• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.234-240
• /
• 2011

Preventing incidents occurred in construction process is important for safe implementation of construction projects. Due to the complexity and magnitude of the project and moreover, poor safe planning and management, construction incidents in Korea have been increasing. Reducing construction incidents effectively, appropriate safety management program in consideration of the incident rate of each facility is to be adapted. This study analyzes incident frequency and severity rate of each facility based on the data of construction sites(about 1,560 thousand cases) recorded by Korea Occupational Safety & Health Agency for 3 years from 2007 to 2009, and the incident related data (about 40 thousand cases) of Korea Workers' Compensation & Welfare Service. The results of this study revealed that construction incident rates of 'cold refrigeration storage facilities' are the highest among building types, followed by traditional building religious building, arcade department store and shopping center. In case of other facilities, the incident rate and the rate of intensity of 'pipelining project' are the highest, followed by 'tunneling project'. These results would be used in providing safety programs beneficial for preventing construction incidents.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.2
• /
• pp.65-74
• /
• 2021

This study aims to assess the effect of postulated seismic loads on the structural integrity of a spent nuclear fuel dry storage facility. Firstly, three-dimensional modal and response spectrum analyses were carried out. With regard to the latter analysis, the effect of incident angles against two horizontal and one vertical response spectra was also considered. Results showed that even though two critical locations were predicted at the longitudinal axis central part of upper flow path as well as the end discontinuity part of upper and lower flow paths connector, their maximum principal stress values were less than the tensile strength. Moreover, since the influence of vertical angle was 87% higher than that of horizontal angle in particular, which should be carefully handled to demonstrate integrity of the facility.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.78-79
• /
• 2018

The facilities of domestic elderly people are getting higher in the facility due to the rapid increase of the elderly population. Elderly people ability to evacuate the facility such as cognition and walking ability is very low. Therefore, it is necessary to secure the safety of evacuation in case of fire, but the evacuation safety measures in case of domestic fire accidents are insufficient. This study is to identify the problems of the safety of evacuation through the fire case analysis and to propose the measures against it.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.212-221
• /
• 2018

Process safety incidents and loss events can be prevented if we identify and adequately take measures on process safety incident precursors in a timely manner. If we look into and take action against the process safety hazard factors causing the incident in the refinery and petrochemical plant, major process safety incidents can be prevented through eliminating or decreasing hazardous factors. We conducted a survey for the major process safety incident precursor to look specifically into the potential process safety hazardous factors of refineries and petrochemical plants in the Yeosu chemical complex. A self-assessment checklist, which was published by Center for Chemical Process Safety "Recognizing catastrophic incident warning signs in the process industry" on major incidents warning sign, was used for the survey. Through this survey, the major process safety incident leading indicators in the process industry were found by process safety management elements, and each site and/or facility can use these leading indicators for activities for process safety incident prevention. In addition, we proposed action items required to eliminate the root cause of those process safety incident leading indicators.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2064-2071
• /
• 2020

For proton pencil beam scanning (PBS) technology, the accuracy of the dose distribution in a patient is sensitive to the properties of the incident beam. However, mechanical deformation of the proton therapy facility may occur, and this could be an important factor affecting the proton dose distribution in patients. In this paper, we investigated the effect of deformation on an SC200 proton facility's beam isocenter properties. First, mechanical deformation of the PBS nozzle, L-shape plate, and gantry were simulated using a Finite Element code, ANSYS. Then, the impact of the mechanical deformation on the beam's isocenter properties was evaluated using empirical formulas. In addition, we considered the simplest case that could affect the properties of the incident beam (i.e. if only the bending magnet (BG3) has an error in its mounting alignment), and the effect of the beam optics offset on the isocenter characteristics was evaluated. The results showed that the deformation of the beam position in the X and Y direction was less than 0.27 mm, which meets the structural design requirements. Compared to the mechanical deformation of the L-shape plate, the deformation of the gantry had more influence on the beam's isocenter properties. When the error in the mounting alignment of the BG3 is equal to or more than 0.3 mm, the beam deformation at the isocenter exceeds the maximum accepted deformation limits. Generally speaking, for the current design of the SC200 scanning beam delivery system, the effects of mechanical deformation meet the maximum accepted beam deformation limits. In order to further study the effect of the incident beam optics on the isocenter properties, a fine-scale Monte Carlo model including factors relating to the PBS nozzle and the BG3 should be developed in future research.

