• Safety and Health at Work
• /
• 제6권2호
• /
• pp.97-103
• /
• 2015

Background: This paper describes the development of a scale for measuring safety climate. Methods: This study was conducted in six manufacturing companies in Iran. The scale developed through conducting a literature review about the safety climate and constructing a question pool. The number of items was reduced to 71 after performing a screening process. Results: The result of content validity analysis showed that 59 items had excellent item content validity index (${\geq}0.78$) and content validity ratio (> 0.38). The exploratory factor analysis resulted in eight safety climate dimensions. The reliability value for the final 45-item scale was 0.96. The result of confirmatory factor analysis showed that the safety climate model is satisfactory. Conclusion: This study produced a valid and reliable scale for measuring safety climate in manufacturing companies.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.127-134
• /
• 2012

Plant safety management that is enforcing introducing more than 95% in domestic manufacturing industry is using total plant efficiency by the evaluation index, and as a result, can see a lot of examples that plant productivity, economy and safety is increased. The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. This study's purpose centers plant safety management activities that is management system for plant production and safety efficiency's maximization, plant evaluation system that plant safety management activities factor(reliability, maitainability, safety, service quality) that is enforcing in manufacturing industry can develop evaluation model that can evaluate qualitative activities by quantitative activities in process that maximize plant safety management wishes to do design.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1931-1936
• /
• 2016

In this paper, we analyzed causes of accidents that recently increased in the illegal and defective LED lamps. They were analyzed by the electrical characteristics calculation and reappearance experiments. The causes of the accidents were analyzed from the circuit affected by the variation of voltage, current and power by harmonics. We drew a conclusion for electrical safety in illegal or degraded LED lamps from the analysis result. The management factors for electrical safety in LED lamps were harmonics, reactive power and power factor. It is possible to secure the electrical safety through monitoring of power factor in failure products and available in smart meters or smart distribution boards.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 토목섬유 학술발표회 논문집
• /
• pp.115-122
• /
• 1998

• 한국안전학회지
• /
• 제29권5호
• /
• pp.136-145
• /
• 2014

This article has compared the level of activities of occupational safety and health in workplace among sub-sectors of manufacturing industry in order to set the priority for policy intervention. Data of manufacturing industry in the survey on the current status of occupational safety and health was used with factor analysis and radar graphic method. Authors have categorized sub-sectors of manufacturing industry into four categories, attained group, active group, neglected group, and passive group based on injury rate, level of safety and health activities. The neglected group may be the first target group for occupational safety and health policy guiding some detailed occupational safety and health activities. Limitation of this study is that cross sectional data was analyzed. The long term effect could not be analyzed.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.66-71
• /
• 2015

Safety, resilience and comfort of pedestrian were assessed by the British Pendulum Test and SB/GB factor test at 8 kinds of sidewalk pavement. Sidewalk paving materials were normal concrete, porous concrete, concrete block, soil concrete, asphalt, rubber chip/resin mixture, wood chip/resin mixture and floor tile. In addition, a survey was conducted to investigate the perception of pedestrians on the sidewalk paving material. As a result, while the skid resistance value was measured in the most 60BPN above, the floor tile showed a low value of about 30BPN. The ratios of SB factor to GB factor of the elastic pavements(rubber/resin mixture and wood chip/resin mixture) appeared to be relatively large when compared with those of the conventional sidewalks. The survey showed that respondents perceived as more safe and comfortable elastic pavements compared to conventional pavements. Approximately 50% of respondents answered that hardened soil pavement was the most environmentally friendly.

• 한국해안·해양공학회논문집
• /
• 제22권2호
• /
• pp.112-119
• /
• 2010

안전율을 이용하여 항만 구조물의 임의의 파괴모드에 대한 목표파괴/안전수준을 산정할 수 있는 Monte-Carlo 모의법이 제시되었다. 본 연구에서 제안한 해석법은 기존의 해석법과 다르게 단순히 결정론적 설계법으로 설계된 안전율에 대한 자료만을 이용하여 목표파괴/안전수준을 설정할 수 있다. 결정론적 설계법에서 사용되는 안전율과 신뢰성 설계법에서 사용되는 신뢰지수를 직접적으로 연결시켜줄 수 있는 수학적 모형들이 수립되었다. 비록 제한적인 자료를 사용하였음에도 불구하고 수립된 모형들을 직립 방파제의 활동 파괴모드에 적용하여, 유의목표파괴 수준이라는 개념으로 본 연구에서 산정한 직립 방파제의 활동 파괴모드에 대한 목표파괴수준이 최근 일본에서 제안된 결과와 매우 잘 일치하였다.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.81-88
• /
• 2003

Recently, pile foundations were constructed in rough or soft ground than ground of well condition thus it is important that prediction of ultimate bearing capacity and calculation of proper safety factor applied pile foundation design. This study were performed to dynamic loading tests for the thirty two piles at four different construction sites and selected pile at three site were performed to static loading tests and then compare with measured value and value of static and dynamic loading tests. The load-settlement curve form the dynamic loading tests by CAPWAP was very similar to the results obtained from the static load tests. Based on dynamic and static loading tests, the reliability of pile-driving formula were analyzed and then suggested with proper safety factor for prediction of allowable bearing capacity in this paper.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.138-143
• /
• 2012

In this thesis, the relationship between the load carrying capacity and the transformed impact factor of the highway bridges were studied. The bridges are classified according to superstructures type. The result of the comparison between the load carrying capacity and the transformed impact factor, if the load capacity ratio of 0.57, the transformed impact factor was less in order of RC T-beam bridge, RC slab bridge, PC beam bridge, I-beam bridge. By the regression analysis on these results, the empirical formulae to predict the the load carrying capacity of bridge were suggested.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.1-8
• /
• 2009

The studies on semiconductor industrial accident in korea have been focused on the frequencies of each type of safety management employee, characteristics, cause and unsafe conditions, acts and so on. Those attributes of semiconductor industrial accidents were usually analyzed independently, so that it was hard to provides a wel-developed process and systematic guidelines for efficient safety management. Therefore, there were a few studies based on comprehensive survey in terms of the shape type of safe management. The questionnaire survey carried out for the 284 workers who were responsible for safety management in center with cooperation companies in semiconductor industry factor analysis showed that there were three factors of safety management. First, investment and operation and management for accident prevention, Second, unsafe act and condition, safety management Third, general human error and behavior. The industries of respondents were correlative with three groups. Three groups showed statistically significant differences on the number of cases. Actually, the group with the larger investment and the more unsafe cause, human error of accidents prevention had a smaller causes of accident cases.