• Journal of information and communication convergence engineering
• /
• v.13 no.3
• /
• pp.172-179
• /
• 2015

Face-to-face (F2F) bonding in three-dimensional integrated circuits (3D ICs), compared with other bonding styles, is closer to commercialization because of its benefits in terms of density, yield, and cost. However, despite the benefits that F2F bonding expect to provide, it's physical nature has not been studied thoroughly. In this study, we, for the first time, extract cross-die (inter-die) parasitic elements from F2F bonds on the full-chip scale and compare them with the intra-die elements. This allows us to demonstrate the significant impact of field sharing across dies in F2F bonding on full-chip noise and critical path delay values. The baseline method used is the die-by-die method, where the parasitic elements of individual dies are extracted separately and the cross-die parasitic elements are ignored. Compared with this inaccurate method, which was the only method available until now, our first-of-its-kind holistic method corrects the delay error by 25.48% and the noise error by 175%.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.43-51
• /
• 1991

This study was carried out to determine the withdrawal strength of various screws according to root diameter of screw and embeded length on the face and edge of domestic particleboard and medium density fiberboard. The obtained results were as follows: 1. The withdrawal strength of screw in domestic particleboard and medium density fiberboard was closely related to embeded length of the screw but less dependent on root diameter of the screw. 2. The withdrawal strength on the face and edge of domestic particleboard could be predicted by means of the following expression: $F_{Pf}=4.60{\times}D^{0.24}{\times}L^{1.14}(R^2=0.87)$ $F_{Pe}=0.54{\times}D^{0.43}{\times}L^{1.73}(R^2=0.84)$ Where: $F_{Pf}$ : withdrawal strength on the face of particleboard(kgf) $F_{Pe}$=withdrawal strength on the edge of particleboard(kgf) D=diameter of the screw(mm) L=embeded length(mm) 3. The withdrawal strength on the face and edge of domestic medium density fiberboard could he predicted by means of the following expression: $FM_f=1.53{\times}D^{0.53}{\times}L^{1.39}(R^2=0.93)$ $F_{Me}=1.14{\times}D^{0.66}{\times}L^{1.36}(R^2=0.87)$ where: $F_{Mf}$ = withdrawal strength on the face of medium density fiberboard(kgf) $F_{Mf}$=withdrawal strength on the edge of medium density fiberboard(kgf).

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1287-1292
• /
• 2005

This paper presents an effective pattern classification model by designing an artificial neural network based pattern classifiers for face recognition. First, a RGB image inputted from a frame grabber is converted into a HSV image which is similar to the human beings' vision system. Then, the coarse facial region is extracted using the hue(H) and saturation(S) components except intensity(V) component which is sensitive to the environmental illumination. Next, the fine facial region extraction process is performed by matching with the edge and gray based templates. To make a light-invariant and qualified facial image, histogram equalization and intensity compensation processing using illumination plane are performed. The finally extracted and enhanced facial images are used for training the pattern classification models. The proposed H-ART2 model which has the hierarchical ART2 layers and F-LVQ model which is optimized by fuzzy membership make it possible to classify facial patterns by optimizing relations of clusters and searching clustered reference patterns effectively. Experimental results show that the proposed face recognition system is as good as the SVM model which is famous for face recognition field in recognition rate and even better in classification speed. Moreover high recognition rate could be acquired by combining the proposed neural classification models.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.148-151
• /
• 2007

We made two injectors that were equal to all design except for existence or nonexistence of swirl chamber of fuel part, because we want to find cooling characteristics at the injector face according to existence or non existence of swirl chamber of fuel part. And we set regenerative cooling channel in injector face for protecting injector face for prolonged combustion time. Two injectors were performed hot firing test, and then we compared cooling characteristics of two injectors. Also we compared O/F ratio effects on cooling characteristics and combustion characteristics.

• The Journal of Korea Robotics Society
• /
• v.18 no.2
• /
• pp.164-171
• /
• 2023

To control the spread of COVID-19, it is important to identify the infection in its incipient stages so that the infected persons can be dealt with accordingly. The currently used face to face sampling method may increase the risk of infection for medical professionals as it exposes them to the asymptomatic yet infectious patients. This can result in further increases in the load on the medical system and workload of the medical staff. As a solution to this problem, in this paper, we present a robotic system for rapid non-face-to-face automatic nasopharyngeal swab sample collection. The system consists of a custom designed 7-DoF manipulator equipped with a specially developed safety mechanism for restricting the maximum force applied by the tip of the swab. During the swab sampling process, the force applied by the tip of the swab is continuously monitored in real-time by a 3-axis force sensor in order to detect contact with the nasopharynx. The possibility of using this system for automaticnasopharyngeal swab sample collection is proven through experimentation with a phantom model.

