• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.23-26
• /
• 2003

3차원 Polygonal Mesh는 그래픽스, 에니메이션, 게임에서 3차원 객체에 대한 표현에 사용되고, 이러한 3차원 모델에 대한 IndexedFaceSet 노드에 3차원 정전정보와 연결정보를 압축하는데 MPEG-4 3DMC를 사용한다. 이러한 연결정보는 다각형의 Mesh 형태로 3차원 모델을 구성하는 정보를 갖는데, 이는 Tepological Surgery 라고 하는 방법을 통해서 2차원의 스트립 단위의 데이터로 분해된다. 이러한 3D 데이터는 방송환경과 같은 재전송이 불가능한 네트워크의 환경에서 유무선 네트워크 상에서 채널문제로 인해서 데이터의 손실이 있게 되면, 복호화 된 데이터는 데이터의 손상이 발생하게 된다. 이러한 현상은 3D 모델의 좌표의 연결정보에 손상을 주게 되고, 여기서 복호화 된 데이터는 스트립 단위로 손상이 발생하게 된다. 이러한 현상은 3차원 모델의 좌표의 연결정보에 손상을 주게 된다. 본 논문은 이러한 3차원 정보의 손상을 효과적으로 복원하기 위한 연구에 관한 것이며, Mesh의 면을 이루는 각 꼭지점의 좌표들의 연결 정보가 손실되지 않는 스트립에서는 약간의 차이는 있을 수 있으나, 완벽한 복원을 하였고, 두 개 이상의 스트립이 붙어서 손상된 경우나, 좌표의 연결 정보가 없는 경우에는 조건에 따라 현저히 좋은 격과를 얻을 수 있었다.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.187-196
• /
• 2006

In 3D animation most people adjust the moving motion of their characters on various terrains by using motion data acquired with the motion capture equipment. The motion data can be used to present real human motions naturally, but the data must be captured again to apply to the different terrains from those given at acquiring mode. In addition, there would be a difficulty when applying the data to other characters, in that case the motion data must be captured newly or the existing motion data must be heavily edited manually. In this paper we propose a unified method to generate human motions of walking and running for various terrains such as flat plane, inclined plane, stairway and irregular face. With these methods we are able to generate human motions controlled by the parameters : body height, moving speed, stride, etc. In the proposed methods, the positions and angles of joint can be calculated by using inverse kinematics, and we calculate the trajectory of the swing leg and pelvis according to the cubic spline. With these methods we were presented moving motions using a model of a human body.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.2
• /
• pp.1-13
• /
• 1996

Most of the ShipHandling Simulators of full-mission-bridge system need vast area to install and even PC-based maneuvering simulators are often equipped with Steering Wheel or Engine Telegraphe etc. of data input interface, which necessarily makes the user face with excessive financial burden. These have been one of the obstacles for the officers, captains, pilots and students in access to maneuvering simulation whenever they want to try it in advance prior to actual ship maneuvering. Subsequently, all the officers and captains come to have little chances to train themselves until they arualified as a pilot after a long period of time of realship maneuvering practice on board, which means they have to control they have to control their own ship at sea without clear understanding on her maneuverability when they are forced to do it on the way. And these lack of capability for maneuvering have used so often to result in marine casualties of collision with other ships or pier facilities while maneuvering in harbor. To prevent those accidents by means of enhancing their maneuvering ability, PC-based DeskTop Simulator that allows anyong to access readily at anytime is needed and in conformation to such demand this simulator has been developed. The Software this simulator written in Turbo Pascal Ver. 5.0 has adopted MMG mathmatical model theoretically in part and also it was designed to make it possible that all numeric data inputs and outputs with graphic presentation for maneuvering operation be carried out just only with keyboard and monitor console. With the Simulation software, all the officers, captains, pilots and even students who has a proper computer at hand are expected to be able to make an attempt to simulate the maneuvering of their ownship or any other types of them at any port in which they want to do it.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.3
• /
• pp.85-94
• /
• 1984

