• 제목/요약/키워드: Fact Detection

검색결과 279건 처리시간 0.034초

외팔보에 대한 가진력수준제어를 통한 피로균열규명기법의 실험적 검증 (Experimental Verifications of Fatigue Crack Identification Method Using Excitation Force Level Control for a Cantilever Beam)

  • 김도균;이순복
    • 대한기계학회논문집A
    • /
    • 제28권10호
    • /
    • pp.1467-1474
    • /
    • 2004
  • In this study, a new damage identification method for beam-like structures with a fatigue crack is proposed. which does not require comparative measurement on an intact structure but require several measurements at different level of excitation forces on the cracked structure. The idea comes from the fact that dynamic behavior of a structure with a fatigue crack changes with the level of the excitation force. The 2$^{nd}$ spatial derivatives of frequency response functions along the longitudinal direction of a beam are used as the sensitive indicator of crack existence. Then, weighting function is employed in the averaging process in frequency domain to account for the modal participation of the differences between the dynamic behavior of a beam with a fatigue crack at the low excitation and one at the high excitation. Subsequently, a damage index is defined such that the location and level of the crack may be identified. It is shown from the analysis of vibration measurements in this study that comparison of frequency response characteristics of a beam with a single fatigue crack at different level of excitation forces enables an effective detection of the crack.

공업용 순 티타늄의 피로거동에서 정류균열에 관한 연구 (A Study on Non-propagating Crack in Fatigue Behavior of Pure Titanium)

  • 김동열;김진학;김민건
    • 대한기계학회논문집A
    • /
    • 제24권4호
    • /
    • pp.1001-1006
    • /
    • 2000
  • To verify the existing theory, non-propagating crack(NPC) does not exist in Ti which fulfills the good conditions for being of NPC, NPC detection in Ti was tried out. Also, the conception of fatigue limit in Ti and a main cause for NPC being were inquired. NPC was detected in both sharp notch root ( $\rho$=0.02mm) and micro pit (diameter = 0.25mm) which held fast to the end under stressing of fatigue limit. Therefore, the existing theory was identified as mistake. But, NPC can not be detected in smooth specimen. This fact would be due to the presumption that NPC is very small or crack does not initiate in smooth specimen. Anyway, the fatigue limit of Ti does not correspond to critical stress of crack initiation but correspond to critical stress of NPC growth. Measurement on the COD of NPC in Ti showed that the crack tip was closed even under the peak stress level at fatigue limit. But, after stress relieving annealing crack tip was opened. Consequently, compressive residual stress which is induced around the crack tip is considered to be the factor causing the NPC being.

An Efficient Complex Event Processing Algorithm based on INFA-HTS for Out-of-order RFID Event Streams

  • Wang, Jianhua;Wang, Tao;Cheng, Lianglun;Lu, Shilei
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권9호
    • /
    • pp.4307-4325
    • /
    • 2016
  • With the aim of solving the problems of long processing times, high memory consumption and low event throughput in the current processing approaches in out-of-order RFID event streams, an efficient complex event processing method based on INFA-HTS (Improved Nondeterministic Finite Automaton-Hash Table Structure) is presented in this paper. The contribution of this paper lies in the fact that we use INFA and HTS to successfully realize the detection of complex events for out-of-order RFID event streams. Specifically, in our scheme, to detect the disorder of out-of-order event streams, we expand the traditional NFA model into a new INFA model to capture the related RFID primitive events from the out-of-order event stream. To high-efficiently manage the large intermediate capturing results, we use the HTS to store and process them. As a result, these problems in the existing methods can be effectively solved by our scheme. The simulation results of our experiments show that our proposed method in this paper outperforms some of the current general processing approaches used to process out-of-order RFID event streams.