• Journal of the Korean Society of Safety
• /
• v.12 no.1
• /
• pp.51-59
• /
• 1997

These days leakage incidents of toxic materials cause serious effects on the nearby residents as well as the workers around the accidents accompanying massive material losses and human damages through widening influential areas. The risk measure through adequate quantitative analysis as well as the qualitative analysis of the leakage incidents of toxic materials becomes an urgent issue. The damage of the leakage incident on the surrounding area of the dangerous toxic material facilities was calculated quantitatively by adopting several models in this research. First, the calculations of the leakage velocity from the factories were performed by using source model for the assessment of the influential area, and the damages on the nearly residents were calculated by using the dispersion model and the effort model. The probability of the Incidents was computed based on "The manual for classification and priorization of major incidents" published by IAEA( International Atomic Energy Agency ). Above calculated damage area and incident probability were further adopted in this study to induce the individual and societal risk, quantitatively. The calculated data of the real Incident of the toxic material leakage showed reasonable agreements to the actual damage of the incidents, which showed a validity of this study. The result of this study might be a helpful measure for predicting damages and preparing safety systems for similar kinds of incidents.incidents.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.4
• /
• pp.187-194
• /
• 2017

ICAO Universal Safety Oversight Audit Programme is a comprehensive evaluation for aviation safety matters, including aircraft operation, licensing and aircraft incident/accident investigation. As this programme is measures aviation safety level of States, there is a need to meet international standards, especially in the field of aircraft incident/accident investigation. This research discusses points required to satisfy international standards, which are independence and autonomy of an accident investigation board, the lack of the enough number of investigators and efficient management of those personnel, the effective composition and use of an investigation report, an accident investigation itself to build big data and the creation of a cooperation system among States. This paper suggests various opinions in order to enhance aviation safety especially through aircraft accident investigations, using case studies from the US, UK and Japan.

• Journal of the Korean Home Economics Association
• /
• v.39 no.12
• /
• pp.141-158
• /
• 2001

The purpose of this study was identifying the essential concept of home of middle class and aged housewives by using a critical incident methodology. All 30 subjects participated in structured interviews designed to elicit statements describing the attributes of home and non-home environment. The qualities of comfort, place-attachment, self-expression, fundamental values and personal identity, social relationships, economic value, and a suitable physical structure were associated with home environments, and were absent in residences which were not regarded as homes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.944-945
• /
• 2016

Gamma-ray Detector for gamma-ray imaging device is composed of a shielding body for shielding gamma-rays incident from the radiation source. Distribution of the gamma ray can be represented by the distribution information on the direction in which the detecting section and the signal through the incident hole of collimator. The role of the shield is important because all signals should be treated as noise except for the signal from the incident hole.In this paper In this paper, we have produced a compact, lightweight and Collimator shield by changing the structure and physical properties with respect to the collimator and shielding of lead-based gamma-ray detectors. And we analyzed the shielding effectiveness relative to the incident gamma ray sphere measured signal value through the gamma irradiation test facility. The results confirmed that the production and Collimator shielding the imaging device Implementing more efficient to implement.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3344-3351
• /
• 2021

The Rare Isotope Science Project was launched in 2011 in Korea toward constructing the Rare isotope Accelerator complex for ON line experiments (RAON). RAON will house several experimental systems, including the Muon Spin Rotation/Relaxation/Resonance (μSR) facility in High Energy Experimental Building B. This facility will use 600-MeV protons with a maximum current of 660 pμA and beam power of 400 kW. The key μSR features will facilitate projects related to condensed-matter and nuclear physics. Typical experiments require a few million surface muons fully spin-polarized opposite to their momentum for application to small samples. Here, we describe the design of a muon transport beam line for delivering the requisite muon numbers and the electromagnetic-component specifications in the μSR facility. We determine the beam-line configuration via beam-optics calculations and the transmission efficiency via single-particle tracking simulations. The electromagnet properties, including fringe field effects, are applied for each component in the calculations. The designed surface-muon beamline is 17.3 m long, consisting of 2 solenoids, 2 dipoles affording 70° deflection, 9 quadrupoles, and a Wien filter to eliminate contaminant positrons. The average incident-muon flux and spin rotation angle are estimated as 5.2 × 10⁶ μ⁺/s and 45°, respectively.