The WILDHABER-NOVIKOV gear, one of the circular arc gears, has the large contact area between the convex and concave profiled mating teeth, moves from one end of the tooth to the other axially making a face contact. Hence it provides a large load capacity than the Involute gear and still satisfying the law of gearing. In order to analyze the gear stress, a photoelastic investigation was carried out. Photo elastic model of the WILDHABER-NOVIKOV gears were made of Araldite CT200 in this investigation. For both the many teeth gear and the few teeth gear segments, External gears of all addendum type WILDHABER-NOVIKOV gear and the involute gear were tested. Included were the models with various profile raddi at the same pressure angle 20 .deg. and module 13.5. The flank stresses and fillet stresses of these gears were observed in each case and compared with those of gears. From this investigation, the following results were obtained. A. In the case of having many teeth gear: As the profile radius is increased, the fillet stresses of the WILDHABER-NOVIKOV gear become the same or less than that of the INVOLUTE gea, and the flank stress becomes smaller than that of the INVOLUTE gear. Therefore the better design condition is satisfied with a large profile radius. B. IN the case of having a few teeth gear: As the profile radius is increased the flank stress of WILDHABER-NOVIKOV gear becomes smaller than that of the INVOLUTE gear, but the fillet stresses become larger than that of the INVOLUTE gear. Therefore the larger design condition is satisfied with small profile radius.

• Journal of the Korean Society for Precision Engineering
• /
• v.4 no.3
• /
• pp.44-51
• /
• 1987

In metal cutting various types of chips are produced in consequence of cutting conditions. Flow-type chips have been studied in most cases because they are easier to be analyzed, but the actual surfaces of chips are not smooth, but crushed. This paper deals with saw-toothed chips, special types of flow-type chips, which have deep concaves and high convexes and sharp angles on the free surface. I tried to establish the theory of saw-toothed chip mechanism through experimental observation, that is, the mathmatical model of the cutting energy and cutting mechanism through the geometrical observation of the chips by using a microscope. The results obtained are as follows: 1. The mechanism of saw-toothed chips is diffenent from that of general flow-chips. 2. In the case of saw-toothed chips, the shear angle must be measured by the hypotenuse angle and the rake angle, and the shear angle is more affected by the rake angle than by the hypotenbuse angle. 3. The friction angle is represented by .beta. = . pi. /4+ .alpha./ sub n/- .phi. which is different from Merchant's equation. 4. The pitch and the slip are greatly influenced by depth of cut, but the influence of the rake angle on it is small. 5. The normal stress and the shear stress on the shear plane decrease with the increase of the cutting depth, and they are almost independent on the variation of a rake angle. 6. The unit friction energy on the tool face, the unit shear energy on the shear plane, and the total cutting energy per unit volume decrease with the increase of rake angle and cutting depth.

• Women's Health Nursing
• /
• v.17 no.5
• /
• pp.463-473
• /
• 2011

Purpose: Cervical cancer can be prevented by regular cervical screening. Embarrassment has been reported as one important barrier to cervical screening uptake. The absence of appropriate instrumentation, however, has limited our understanding of the links between embarrassment and health care outcomes. The purpose of this study was to evaluate psychometric attributes of the uterine cervical cancer screening embarrassment questionnaire. Methods: A convenience sample for field study was recruited from four gynecological clinics in Gyeongju, Korea. Within a cross-sectional descriptive design, 339 women who had cervical screening completed self-administered measures of embarrassment including a visual analogue, general medical embarrassment, dispositional embarrassment, and Pap smear related negative emotion. Results: Rasch analysis of items demonstrated the evidence of one-dimensional construct and good 7-point rating scales functioning. Factor analysis revealed that uterine cervical cancer screening embarrassment was comprised of two domains-bodily manifestations and perceiving an undesirable social face. Construct validity was demonstrated by a high subscale-to-subscale correlation. Convergent and discriminant validity was evidenced by significant correlations with a 100 mm VAS scale, general medical embarrassment, and Pap smear related negative emotion. Known-group validity was established by comparing women with high versus low trait embarrassment. Both two sub-scales and overall scale demonstrated good internal reliability. Conclusion: The Uterine uterine cervical cancer screening questionnaire is a reliable and valid instrument suited to assessing the manifestations of embarrassment during screening. The use of instrument can be extended to understand the client's embarrassment undergoing health examinations which require the exposure of their private parts.

