• Geomechanics and Engineering
• /
• v.37 no.2
• /
• pp.179-187
• /
• 2024

In this paper, a unified time-dependent constitutive model of Darcy flow and non-Darcy flow is proposed. The influencing factors of flow velocity are discussed, which demonstrates that permeability coefficient is the most significant factor. Based on this, the dynamic evolution characteristics of water inrush during tunneling through fault fracture zone is analyzed under the constant permeability coefficient condition (CPCC). It indicates that the curves of flow velocity and hydrostatic pressure can be divided into typical three stages: approximate high-velocity zone inside the fault fracture zone, velocity-rising zone near the tunnel excavation face and attenuation-low velocity zone in the tunnel. Furthermore, given the variation of permeability coefficient of the fault fracture zone with depth and time, the dynamic evolution of water flow in the fault fracture zone under the variable permeability coefficient condition (VPCC) is also studied. The results show that the time-related factor (α) affects the dynamic evolution distribution of flow velocity with time, the depth-related factor (A) is the key factor to the dynamic evolution of hydrostatic pressure.

• Steel and Composite Structures
• /
• v.50 no.1
• /
• pp.63-75
• /
• 2024

In this paper, the modified couple stress theory (MCST) and first order shear deformation theory (FSDT) are employed to investigate the free vibration and bending analyses of a three-layered micro-shell sandwiched by piezoelectric layers subjected to an applied voltage and reinforced graphene nanoplatelets (GPLs) under external and internal pressure. The micro-shell is resting on an elastic foundation modeled as Pasternak model. The mixture's rule and Halpin-Tsai model are utilized to compute the effective mechanical properties. By applying Hamilton's principle, the motion equations and associated boundary conditions are derived. Static/ dynamic results are obtained using Navier's method. The results are validated with the previously published works. The numerical results are presented to study and discuss the influences of various parameters on the natural frequencies and deflection of the micro-shell, such as applied voltage, thickness of the piezoelectric layer to radius, length to radius ratio, volume fraction and various distribution pattern of the GPLs, thickness-to-length scale parameter, and foundation coefficients for the both external and internal pressure. The main novelty of this work is simultaneous effect of graphene nanoplatelets as reinforcement and piezoelectric layers on the bending and vibration characteristics of the sandwich micro shell.

• Journal of Distribution Science
• /
• v.22 no.10
• /
• pp.1-12
• /
• 2024

Purpose: Despite significant commitments between corporations and the government on green supply chain, green logistics and sustainable production, the adoption of green and sustainable trading innovation in Vietnam continues to face many obstacles. The objective of this study is to approach the decision to adopt green and sustainable trading innovation from the perspective of the enterprise. Research Design, Methodology and Approach: A cross-sectional study with the participation of 651 employees and managers at distribution enterprises such as logistics, supply, and delivery enterprises in southern Vietnam was conducted to assess business innovation decisions through innovation awareness. Partial least squares structural equation modelling (PLS-SEM) was proposed to evaluate the structural relationships of the model. Results: The research results show that the decision to innovate an enterprise is directly positively affected by the perception of marketing innovation, process innovation and organizational innovation; in which process innovation and organizational innovation are mediators for the perception of marketing innovation. Conclusions: This study makes a significant contribution by demonstrating the impact of marketing innovation awareness on the entire process that leads to enterprise innovation decisions to fulfil customer expectations and competitive pressure in the context of the green supply chain, green logistics and sustainable production.

