• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.3
• /
• pp.301-306
• /
• 2008

Drivers are becoming more fatigued and uncomfortable with increase in traffic density, and this condition can lead to slower reaction time. Consequently, they may face the danger of traffic accidents due to their inability to cope with frequent gear shifting. To reduce this risk, some drivers prefer automatic transmission (AT) over manual transmission (MT). The AT offers more superior drivability and less shifting shock than the MT; therefore, the AT market share has been increasing. The AT is controlled by an electronic control unit (ECU), which provides better shifting performance. The transmission control unit (TCU) is a higher-value-added product, so the companies that have advanced technologies end to evade technology transfer. With more cars gradually using the ECU, the TCU is expected to be faster and more efficient for organic communication and arithmetic processing between the control systems than the l6-bit controller. In this paper, the model of an automatic transmission vehicle using MATLAB/Simulink is developed for the Hardware in-the-Loop (HIL) simulation with a 32-bit embedded system, and also the AT control logic for shifting is developed by using MATLAB/Simulink. The developed AT control logic, transformed automatically by real time workshop toolbox, is loaded to a 32-bit embedded system platform based on Freescale's MPC565. With both vehicle model and 32-bit embedded system platform, we make the HIL simulation system and HIL simulation of AT based on real time operating system (RTOS) is performed. According to the simulation results, the developed HIL simulator will be used for the performance test of embedded system for AT with low cost and effort.

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.500-509
• /
• 2009

Passive samplers have been used for many years for the sampling of organic vapors in work environment atmospheres. Currently, all passive samplers used in domestic occupational monitoring are foreign products. This study was performed to evaluate variable parameters for the development of passive organic samplers, which include the geometry of the device and diffusive length for the sampler design. Four prototype diffusive lengths; A-1(4.5 mm), A-2(7.0 mm), A-3(9.5 mm), A-4(12.0 mm) were tested for adsorption performances to a chemical mixture (benzene, toluene, trichloroethylene, and n-hexane) according to the US-OSHA's evaluation protocol. A dynamic vapor exposure chamber developed and verified by related research was used for this study. The results of study are as follows. The results in terms of sampling rate and recommended sampling time test indicate that the most suitable model was A-3 (9.5 mm diffusive lengths on both sides) for passive sampler design in time weighted average (TWA) assessment. Sampling rates of this A-3 model were 45.8, 41.5, 41.4, and 40.3 ml/min for benzene, toluene, trichloroethylene, and n-hexane, respectively. The A-3 models were tested on reverse diffusion and conditions of low humidity air (35% RH) and low concentrations (0.2 times of TLV). These conditions had no affect on the diffusion capacity of samplers. In conclusion, the most suitable design parameters of passive sampler are: 1) Geometry and structure - 25 mm diameter and 490 $mm^2$ cross sectional area of diffusion face with cylindrical form of two-sided opposite diffusion direction; 2) Diffusive length - 9.5 mm in both faces; 3) Amount of adsorbent - 300 mg of coconut shell charcoal; 4) Wind screen - using nylon net filters (11 ${\mu}m$ pore size).

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.5
• /
• pp.733-747
• /
• 2017

In the shallow tunnel, the surrounding ground could be loosened and deformed, which could be the cause of stress change in the ground. Terzaghi has clarified the development of a ground arching induced by the deformation of a tunnel crown in the trap door tests. However, he considered only the case in which that the tunnel crown deformed uniformly. He did not consider the effect of deformation shapes. Therefore, the relation between the shape of the ground relaxation above the tunnel crown and the deformation shape of the tunnel crown is not clear yet. In this study, model tests were performed for the three types of the tunnel crown, such as uniform, concave and convex shapes. As results, it was found that the vertical load would be transferred in various types depending on the deformation shapes of the tunnel crown.

• Journal of the Korea Society for Simulation
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2016

This study focuses on the air to air missile control fin planform optimization for the minimizing hinge moment with the considering phenomena of fluid and structure simultaneously. The fluid-structure interaction method is applied for the fluid and structure phenomena simulation of the control fins. A transient-loosely coupled method is used for the fluid-structure interaction simulation because it is suited for using each fluid and structure dedicated simulation software. Searching global optimization point is required many re-calculation therefore in this study, a mathematical model is applied for rapidly calculation. The face centered central composite method is used for generating design points and the 2nd polynomial response surface is sued for generating mathematical model. Global optimization is performed by using the generic algorithm. An objective function is the minimizing travel distance of the center of pressure between Mach 0.7 and 2.0 condition. Finally, the objective function of optimized planform is reduced 7.5% than the baseline planform with satisfying constrained conditions.