• Korean Journal of Cognitive Science
• /
• v.21 no.2
• /
• pp.359-386
• /
• 2010

In order to evaluate the domain-specific model and process-specific model of spatial and nonspatial working memory (WM), this study manipulated the memory load of the delayed response task and examined how the neural correlates of memory load effect was influenced by the stimulus domain (face and location) at the maintenance stage of WM using an event-related fMRI experiment. One or three face stimuli were presented as target stimuli and participants were asked to maintain the face itself (face WM) or the location of face stimuli (spatial WM). The results of recognition judgment accuracy showed no difference between face WM and spatial WM, and showed equivalent memory load effects of both WM. As a result of brian image analysis, memory load effect at maintenance stage showed that inferior, middle, and superior PFC were recruited by both face WM and spatial WM, and showed that VLPFC was the commonly activated area by both WM, supporting functional specialization of PFC by process components of WM. This study provides evidence for process-specific model in which maintenance of WM is associated with VLPFC.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.1
• /
• pp.47-51
• /
• 2016

It has made a special study of bending behavior of F.R.P. sandwich beams with bonded 2nd-reinforced plies. Specimen's faces were made of chopped mat 300-450, roving clothes 570, core is urethane foam, resin is 713bp unsaturated polyester for ship construction and the mixture weight ratio of resin versus fiber was 55:45 for bending analysis. The purpose of this paper is to study the exact bending behavior of bonded area's deflection and stiffness depends upon various bonded F.R.P. (2nd reinforced ply) length and thickness on which covered joints and to find the optimum design for the sandwich structures. All results and suggestions are based on experiment and using thick face calculation.

• Journal of the Korean Society of Costume
• /
• v.25
• /
• pp.233-247
• /
• 1995

The objectives of this study were to classify the contents of clothing involvement, to group elderly women into life style types. A method of this study was face to face re-search and questionnaire. Questionnaire was comprised of four sections : 18 Likert type items of clothing involvement measure ; 26 Likert type items of life style measure ; 3 items of clothing purchase measure ; and 3 demographic variables. Samples were 215 elderly women(60∼79 years of age) in Seoul, Korea. The data were analyzed using factor analy-sis, cluster analysis, one-way ANOVA, Dun-can's multiple range test,χ2 test. The results of the study were the follow-ings. 1. Four factors of clothing involvement derived by factor analysis : F.1 'clothing pleasure'; F.2 'clothing symbolism' ; F.3 'perceived risk in clothing purchase' ; F.4 'clothing interest'. 2. Four factors of life style derived by factor analysis : F.1 'active-leisure';F.2 'confidence oriented';F.3 'appearance interest';F.4 'house-work interest and community conciousness'. Three types of life style were defined by the cluster analysis of the 4 factors : T.1 'passive stag-nation'; T.3'outside activity'. 3. There were significant differences in clothing involvement factors according to life style types. Outside activity type perceived 'clothing pleasure' highest level among 3 life style types. Outside activity type and house-work and positive living type perceived 'cloth-ing symbolism' and 'clothing interest' higher level than did passive stagnation types. 4. Elderly women high in educational level were more distributed in outside activity type and the low in educational level in passive stagnation types. 5. There were significant relationships be-tween life style types and source of a clothing allowance, clothing purchase frequency, and a companion of dress store.

• Journal of Sensor Science and Technology
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2010

Electrostatic capacitance measurement method in a fine hose was proposed, in which two ring-type electrodes were disposed on the hose in the direction of fluid flow instead of the conventional face-to-face electrodes. With the proposed electrode structure, we realized a Ringer's solution exhaustion detector for an IV(invasive vein) injection set. On a 4 mm-diameter hose of IV set, we disposed two ring-type electrodes of 10 mm width at a distance of 5 mm each other and obtained 0.72 pF and 2.51 pF for air and 10 % dextrose Ringer's solution in the hose, respectively. The capacitance between the two electrodes varied with the hose-wraparound coverage of electrode as well as the width of electrode and the distance between the electrodes. For hose-wraparound electrode coverage of 75 %, the capacitance varied from 0.62 pF to 1.98 pF with the Ringer's solution level between the two electrodes. A charge amplifier converted the capacitance. variation into electric signal and a comparator was used to detect whether Ringer's solution was exhausted or not. The result was delivered to a host using a RF transmitter with 320 MHz carrier frequency.

• The Korean Journal of Rehabilitation Nursing
• /
• v.14 no.1
• /
• pp.24-31
• /
• 2011

Purpose: The purpose of this study was to identify related factors of stress, social support and rehabilitation motivation of stroke survivors and analyze their relationship. Method: A sample of 106 stroke survivors completed face-to-face interviews. The levels of stress, social support and rehabilitation motivation were measured by the Neuman's stress, Multidimentional Scale Perceived Social Support and Han's Rehabilitation Motivation, respectively. The t-test, ANOVA, and Pearson correlation were conducted using the SPSS 17.0. Results: The mean scores of stress, social support and rehabilitation motivation were 3.3 (SD=0.76), 3.2 (SD=0.88), and 3.4 (SD=0.49) respectively. Compared to stroke survivors who had no spouses, those with spouses had a lower level of stress (t=9.52, p=.003), a higher level of social support (t=7.32, p=.008) and a higher level of rehabilitation motivation (t=15.39, p=.001). The rehabilitation motivation was significantly higher in stroke survivors with higher education (F=5.00, p=.001), more monthly income (F=15.39, p=.001), greater income satisfaction (F=3.80, p=.026), shorter duration of disease (F=3.64, p=.030) and absence of dysarthria (t=6.81, p=.010). Stress, social support and rehabilitation motivation are significantly related with each other. Conclusion: The findings suggest that these significant factors should be considered when caring for stroke survivors.