• 보존과학연구
• /
• s.34
• /
• pp.64-81
• /
• 2013

It is not easy to define the priority criteria of the need of conservation treatment for stone cultural heritage, although many of them have been treated and restored over the past decade. This study approached the correlation between damage grade and the need of conservation treatment based on damage diagnosis of stone cultural heritage carried out from 2001 to 2005. The number of Third-graded (from First to Fifth-grade) stone heritage in deterioration was the highest among state-designated stone cultural heritage. The Fourth-graded stone cultural heritage (143 in total) was mostly influenced by high physiochemical deterioration, whereas the Fifth-graded ones (61 in total) was dominantly affected by biological colonization. It was estimated that total 211 stone cultural heritage were treated for conservation and restoration from 2002 to 2011. They were usually cleaned (total 134, 26.1%), joined and consolidated, and maintenance works as shelter construction, drainage installation and surrounding cleaning were carried out for some of them. The number of conservation intervention increased with the high deterioration grade, and the case number of metamorphic and sedimentary rocks. By age, the stone cultural heritage in Three-kingdom Period were treated the most, and other heritage in Unified Shilla, Goryeo and Joseon showed an approximate ratio. The stone cultural heritage fallen in the fifth-grade in deterioration demonstrated the highest ratio, approximately 80% of conservation intervention. These results can be used as preliminary data to define the emergency criteria for conservation intervention policy.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.2
• /
• pp.107-120
• /
• 2005

To study the development of solid waste compost to use sewage sludge and paper mill sludge for reclaiming damage soil in forest, the changes of temperature, moisture, chemical properties, heavy metals and harmful compound during the aerobic decomposition were investigated, and the compost decomposition of final products investigated the round paper chromatography method and G.I(Germination index) value. The results were summarized as follows. Temperature was changed a little during early 5days because of air temperature too low. That was rapidly increased to over $50^{\circ}C$ at 4days after first turning and then decreased gradually fallen to $40{\sim}50^{\circ}C$ at 15days after aerobic decomposition in A and C treatments. The second turning was conducted at 18 days after aerobic decomposition, and then the temperature was little changed. At the compare first with terminal product, The moisture content was decreased all treatments but the change was little in A and B treatments. pH was decreased to below 1 in all treatments. EC was increased to below 5dS/m. The content of total carbon, C/N ratio, $NH_4{^+}-N$ were decreased with 4~7%, below 8 and below 500mg/kg in all treatments, respectively. The content of total nitrogen, $NO_3{^-}-N$, CEC were increased with below 0.5%, below 173mg/kg and over $30cmol^+/kg$ in all treatments, respectively. The content of heavy metals and harmful compound were similar during aerobic decomposition and suited to standard of 가 grade in all treatments. The result of round paper chromatography method and G.I. value, The C treatment concluded well aerobic decomposition. Especially, the G.I. value in C treatment was 64.1 and 66.2 at cabbage and grass, respectively.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.1
• /
• pp.21-27
• /
• 1998

This experiment was conducted to increase aromatics in roots of Condonopsis lanceolata by applications of organic matters. Fresh root wt. was increased by conifer/moss application to 79.1g per plant. Crude protein content was also higher at rice straw application than native soil application and crude saponin content was increased by conifer/moss application, but contents of crude fat, fiber and ash were not different in all treatments. Although contents of K, Ca, and Mg were increased by rice straw application, Fe, Mn, Zn, Na and Cu were not significantly different in all treatments, The highest free amino acid was arginine, it was increased by the application of fallen leaves and the highest yield (0,008%) of essential oils was obtained by conifer/moss application. As a result, to produce C. lanceolata plant showing higher quality and aromatic essential oils, it was considered that the most effective organic matter showing high yield and higher aromatic constituents was conifer/moss application of over 3M/T per 10a.

