• 한국노년학
• /
• v.40 no.2
• /
• pp.311-323
• /
• 2020

Older adults are at a high risk of falling, causing severe injuries and increased hospital stays and treatment costs. This can be a burden not only on the family but also on the national economy. Thus, fall prevention is very important in nurses' and nursing assistants' work. This study intended to grasp the real situation faced by nurses and nursing-assistants working at geriatric hospitals in J province, Korea. The researcher interviewed thirty-six nurses and nursing-assistants in four geriatric hospitals and performed four focus group interviews. Data were analyzed through an inductive content analysis based on Elo & Kyngäs's approach. Three categories and five subcategories were identified. Categories were patients, environmental, and personal factors. Patient factors included patients' impaired cognitive function. Environmental factors included lack of personnel support and assignment of inpatients without regard to fall risk. Personal factors included hopelessness regarding improvement and fear of being blamed. Promotion of fall prevention practice needs a gradual increase in nursing staff at geriatric hospitals, a system for assigning hospital room according to fall risk, and education and support system to reduce nursing burden.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.630-632
• /
• 2009

The parameters of PID controller should be readjusted whenever system character change. In spite of a rapid development of control theory, this work needs much time and effort of expert. In this paper, to resolve this defect, after the sample of parameters in the changeable limits of system character is obtained, these parametrs are used as desired values of back propagation learning algorithm, also neural network auto tuner for PID controller is proposed by determing the optimum structure of neural network. Simulation results demonstrate that auto-tuning proper to system character can work well.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.117-120
• /
• 2002

This paper is proposed structure which it sees currently the problem point which it follows in the independent space for work which the members who do a same work from the environment which is to fall tile at distance, therefore the MPLS based VPN necessary to follow, it forms the small-scale group which is closed again with the CUG(Closed User Group) it will be able to own jointly information to present a structure, the individual small-scale groups are closed from outside and the group members are the CUG authentication Process for the security maintenance the model which is possible.

• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.51-57
• /
• 2022

In recent years, the government's urban housing expansion policy has resulted in increased construction and remodeling work of residential houses and apartments, causing more industrial accidents at elevator installation sites. Typically, accidents occur during the installation and dismantling of work scaffolds inside the hoistways or using non-standardized work scaffolds due to their structural instability. In view of this, the present study deals with the development of a standardized elevator system scaffolding that can be safely installed outside the hoistway, securing the work platform inside the hoistway. An improved version of the scaffolding system eliminates the need to enter the hoistway for the scaffolding installation, thereby preventing accidents.

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.185-188
• /
• 2002

컴퓨터 망을 이용하는 분산 환경에서 다양한 역할의 작업자간의 컨덴츠를 효율적으로 관리 할 수 있는 공동 저작용 협업 시스템을 구현한다. 공동저작을 위한 협업 시스템의 기반기술인 메시징 엔진 개발과 자료 공유를 위한 컨텐츠 네트워크 관리, 참석자간의 편리한 의사교환 기능을 지원하는 프로그램 소프트웨어를 구현하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.11
• /
• pp.5-14
• /
• 2018

Worldwide, soil compaction work is one of the most important activities that are carried out on civil engineering works sites. Compaction work, particularly in the area of road construction, is considered to be important, as poor compaction work is closely related with poor construction even after a construction is complete. Currently, the plate bearing test or the sand cone method relative to the unit weight of soil test are commonly used to measure the degree of compaction, but as these require a great deal of time, equipment and manpower, it is difficult to secure economic efficiency. The method that is used to measure the degree of compaction according to the penetration depth achieved by free fall objects through gravity is the Free-Fall Penetration Test (FFPT), which uses a so-called "portable compaction measuring meter (PCMM)." In this study, the degree of compaction was measured and a penetration depth graph was developed after the field test using the portable compaction measuring meter. The coefficient of determination was 0.963 at a drop height of 10 cm, showing the highest level of accuracy. Both horizontal axis and longitudinal axis were developed in a decimal form of graph, and the range of allowable error was ${\pm}1.28mm$ based on the penetration depth. The portable compaction measuring meter makes it possible to measure the degree of compaction simply, quickly and accurately in the field, which will ensure economic efficiency and facilitate the process management.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.10
• /
• pp.885-890
• /
• 2015

Walking on split-belt treadmill has been applied to study walking disabilities, such as osteoarthritis (OA), to show asymmetric walking characteristics. In this study, we compared asymmetric walking in OA patients with healthy subjects under split-belt conditions and examined the reproduction of walking asymmetry in OA. Seven OA patients were instructed to walk at four frequencies, while four healthy subjects walked on a treadmill with tied-belt and split-belt conditions. To compare walking asymmetries, kinetic and kinematic measurements were made using force-plates and motion capture cameras, and subsequently center of mass (CoM) velocity, mechanical work and potential energy were calculated. Horizontal velocity change during split-belt walking of healthy subjects was similar to OA patients. Difference of mechanical work during single support phase occurred due to fall of CoM in fast belt. OA walking asymmetry could be reproduced by reducing differences of belt speeds to prevent rapid fall of CoM.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.96-101
• /
• 2016

Previous literature has been investigated various aspects of accident occurrence and prevention in construction field. However, those studied were limited in that they only focused on the death accident without considering the loss time accident. Based on this, the goal of current study was to investigate the nature of the loss time accident, and compare the results with the death accident. Results showed that 1) the occurrence rate of death accident was significantly higher in the form work, temporary work, and steel frame work; 2) the temporary work showed significantly higher occurrence rate of the loss time accident and the death accident as compared to others; 3) ratio of the loss time accident to the death accident in domestic construction field was 50:1; 4) fall accident showed biggest occurrence rate in both the loss time accident and the death accident; and 5) more that 80% of workers in both the loss time accident and the death accident was between 41 and 65 years old.

• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.138-142
• /
• 2016

Background: Household waste collectors (HWCs) are exposed to hazardous conditions. This study investigates the patterns of workplace injuries and work-related illnesses of HWCs. Methods: This study uses cases of workplace injuries and work-related illnesses of HWCs that occurred between 2010 and 2011. We analyzed 325 cases of injuries and 36 cases of illnesses according to the workers' age, length of employment, size of workplace, injured part of body, day and month of injury, type of accident, agency of accident, and collection process. Results: There were significant differences in the effect of workers' length of employment, injured part of body, type of accident, agency of accident, and collection process. Results show that most injuries occur in workers in their 50s and older. This study also shows that 51.4% of injuries occur at businesses with 49 employees or fewer. Injuries to waste collectors happen most often when workers are electrocuted after slipping on the ground. The second most prevalent form of injury is falling, which usually happens when workers hang from the rear of the truck during transportation or otherwise slip and fall from the truck. Work-related illnesses amongst waste collectors are mostly musculoskeletal conditions due to damaging postures. Conclusion: These findings will be instructive in devising policies and guidelines for preventing workplace injuries and work-related illnesses of HWCs.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.1
• /
• pp.39-48
• /
• 2021

In the past, measures for the reduction of industrial accidents has led the safety and health policy of construction sites by the guidance, supervision and the regulation according to 「Occupation Safety and Health Act」 handled by Ministry of Employment and Labor (MOEL). Nowadays companies realize that due to the factors such as diversification of employment types, outsourcing of hazardous work, new construction method and complicated types of construction, etc., there is a limit on safety management for construction sites as far as it is passively led by the governmental safety management policy and regulation. In this study, in order to practice the autonomous safety management escaping from the government-led safety management, improvement plans are proposed and applied by analyzing the basic cause of the all kinds of fall accidents that could possibly occur in the apartment construction sites and by verifying the hazardous factors and risks by fields.