• Nutrition Research and Practice
• /
• v.4 no.6
• /
• pp.522-527
• /
• 2010

Cardiovascular disease is a leading cause of death and disability and remains so in the future. The aim of this study was to detect the impact of a 6-month diet intervention on cardiovascular risk factors in postmenopausal Iranian women. It was a randomized controlled trial that carried out in the East Health Clinic in Ahvaz-Iran. This study started on June 2007 and was completed on May 2008. A total 64 healthy postmenopausal women recruited and randomly assigned to the intervention group (35) and control (29). Over the six months follow-up, the intervention group received five educational sessions (two face to face and three lecture discussion classes with slide demonstration) at the first month. These sessions were about menopause, cardiovascular disease and healthy diet. Every participant in the intervention group received one face to face education session at the $3^{rd}$ month, and also received a telephone call at the end of each month starting with the second month to remain on the diet. Pre-intervention and post-intervention anthropometric measurements, blood pressure, blood lipids and dietary intake were assessed. Data analyzed using the SPSS version 15. Descriptive (means and SD), univariate (paired-t test, Chi-Square and Independent T-test) and multivariate (GLM Repeated Measure) statistics were used. Participants in the diet group had significantly lower weight (-0.9 kg), body mass index (-0.4 $kg/m^2$), and fasting blood sugar (-4.5 mg/dl). The diet group significantly increased their daily intake of fiber (+2.3 g, P=0.05), decreased their intake of sodium (-28 mg, P=0.04), and consumption of fruit and vegetable ${\geq}$ 5 serving a day (80%, P=0.03) compared to the control group. Post menopausal women are at a greater risk for cardiovascular disease. Healthy diet using educational intervention can be an effective means of reducing cardiovascular risk in postmenopausal women.

• Particle and aerosol research
• /
• v.15 no.4
• /
• pp.191-202
• /
• 2019

In this study, performance (particle removal efficiency and breathing resistance) of several commercially available face masks (electrostatic filter masks (KF80 certified), a nanofiber filter mask (KF80 certified), and an uncertified mask) with their filter structure and composition were evaluated. Also, effects of relative humidity (RH) of incoming air, water and alcohol exposure, and reusability on performance of face masks were examined. Monodisperse and polydisperse sodium chloride particles were used as test aerosols. Except the uncertified mask filter, PM_2.5 removal efficiency was found to be higher than 90%, and the nanofiber filter mask had the highest quality factor due to the low pressure drop and high removal efficiency (nanofibers were arranged in a densely packed pore structure and contained a significant amount of fluorine in addition to carbon and oxygen). In the case of the KF80 certified mask, the removal efficiency was little affected when the RH of incoming air increased. When the mask filters were soaked in water, the removal efficiency of mask filters was degraded. In particular, the uncertified mask filter showed the highest removal efficiency degradation (26%). When the mask was soaked in alcohol, the removal efficiency also decreased with the greater degree than the water soaking case. The nanofiber mask filter showed the strongest resistance to alcohol exposure among tested mask filters. During evaluation of reusability of masks in real life, the removal efficiency of certified mask filter was less than 4% for 5 consecutive days (2 hours per day), while the removal efficiency of uncertified mask filter significantly decreased by 30% after 5 days.

• The Journal of Engineering Geology
• /
• v.11 no.1
• /
• pp.1-11
• /
• 2001

The geological characteristics of Korea are that we can encounter the rock layer only after 10m of excavation, methods to presume the rock pressure distribution of the rock layer is urgently needed. When using the existing empiric science of Terzaghi-Peck, Tschebotarioff to measure the rock pressure of the rock layer, underestimate the real strength because of the cohesion is ignored. Therefore calculating the horizontal sliding force of wedge block, which includes the dips and shear strength of discontinuities and surcharge load etc., think to be to getting a closer rock stress of the real rock pressure acting upon the earth structure in rock mass. This research use Coulomb soil pressure theory assuming that the backfill soil will yield wedge failure when it has cohesion, applying Prakash-Saran(l963), and then it uses equilibrium of force and shear strength $\tau$=c+$\sigma$tan $\Phi$ of the cliscontinuities. Analyzing shear strength and dips of cliscontinuities using calculated theory according to the status of discontinuities aperture, we were able to find out that because the cohesion and friction angle of the rock layer itself is large enough, how the dip directions and dips facing the excavation face is the only factor deciding whether or not the rock stress is applied. The evaluated theory of this research should be strictly estimated, so that the many parameters such as c, $\Phi$value, types and structures of rock class, excessive lateral pressure, dynamic load, earthquake, needed later when calculating shear strength of discontinuities and especially the ground water effect acting on rock layer should be coumpted with many measuring data achieve at the insite to study the application.