Paleoparasitological Surveys for Detection of Helminth Eggs in Archaeological Sites of Jeolla-do and Jeju-do

  • Kim, Myeong-Ju;Shin, Dong Hoon;Song, Mi-Jin;Song, Hye-Young;Seo, Min
    • Parasites, Hosts and Diseases
    • /
    • 제51권4호
    • /
    • pp.489-492
    • /
    • 2013
  • A paleoparasitological survey to detect helminth eggs was performed in archaeological sites of Jeolla-do and Jeju-do, the Republic of Korea. Total 593 soil samples were collected in 12 sites of Jeolla-do and 5 sites of Jeju-do from April to November 2011, and examined by the methods of Pike and coworkers. A total of 4 helminth eggs, 2 eggs each for Trichuris trichiura and Ascaris sp., were found in soil samples from 1 site, in Hyangyang-ri, Jangheung-eup, Jangheung-gun, Jeollanam-do. The egg-recovery layer was presumed to represent a 19th century farm, which fact suggested the use of human manures. This is the third archaeological discovery of parasite eggs in Jeolla-do. Additionally, no helminth eggs in archaeological sites of Jeju-do is an interesting problem to be solved in the further investigations.

신경회로망을 이용한 순 티타늄판재의 음향이방성 평가 (Acoustical Anisotropy Evaluation of Pure Titanium plate Using Neural Network)

  • 박희동;윤인식;이원
    • 한국정밀공학회지
    • /
    • 제28권9호
    • /
    • pp.1103-1109
    • /
    • 2011
  • This research quantitatively confirmed an acoustical anisotropy that exists in a pure titanium plate from the signal of ultrasonic flow detection and suggested a new way to evaluate the acoustical anisotropy by inputting acquired characteristic of ultrasound signal into the neutral network. Using the fact with the suggested method that the characteristic of ultrasound signal is shown differently depending on the pure titanium plate's rolling direction, the neural network was constructed by extracting the characteristic that can decide each direction of $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ with waveform analysis program. As a result of inputting the characteristic of ultrasound signal acquired from a random rolling direction into the neural network that was built like this, it showed a pattern recognition rate higher than 95% on directions of $0^{\circ}$, $45^{\circ}$, $90^{\circ}$.

Actual Conditions and Alternative Materials for the Pesticides containing Persistent Organic Pollutants in South Korea

  • Lim, Young-Wook;Kim, Ho-Hyun;Lee, Jun-Sang;Roh, Young-Man;Lee, Gee-Young;Jung, Hae-Woong;Lee, Jae-Young
    • 한국환경농학회지
    • /
    • 제27권3호
    • /
    • pp.285-291
    • /
    • 2008
  • A global binding agreement was adopted with the leading of United Nations Environment Program (UNEP) on May 22, 2001 in Stockholm to regulate the production and distribution on persistent organic pollutants (POPs). The agreement took effectuation with the ratification of 59 countries from the approval of 151 countries on May 17, 2004. After the approval on October 4, 2001, South Korea performed systematical investigation on POP-related substances such as chlordane, dichloro diphenyl trichloroethane (DDT), hexachlorobenzenes (HCB), heptachlor, polychlorinated biphenyls (PCBs) to get ready for the ratification of the convention with country-specific exemption. The domestic distributions of those chemical substances have been officially prohibited since the late 1960s to the early 1980s. Although there were occasional reports for the detection of some of those chemical substances, those performed minute signification in their existence in the environment. A series of investigation with documentary examination and fact-finding survey showed the possibility for the ratification on the convention without country-specific exemption.

Crowdsourcing Identification of License Violations

  • Lee, Sanghoon;German, Daniel M.;Hwang, Seung-won;Kim, Sunghun
    • Journal of Computing Science and Engineering
    • /
    • 제9권4호
    • /
    • pp.190-203
    • /
    • 2015
  • Free and open source software (FOSS) has created a large pool of source codes that can be easily copied to create new applications. However, a copy should preserve copyright notice and license of the original file unless the license explicitly permits such a change. Through software evolution, it is challenging to keep original licenses or choose proper licenses. As a result, there are many potential license violations. Despite the fact that violations can have high impact on protecting copyright, identification of violations is highly complex. It relies on manual inspections by experts. However, such inspection cannot be scaled up with open source software released daily worldwide. To make this process scalable, we propose the following two methods: use machine-based algorithms to narrow down the potential violations; and guide non-experts to manually inspect violations. Using the first method, we found 219 projects (76.6%) with potential violations. Using the second method, we show that the accuracy of crowds is comparable to that of experts. Our techniques might help developers identify potential violations, understand the causes, and resolve these violations.