• Korean journal of applied entomology
• /
• v.12 no.2
• /
• pp.71-78
• /
• 1973

The study was performed to clear the effects of thiamine, biotin, nicotinic acid, pyridoxine, inositol, deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) on the mycelial growth and the sclerotial production of Sclerotium rolfsii Sacc. isolated from Magnolia kobus. The results are abstracted as follows: 1. Tested fungus was thiamine- deficient and required thiamine 20r/l for maximum growth of mycelia. At higher concentrations than thiamine 20r/l, however, mycelial growth was decreased with increasing the concentrations and was inhibited little less than that of thiamine-free control at 150r/l. 2. The effecfivenesses of the nitrogen sources on the mycelial growth under the thiamine presence were recognized in order of $NH_4NO_3>(NH_4)_2SO_4 >asparagine> KNO_3$, and on the sclerotial production were $KNO_3>NH_4NO_3>asparagine>(NH_4)_2SO_4$. The optimum concentrations of thiamine were about 12r/1 in $KNO_3$, about 16r/1 in asparagine on the growth of mycelia, and were about 8r/l in $KNO_3\;and\; NH_4NO_3,\; 16r/1$ in asparagine on the production of sclerotia. 3. After the organism began to grow, the pH value of cultral filtrate was rapidly dropped down to about 3.5. Hereafter it was slowly fallen down as the growth amount was increased, but was not depreciated below pH 2.2. 4. Nicotinic acid was not effective individually on the mycelial growth and the sclerotial formation of tested fungus without thiamine, but slight effect of it was recognized with thiamine 10r/l, even though maximum growth was shown at 7-10mg/1. Beyond that concentration, however, mycelial growth was rather depressed. 5. When ammonium sulphate or asparagine as the nitrogen sources was used, pyridoxine, biotin and inositol had not any effectivenesses on the mycelial growth and the sclerotial production of examined fungus. 6. In the concentrations of thiamine, biotin, pyridoxine and inositol, as long as thiamine was not added in those, their correlating effects on the growth of the organism were not observed at all. Equivalent or more effects on the mycelial growth were recognized in combinations of thiamin + pyridoxine, thiamine + inositol, thiamine + biotin + pyridoxine, and thiamine + biotin + pyridoxine + inositol compared with thiamino alone, and in combinations of thiamine + biotin and thiamine + biotin + inositol, mycelial growth was inhibited rather than that of thiamine alone. Sclerotial production of those combinations was increased more than that of thiamine alone in dry weight. 7, The little effects of DNA and RNA on the mycelial growth of the organism were recognized compared with the control(DNA-and RNA-free), and RNA was more effective than DNA. Maximum growth of mycelia was observed at RNA 2-6mg/1 and DNA 6mg/l. No effectivenesses on the sclerotial production were recognized in the RNA and DNA. 8. Mycelial growth of the organism was increased with increasing the concentrations of the RNA and the thiamine, that is, the effectiveness of RNA was revealed apparently under presence of thiamine, but was not shown in the sclerotial formation.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.583-592
• /
• 2014

This study was carried out to investigate the operational time and productivity of logging operation by chain saw, yarder attached on tractor, tower-yarder, mini-truck, mini-forwarder, and chipping operations by mini-chipper, large-chipper in order to develop the efficient logging operation system for utilization of forest-biomass. As a result, the average felling and bucking time using chain saw at the site 1 and 2 was observed to be 182.7 sec/cycle and 518.5 sec/cycle respectively. The average yarding time was 202.5 sec/cycle using yarder attached on tractor and 295.1 sec/cycle using tower-yarder. The average forwarding time was 2,073 sec/cycle using mini-truck and 2,248.4 sec/cycle using mini-forwarder. The operational time of felling and bucking using chain-saw can be delayed according to the direction of fallen trees. The selection of felling direction is very important to yarding operation because the direction between width-yarding and felling are interrelated. Productivity can be improved through educating and training operators in the yarding operations. Mini-forwarder is needed to use because of higher productivity and lower cost than mini-truck. The operational productivity of felling and bucking by chain saw was $66.96m^3/man{\cdot}day$ and $43.86m^3/man{\cdot}day$ at site 1 and 2 respectively. The yarding productivity was $5.68m^3/man{\cdot}day$ by yarder attached on tractor, $10.74m^3/man{\cdot}day$ by tower-yarder. The forwarding productivity was $21.29m^3/man{\cdot}day$ by mini-truck, $28.57m^3/man{\cdot}day$ by mini-forwarder. The chipping productivity was $4.42m^3/man{\cdot}day$ by mini-chipper, $21.87m^3/man{\cdot}day$ by large-chipper.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.655-665
• /
• 2000

