• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.7
• /
• pp.1109-1120
• /
• 2009

This study develops a fitted torso type basic pattern for men by utilizing 3D body scan data. Recent fashion trends are reflected in the development of the pattern. The subjects were 15 men in their 20's, who wear size 95 (M size). Body scan data was obtained through a 3D whole body scanner (WB4, Cyberware, USA), and a body surface development figure for developing male fitted torso type basic pattern was attained through the use of Rapid Form 2006 as well as Auto CAD 2006 programs. The results are as follows: A body surface development figure through body surface segment method showed high exactitude in an error range of 100$\pm$1%. In addition, it occurred in an error range of 100:1:3% because of the hard scanning conditions in the incline of the shoulder and armpit areas. However, the body surface development figure as well as the direct measurement results can be used as basic data for the given patternmaking since the error range falls into 100$\pm$3%. Dart amounts obtained from the average cross section were center back 2.2cm (24.3%), back armpit point 3.8cm (41.8%), front armpit point 3.0cm (33.9%). As shown the jacket pattern, the biggest dart amount was portioned out at the back armpit point. The drafting equations for the development pattern acquired are as follows; Full width=C/2+5cm, back length=height/4-1cm, armhole depth=(C/10+12cm)+3cm, back width=2C/10+2cm, front width=2C/10. The development pattern was a fitted torso basic pattern that was composed of 3 pieces, so it would be very useful in developing shirt or jacket patterns. According to the results of the evaluation of the developed pattern appearance, it obtained higher scores of over 3.5 points in almost items, meaning that the developed pattern is appropriate for a male fitted torso type basic pattern. It suggests a possibility of patternmaking from a body surface development figure in 2-D to prototype.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.487-489
• /
• 2016

In this paper, quad copter provides a method for preventing the possibility of accident in the air during a formation flight. The existing studies had a few studies upon the falls because quad copter formation flight was generally implemented indoors. Therefore, in this paper, we provide a self-diagnosis system to prevent a secondary accident for mismatching the Proportional-Integral-Derivative(PID) and detecting an abnormal communication modules each others in formation flying system. Scheme to be proposed, a system is that when one of the node meets a problem, the header node is sending the information of the current state to the server in the first and making a diagnosis itself in order to avoid the problems caused by dropping from the air. Therefore, if the difference between PID value of header node and slave node is greater than specified values or if it detects a defective sensors and communication modules, the proposed system is set to provide for moving toward a safe place. As a result, we expect that this proposed system is possible to minimize additional incidents by self adjusting the height through a self-diagnosis discovering flawed the acceleration sensor, gyro sensor and various attached sensors.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.211-222
• /
• 2011

In this paper a structural analysis of the PWR(pressurized water reactor) canister with 102cm diameter is carried out to evaluate the structural safety of the canister for the impact force occurring at the moment of collision with the ground in the falling plumb down accident from the carriage vehicle which may happen during the canister handling at the spent nuclear fuel disposal repository. For this, a rigid body dynamic analysis of the canister is executed to compute the impact force using the commercial CAE system, RecurDyn, and a nonlinear structural analysis is performed to compute stresses and deformations occurring inside the canister for this computed impact force using the commercial FEM code, NISA. From these analysis results, the structural safety of the canister is evaluated for the falling plumb down accident from the carriage vehicle due to the inattention during the canister handling at the repository. The rigid body dynamic analysis performed assuming the canister as a rigid body shows that the canister falls plumb down to the ground in two types. And also it shows that early collision impact force is the biggest one and following impact forces decrease gradually. The height of the carriage vehicle in the repository is assumed as 5m in order to obtain the stable structural safety evaluation result. The nonlinear structural analysis of the canister is executed for the biggest early impact force. The structural analysis result of the canister shows that the structural safety of the PWR canister is not secured for the falling plumb down accident from the moving carriage vehicle because the maximum stresses occurring in the cast iron insert of canister are bigger than the yield stress of the cast iron.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.7
• /
• pp.375-384
• /
• 2019

The purpose of this study was to investigate the effects of long-term aerobic dancing exercise on body composition, physical fitness and mental function in older women over 70 years old. All subjects were limited to older women aged 70 to under 85. The experimental group performed aerobic exercise of 2-3 times a week for 9.2 ± 4.6 yrs, and the control group did not perform any regular exercise and spent 3-4 times a week mainly in the relaxing facility for older. As a results in this study, the weight, muscle mass and body fat percentage of the aerobic group were not significantly different from those of the control group, but there were significantly positive effects of aerobic group in visceral fat mass, abdominal obesity rate(%), body water content and systolic blood pressure(p < .05). In terms of physical fitness, Sit & reach, one-legged stand (right) and TUG of the aerobic group were significantly higher than those of the control group(p < .05), but there were no significant differences between two groups in the shoulder flexibilities and grip strength. MMSE as a cognitive function was not significantly different between the two groups, but GDS was significantly lower in the aerobic group than in the control group(p < .05). According to the correlation analysis between all variables and MMSE and GDS, MMSE was significantly inversely correlated with height (r = -0.425)(p < .05), and no correlation was detected with other variables. However, GDS have signitively negative correlations with resting heart rate(r = -0.464), sit & reach(r = -0.525) left(r = -0.491) and right grip strengths(r = -0.635) as well as positive correlation systolic blood pressure(r = 0.482) and TUG (r = 0.479), respectively(p < .05). In conclusion, long-term aerobic exercise of elderly women over 70 older had positive effects on variables related to metabolic disease (visceral fat and resting heart rate), silver fitness variables related to falls, and depression level in the elderly.