Study of body movement monitoring utilizing nano-composite strain sensors contaning Carbon nanotubes and silicone rubber

  • Azizkhani, Mohammadbagher;Kadkhodapour, Javad;Anaraki, Ali Pourkamali;Hadavand, Behzad Shirkavand;Kolahchi, Reza
    • Steel and Composite Structures
    • /
    • 제35권6호
    • /
    • pp.779-788
    • /
    • 2020
  • Multi-Walled Carbon nanotubes (MWCNT) coupled with Silicone Rubber (SR) can represent applicable strain sensors with accessible materials, which result in good stretchability and great sensitivity. Employing these materials and given the fact that the combination of these two has been addressed in few studies, this study is trying to represent a low-cost, durable and stretchable strain sensor that can perform excellently in a high number of repeated cycles. Great stability was observed during the cyclic test after 2000 cycles. Ultrahigh sensitivity (GF>1227) along with good extensibility (ε>120%) was observed while testing the sensor at different strain rates and the various number of cycles. Further investigation is dedicated to sensor performance in the detection of human body movements. Not only the sensor performance in detecting the small strains like the vibrations on the throat was tested, but also the larger strains as observed in extension/bending of the muscle joints like knee were monitored and recorded. Bearing in mind the applicability and low-cost features, this sensor may become promising in skin-mountable devices to detect the human body motions.

Identification and Partial Characterization of Cerein BS229, a Bacteriocin Produced by Bacillus cereus BS229

  • Paik, Hyun-Dong;Lee, Na-Kyoung;Lee, Kwang-Ho;Hwang, Yong-Il;Pan, Jae-Gu
    • Journal of Microbiology and Biotechnology
    • /
    • 제10권2호
    • /
    • pp.195-200
    • /
    • 2000
  • Bacillus cereus BS229 was identified as a bacteriocin producer with a bactericidal activity against Bacillus thuringiensis subsp. Thomsoni BR-40. Bacillus cereus BS229 and cerein BS229, named tentatively as the bacteriocin produced by Bacillus cereus BS229, showed a narrow spectrum of actibity against Gram-positive and Gram-negative bacteria, along with yeast and molds. Production of cerein BS229 in a 5-1 fermenter followed typical kinetics of primary metabolite synthesis. The antibacterial activity of cerein BS229 on sensitive indicator cells disappeared completely by ${\alpha}-chmotrypsin$ or proteinase K, which indicates its proteinaceous nature. Cerein BS229 seemed to be very stable throughout the pH range of 2.0 of 9.0 and it was relatively heat labile, despite the fact that bacteriocin activity was still detected after being boied for 30min. Cerein BS229 actibity has been changed with some of the organic solvents such as toluene, ethanol, and chloroform. Direct detection of cerein BS229 actibity on SDS-PAGE suggested that it had an apparent molecular mass of about 8.2 kDa.

  • PDF

교통신호의 자동최적점제어를 위한 마이크로파 FM-CW 검지계통에 관한 연구 (A Study on Microwave-FM-CW Detection System for the Sutomatic Optimal Point Traffic Control)

  • 양흥석;김호윤
    • 전기의세계
    • /
    • 제22권1호
    • /
    • pp.35-41
    • /
    • 1973
  • An automatic point traffic control method is recommended for more idealistic traffic flow over coarse road netowrks. The automatic control apparatus recommended, consists of a transceiver, amplifier, digital-to-analog converter, signal light controller for emergency and steady state, and digital counter as monitor. The transmitter sends a signal to the target vy means of Microwave-FM-CW and a diode detector picks up the echo signal. Thus the operation of the entire system will be carried out through an open loop state. Some factors necessary for an ideal detector system are rapid response, longevity and stability. An analytical method of the Doppler effect substitutes the conventional frequency deviation into the amplitude of detector output. The changing rate of amplitude is proportional to the voltage of the detector output. Some induced formula from Maxwell's radiation field theory ensures this new method, and, new method, and proves the fact with an experimental data presentation. Stability depends upon Klystron as an oscillator and a diode as a detector. the transceiver installation affects on the response and sensitivity of the system. In accordance with the detector output, several targets are easily classified by amplitudes on the scope. The traffic flow, i.e., target movement which is analyzed by the amplitude method, is shown through the scope and indicates it on the digital counter. The best efficiency for the amplitude analysis can be attained through use of an antenna having the highest sensitivity.

  • PDF