• Steel and Composite Structures
• /
• v.36 no.1
• /
• pp.47-62
• /
• 2020

In this study, free vibration behavior of trapezoidal sandwich plates with porous core and two graphene platelets (GPLs) reinforced nanocomposite outer layers are presented. The distribution of pores and GPLs are supposed to be functionally graded (FG) along the thickness of core and nanocomposite layers, respectively. The effective Young's modulus of the GPL-reinforced (GPLR) nanocomposite layers is determined using the modified Halpin-Tsai micromechanics model, while the Poisson's ratio and density are computed by the rule of mixtures. The FSDT plate theory is utilized to establish governing partial differential equations and boundary conditions (B.C.s) for trapezoidal plate. The governing equations together with related B.C.s are discretized using a mapping- generalized differential quadrature (GDQ) method in the spatial domain. Then natural frequencies of the trapezoidal sandwich plates are obtained by GDQ method. Validity of current study is evaluated by comparing its numerical results with those available in the literature. A special attention is drawn to the role of GPLs weight fraction, GPLs patterns of two faces through the thickness, porosity coefficient and distribution of porosity on natural frequencies characteristics. New results show the importance of this permeates on vibrational characteristics of porous/GPLR nanocomposite plates. Finally, the influences of B.C.s and dimension as well as the plate geometry such as face to core thickness ratio on the vibration behaviors of the trapezoidal plates are discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3834-3857
• /
• 2021

The design of cluster-based routing protocols is necessary for Wireless Sensor Networks (WSN). But, due to the lack of features, the traditional methods face issues, especially on unbalanced energy consumption of routing protocol. This work focuses on enhancing the security and energy efficiency of the system by proposing Energy Efficient Based Secure Routing Protocol (EESRP) which integrates trust management, optimization algorithm and key management. Initially, the locations of the deployed nodes are calculated along with their trust values. Here, packet transfer is maintained securely by compiling a Digital Signature Algorithm (DSA) and Elliptic Curve Cryptography (ECC) approach. Finally, trust, key, location and energy parameters are incorporated in Particle Swarm Optimization (PSO) and meta-heuristic based Harmony Search (HS) method to find the secure shortest path. Our results show that the energy consumption of the proposed approach is 1.06mJ during the transmission mode, and 8.69 mJ during the receive mode which is lower than the existing approaches. The average throughput and the average PDR for the attacks are also high with 72 and 62.5 respectively. The significance of the research is its ability to improve the performance metrics of existing work by combining the advantages of different approaches. After simulating the model, the results have been validated with conventional methods with respect to the number of live nodes, energy efficiency, network lifetime, packet loss rate, scalability, and energy consumption of routing protocol.

• Journal of Veterinary Science
• /
• v.22 no.4
• /
• pp.48.1-48.15
• /
• 2021

Background: Porcine epidemic diarrhea virus (PEDV) is a swine enteropathogenic coronavirus that has devastated the swine industry in South Korea over the last 30 years. The lack of an effective method to control the endemics has led to a surge in PEDV recurrences in affected farms throughout the country. Objectives: In the first step toward establishing systematic monitoring of and active control measures over the swine populations, we constructed an assessment model that evaluates the status of (1) biosecurity, (2) herd immunity, and (3) virus circulation in each of the PEDV-infected farms. Methods: A total of 13 farrow-to-finish pig farms with a history of acute PEDV infection on Jeju Island were chosen for this study. The potential risk of the recurrence in these farms was estimated through on-site data collection and laboratory examination. Results: Overall, the data indicated that a considerable number of the PEDV-infected farms had lax biosecurity, achieved incomplete protective immunity in the sows despite multi-dose vaccination, and served as incubators of the circulating virus; thus, they face an increased risk of recurrent outbreaks. Intriguingly, our results suggest that after an outbreak, a farm requires proactive tasks, including reinforcing biosecurity, conducting serological and virus monitoring to check the sows' immunity and to identify the animals exposed to PEDV, and improving the vaccination scheme and disinfection practices if needed. Conclusions: The present study highlights the significance of coordinated PEDV management in infected farms to reduce the risk of recurrence and further contribute towards the national eradication of PEDV.

• Cross-Cultural Studies
• /
• v.45
• /
• pp.55-83
• /
• 2016

To provide a set of data with which instructors may boost the sagging demand for Anglo-American poetry classes, this thesis classifies the kinds of difficulties the students face in reading English poems. Asses to the classification is an analysis on the causes of the difficulties at different levels of the reading process, from the linguistic to the cultural. Arnoldian insight argues that poetry is the best of all forms of writing. Without an ample exposure to poetry, average English majors would barely sharpen the skills that they use to deal with other kinds of writing. To help ease the continuing need for a workable teaching model in English poetry reading classes, this thesis suggests focusing on the kinds of wrong translations produced by the students. According to the theory of cultural translation, any translation, even the wrong kind, is already a product of a very complicated process of interpretation that involves many cultural factors. With the analysis of these factors discovered in Korean college English reading classes, this thesis tries to explain the mechanisms through which wrong translations are produced, since these inevitably lead to wrong interpretations of given poetic texts.