Taking account of the structural variation on species composition by topography, the successional trends were comparatively analyzed for the three topographic positions (valley, mid-slope, and ridge) in the natural deciduous forest of Mt. Chumbong area. The analysis was based upon the subsequent process of generation replacement by understory saplings and seedlings over the overstory trees which will be eventually fallen down. This study adopted the plot sampling method, establishing twenty $20m{\times}20m$ quadrats and collecting vegetation and site data on each different topographic position. The transition matrix model, which was modified from the mathematical theory of Markov chain, was employed to analyze the successional trends and thereafter to predict the overstory species composition in the future for each different topographic position. In valley, the simulation indicated the remarkable decrease in the proportion of species composition of present dominants Quercus mongolica and Fraxinus mandshurica from current 23% and 21% to around 4% of each at the steady state, which is predicted to take less than 200 years. On the other hand, the proportion of such species as Abies holophylla, Acer mono, Tilia amurensis, and Ulmus laciniata will increase at the steady state. In mid-slope, the result showed the remarkable decrease in the proportion of Juglans mandshurica, Kalopanax pictus, and Tilia amurensis from current 15%, 8%, and 15% to 2%, 1%, and 5%, respectively, at steady state predicted to take more than 250 years. In ridge, the current dominant Quercus mongolica was predicted to be decreased dramatically from 58% to 8% at steady state which could be achieved about 200 years. On the contrary, the proportion of Acer mono and Tilia amurensis will be increased from current 4% and 3% to more than 20% and 40%, respectively, at the steady state. Overall results suggested that the study forest is more likely seral rather than climax community. Even though a lot of variation is inevitable due to various kinds of site and vegetation development, the study forest is considered to be more than 200 years away from the steady state or climax in terms of overstory species composition.

• Information Systems Review
• /
• v.18 no.1
• /
• pp.157-175
• /
• 2016

Under the market economy of capitalism, several limitations reveal the inequity and redistribution problem of wealth, inefficiency of over-manufacturing and over-consumption, pollution of the natural environment, and the constraint of human liberty and dignity. The new challenge of symbiotic relationships that encourage individual corporations coincides with the need to practice social responsibility and share values to overcome these limitations. Social economy and the social enterprises that simultaneously pursue the making of corporate private profits and the realization of social values have been suggested and disseminated as alternative social value creators. Furthermore, the concept of a sharing economy, which refers to the sharing of things rather than owning them, is growing traction as a new paradigm of capitalism. However, these efforts of social enterprises have fallen short against the conflicts between private profit and social values. This study deals with the case of a start-up social corporation, "Purun Bike Sharing Inc.," which is based on a regional sharing economy business model about bike rental services that use Information and Communication Technology (ICT). This corporation pursues harmonic management to achieve a balance between private profit and social value. Its corporate mission is to achieve sharing, coexistence, and contribution for public welfare. This mission is a possible idea for use in the local community network as a core key for sustainable social enterprises. The model can also be an alternative approach to overcome the structural friction in the social corporation. This study considers the case of Purun Bike Sharing as a sustainable way to practice a sharing economy business model based on a regional cooperation network, which can be combined with social value, and to apply ICT to a sharing economy system. It also examines the definition and current state of social enterprises and the sharing economy, and the cases of the sharing economy business model for the review of prior research.

• Journal of Korean Society of Forest Science
• /
• v.88 no.2
• /
• pp.255-265
• /
• 1999

This study deals with forest soil characteristics and their effects on the trafficability of logging vehicles. The study area is the national experimental forest located in Kwangnung. This site has 20m length and is equally divided by 5 surveying ranges with 4m width, on which a tractor(FIATAGRI) attached with logging boogie can drive in 4 driving types, namely 1time-return unload, 1time-return with load of 780-790kg weight of 3 logs, 5 and 10times-return with same load. After one driving type on all surveying ranges, the soil hardness is surveyed 5 times with 3 several type tools, SHM-1 type, lang penetrometer(L-PNTM), and clegg impact soil tester(CIST). A disturbed degree of cover vegetation and sliding conditions of vehicle are also observed. As results, the soil type of the test site was SC by USCS and dry brown forest soil. The cover vegetation is gotten trambled under driving after 3-5 times-return, shrubs leaves are fully fallen and their bark are peeled, and after 10 times-return the cover vegetations were nearly disappeared. The test vehicle has neither slided nor was overthrown. The wheel tracks in the 1-3 ranges, of which unit weight(gd, gt) is high and soil moisture content(MC) is low, were only 1-2cm deep, but those in the 4-5 ranges, of which the gd, gt is low and the MC is high, were 5-7cm deep. In the soil hardness test, which was established in 5 test ranges by types of driving, the more driving times, the higher the hardness. The soil hardness surveyed by L-PNTM has changed slowly and that surveyed by SHM-1 type has risen sharply. In the ranges with higher specific gravity(Gs), higher unit weight, lower MC and higher liquid limit(LL) and plasticity index(PI) was the soil hardness high and the trafficability was good. In the ranges with opposite conditions, also in the ranges of the lower soil hardness, the trafficability must be not good, because the wheel track may be deep. The results from CIST attached with 4kg hammer was not better than expected. So it is recommended to use CIST with 2.5kg or 0.5kg hammer.