• Composites Research
• /
• v.36 no.5
• /
• pp.297-302
• /
• 2023

There are several methods for shaping foams, but the most commonly used methods involve the use of resin mixed with a foaming agent, which is then foamed under high temperature and pressure in the case of compression foaming, or foamed under high temperature without applying pressure in the case of atmospheric foaming. The polymers used for foaming require design and analysis of optimal foaming conditions in order to achieve foaming under ambient pressure. Environmentally friendly bio-based polymers face challenges when it comes to foaming on their own, which has led to ongoing research in blending them with resins capable of traditional foam production. This study investigates changes in the characteristics of bio-based polymer-EVA blend foams based on variations in the content of bio-based polymers and explores the optimal foaming conditions according to crosslinking. The correlation between foaming characteristics and mechanical properties of the foams was examined. Through this research, we gained insights into how the content of bio-based polymers affects the properties of foams containing bio-based polymers and identified differences between ambient pressure and high-pressure foaming processes. Additionally, the feasibility of commercializing bio-based polymer-EVA composite foams was confirmed.

• Archives of Craniofacial Surgery
• /
• v.14 no.2
• /
• pp.133-136
• /
• 2013

Retrobulbar hemorrhage is a rare but serious complication after blepharoplasty, mid-face injury, and treatment of facial bone fractures. The incidence of postoperative retrobulbar hemorrhage is 0.055% with an incidence of associated permanent blindness of 0.005%. A 69-year-old male came to the emergency room with pain on both orbital areas and uncontrolled bleeding after cosmetic lower blepharoplasty performed at a private clinic. He had not been evaluated preoperatively by the private clinic, but we found that he had undergone percutaneous transluminal coronary angioplasty and taken anticoagulants for 10 years. We performed an emergency operation to evacuate the hematoma. However, after surgery, he persistently complained of orbital pain, pressure and diminished visual acuity. Intraocular pressure was increased, and computed tomography demonstrated a retrobulbar hemorrhage with globe displacement. Emergent lateral canthotomy and cantholysis were performed. Intraocular pressure was decreased to 48/30 mm Hg immediately after the operation, falling within the normal range the next day. We recommend three points to minimize loss of vision by retrobulbar hematoma. Firstly, careful preoperative evaluation must be conducted including current medications, underlying diseases and previous history of surgeries. Secondly, cautious postoperative observation is important for the early diagnosis of retrobulbar hematoma. Lastly, immediate treatment is crucial to prevent permanent blindness.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.1
• /
• pp.61-74
• /
• 2016

This paper presents a case study on the ground settlement and volume loss estimation for slurry pressure balanced shield TBM tunnelling in weathered zone of granite rock. Settlement at each stage of shield tunnelling was analyzed and the volume losses and settlement trough factors were estimated from observations. In addition, using the existing volume loss evaluation method in literature, volume losses were estimated considering ground properties and actual driving parameters. Most of ground settlement occurred during passage of shield skin passage and after backfill grouting, and the measured total volume loss and trough curves appeared to coincide with literature. Shield and tail loss obtained from field measurement were found to be around 90% and 60% of the predictions, where tail loss indicated larger deviation than shield loss.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.156-162
• /
• 2013

The characteristics of the unsteady flowfield of a square prism having a detached splitter plate at the wake side were investigated by advanced vortex method. The instantaneous and average velocity field and pressure field around a square prism without and having splitter plate were calculated by forcing the gap ratio having the maximum drag reduction rate, at Reynolds number $Re=1.0{\times}10^4$ and the width ratio H/B=1.0 of splitter to the prism width. The drag and lift coefficients on the square prism were also obtained. The calculated results agree with the measured drag coefficients and pressure distributions on the square prism. The vortices of the opposite direction at upside and down side of the splitter plate were generated by installing of the plate. And the drag on the square prism was decreased by increasing of the pressure of back face of the prism with the vortices.