의 항공기는 주어진 임무조건에서 최대출력 약 1,600 hp 대가 요구되며, 덕티드팬은 설계점에서 약 1,000 hp 대의 출력이 요구된다. 이것은 팁제트의 경우 제자리비행 시 부가적인 보조압축기 구동이 필요하며, 동력장치에 높은 출력을 요구하고 있기 때문인 것으로 파악된다. 또한 연료소모량의 경우 팁제트 방식이 덕티드팬에 비해 약 2.8배정도 소모되어 연료 효율 측면에서 덕티드팬 방식의 항공기가 보다 우수한 특성이 있음을 알 수 있다.

• Composites Research
• /
• 제34권6호
• /
• pp.337-344
• /
• 2021

본 연구에서는 복합재료 팬 블레이드 도브테일 요소의 인장하중에 따른 점진적 파손거동을 유한요소 시뮬레이션을 통한 수치적 연구를 수행하고, 인장시험을 통하여 정확도를 검증한다. 도브테일 요소는 터보 팬 엔진의 팬 블레이드를 디스크와 결합시키는 조인트의 하나로, 통상 티타늄 등의 금속 재료로 제작되나 경량화 등의 이유로 복합재료의 적용이 연구되고 있다. 하지만 복합재료를 이용한 팬 블레이드 제조과정에서 드롭오프 플라이(Drop-off ply), 수지 포켓(resin pocket) 등의 제조 결함이 필연적으로 발생한다. 이러한 제조 결함이 복합재료 팬 블레이드 도브테일 요소에 미치는 영향을 확인하기 위해 유한요소모델을 이용한 수치해석을 수행하여 예측 결과와 인장시험 결과를 비교 분석한다. 이때 층간분리(delamination) 거동을 모사 가능한 응집영역 모델을 적용하였다. 결론적으로, 열 잔류응력 및 두께방향 압축하중에 의한 계면 물성 강화 효과를 고려하여 유한요소 해석결과와 시험결과 간의 높은 상사성을 얻을 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.292-296
• /
• 1992

There are lots of disturbance in the super heater temperature control system of power plant boiler as follows. 1.Burner light off. 2.Excess Air. 3.Burner tilt. 4.G.R fan flow. Temperature control system of super heater in the power plant has delay time about 5 min. So it is difficult to control the super heater temperature in the power plant. This paper show us the application of domestic development DCS to control the super heater temperature in seoul #5 thermal power plant unit.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1450-1452
• /
• 2009

In this work, a plastic diffuser which has a surface similar to Sinusoidal wave profile for application of LC D backlighting is proposed. This new pattern diffuser is achieved the values of the transmission efficiency an d diffusion efficiency all over 70%, and it also has the value about gain over 1.1. Additionally, this new patter n diffuser has high uniformity when we put it in the LCD backlight module and its thickness is only 2mm. With these foregoing properties, this diffuser film can widely applied to LCD displays systems etc.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.684-685
• /
• 2009

• 충청수학회지
• /
• 제26권3호
• /
• pp.533-539
• /
• 2013

In this paper, using the E-convexity, we introduce the generalized E-KKM map, and next prove the generalized E-KKM theorem which generalizes the KKM theorem due to Fan [4]. As an application, a fixed point theorem in E-convex sets is given.

• Journal of Photoscience
• /
• 제8권2호
• /
• pp.71-71
• /
• 2001

• 분석과학
• /
• 제8권4호
• /
• pp.1069-1074
• /
• 1995

The application of scanning electrochemical microscopy to the imaging of surfaces in water and air and to the study of the electrochemistry of single molecules is discussed.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.168-176
• /
• 2015

The history of paper folding had continued before that the paper manufacturing technique was spread in the 3rd century and it was used for witchcrafts and rituals. Fold means as was used with the word Cheop and Jeopji. In the Three Kingdoms period, the conical hat with fabric spread as customs, then it was made of the paper that led the popularization of paper folding form the early Joseon Dynasty. Paper crafts and living things with paper are mostly derived from fabrics except the paper written for saint's name related God. In the period of the tribe nation, witchcrafts and rituals brought to Japan via the Korean Peninsula, as a result Kami which means God in Japanese that becomes the paper. The first folding fan was made to develop from the fan, Baekseopsun in the end of Goryeo Dynasty. It was an outstanding application of paper folding crafts. Since the early Joseon Dynasty, paper flower folding has considered as the virtue of savings and has developed one of the Korean traditional paper arts. Paper folding has also developed in the practical uses like the other Korean paper arts but paper folding that was developed as seasonal customs, playing or religious purpose showed a different trend from Korean paper arts.