• Journal of Korean Society of Forest Science
• /
• v.81 no.1
• /
• pp.53-65
• /
• 1992

For elucidating effective methods of restoration of forest recreational sites where management goals are maintaining naturalness and conserving natural ecosystem, seeding, fertilization and soil surface treatment were used for four years at the devastated forest-floor. For restoration of forest-floor vegetation, factorial experiment was used with a split plot design(main plot : fertilization, subplot : soil surface${\times}$seeding) and a randomized complete block design (fertilization${\times}$seeding) at the Kwanaksan Aboretum, Anyang, Kyonggido. Results were summarized as follows : Soil surface softening with tipping and ripping and straw-mat mulching (70% coverage) treatment was effective on germination, survival and growth of seeded vegetation at devastated forest-floor. Especially, straw-mat mulching treatment was effective on soil surface stabilization and seedling's survival at eroded soil surface, while complete soil surface softening treatment was effective on germination, survival and early growth of tree species of late-successional series. Introducing seeds of native species of pioneer or early-successional series, with good growth capability in barren soil was effective on rapid restoration in devastated forest-floor with its soil surface previously compacted and its surviving seeds washed away. When the seeding and straw-mat mulching after partial soil surface softening with tipping and ripping treatment were employed, it took about three years to restore the devastated forest-floor where surface erosion had been undertaken for an extended period of time and where naturally surviving seeds of native species had been washed away. Softening treatment of soil surface was effective for about two years, and seeding and soil surface treatment increased number of seedlings and improved soil surface environment through fixing of movement of the fallen leaves. Fertilizing effect was not oberserved, mainly due to seeding exposure and poor physical condition including soil surface erosion, low soil water potential and drought, etc, at the field experimental site. However, application of nitrogen and phosphate fertilizers was effective on seedling survival of the species in late-successional series, while lime application adversely affected the seedling survival.

• Journal of Korean Society of Forest Science
• /
• v.97 no.3
• /
• pp.221-228
• /
• 2008

This study was conducted to understand the effect of the different treatment level of head back pruning (HBP) on flowering, fruiting and nut qualities. The average number of pistillate flowers per bearing mother branch (BMB) ranged greatly from 0.5 to 60.0. For all cultivars as the level of HBP treatment increases, the number of pistillate flowers per bearing branch (BB) and BMB decreased. For all cultivars the number of branches developed per BMB began to decrease above 30% HBP treatment level. The number of burrs per BB ranged from 1.0 to 2.0. Within 'Daebo' the number of burrs per BB increased with increasing HBP treatment level. The rate of fallen fruits was the lowest of 22.6% at the 50% HBP treatment level of 'Tsukuba', whereas the rate was the highest in 'Pyeonggi'. Nut weight increased with decreasing the number of burrs per BB. Nut yield per BMB showed a tendency of decreasing with increasing the HBP treatment level. Within a HBP treatment level nut grade indicating nut quality varied greatly among cultivars. For all cultivars except for 'Pyeonggi', the proportion of specially large nuts above the average weight increased as the HBP treatment level increased. The soluble solids content showed no significant difference among the HBP treatment levels just right after harvesting of nuts. After 8 weeks of harvesting, however, the soluble solids content increased about 3.3% to 5.3%. and was highest at the 50% HBP treatment level. There were no significant differences among the HBP treatment levels and cultivars in the nut hardness which is highly related to the storage as well as the initial soluble solid content.