• Journal of Korea Multimedia Society
• /
• v.12 no.8
• /
• pp.1089-1098
• /
• 2009

Recently, many researches of making more comfortable input device based on gaze detection technology have been performed in human computer interface. Previous researches were performed on the computer environment with a large sized monitor. With recent increase of using mobile device, the necessities of interfacing by gaze detection on mobile environment were also increased. In this paper, we research about the gaze detection method by using UMPC (Ultra-Mobile PC) and an embedded camera of UMPC based on face and facial feature detection by AAM (Active Appearance Model). This paper has following three originalities. First, different from previous research, we propose a method for tracking user's gaze position in mobile device which has a small sized screen. Second, in order to detect facial feature points, we use AAM. Third, gaze detection accuracy is not degraded according to Z distance based on the normalization of input features by using the features which are obtained in an initial user calibration stage. Experimental results showed that gaze detection error was 1.77 degrees and it was reduced by mouse dragging based on the additional facial movement.

• Archives of Craniofacial Surgery
• /
• v.12 no.2
• /
• pp.86-92
• /
• 2011

Purpose: The purpose of this study was to investigate the possibility that a dynamic facial composite flap with sensory and motor nerves could be made available from donor facial composite tissue. Methods: The faces of 3 human cadavers were dissected. The authors studied the donor faces to assess which facial composite model would be most practicable. A "panorama facial flap" was excised from each facial skeleton with circumferential incision of the oral mucosa, lower conjunctiva and endonasal mucosa. In addition, the authors measured the available length of the arterial and venous pedicles, and the sensory nerves. In the recipient, the authors evaluated the time required to anastomose the vessels and nerve coaptations, anchor stitches for donor flaps, and skin stitches for closure. Results: In the panorama facial flap, the available anastomosing vessels were the facial artery and vein. The sensory nerves that required anastomoses were the infraorbital nerve and inferior alveolar nerve. The motor nerve requiring anstomoses was the facial nerve. The vascular pedicle of the panorama facial flap is the facial artery and vein. The longest length was 78 mm and 48 mm respectively. Sensation of the donor facial composite is supplied by the infraorbital nerve and inferior alveolar nerve. Motion of the facial composite is supplied by the facial nerve. Some branches of the facial nerve can be anastomosed, if necessary. Conclusion: The most practical facial composite flap would be a mid and lower face flap, and we proposed a panorama facial flap that is designed to incorporate the mid and lower facial skin with and the unique tissue of the lip. The panorama facial composite flap could be considered as one of the practicable basic models for facial allotransplantation.

• Cross-Cultural Studies
• /
• v.29
• /
• pp.177-199
• /
• 2012

Nowadays migrations between the countries are getting each day more active and a mixture of people with different cultural backgrounds strengthens the hybridism, whereupon the point of view on the migration of Koreans has been changed from a diasporan perspective to an transnational one. The expansion of the transnationalism affects the identity of the subsequent generations of the immigration giving way to a psychologically deterritorialized social identity, which is an important consideration in the study of subsequent generations of the immigration. This study examined the Korean immigration history and the current status of the Korean community in Spain since the 1960s. The early immigrants like fishing vessel crew members, instructors of Taekwondo, chicken sexers who, despite the limits of foreigners in Spain, went to find out the source of life with no hesitation, overcame the difficulties of the early settlers and finally managed to achieve local success. Current history of immigration that began in the mid-1960s went through the maturity during the 1970s and 80s and the Koreans in Spain these days, who have undergone differentiation in the occupational structure because of the crisis of pelagic fisheries, face new challenges due to changes in the environment of the country they reside. The Korean community is regarded as an 'exemplary minority group (Model Minority)' even though it is a minority group in number. Now that the interest for overseas Koreans is higher than ever at home and abroad, due to the economic growth of the Republic of Korea, the spread of its cultural influence -the Korean Wave as proof-, and the overseas Koreans suffrage conducted, the research of the Korean residents in Spain will be important as an advanced research of an unexplored field, as well as an opportunity to broaden the horizons of the existing study area that has mainly dealt with major regions only.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.1
• /
• pp.64-73
• /
• 2019

The manufacturing companies under Make-To-Order (MTO) production environment face highly variable requirements of the customers. It makes them difficult to establish preemptive production strategy through inventory management and demand forecasting. Therefore, the ability to establish an optimal production schedule that incorporates the various requirements of the customers is emphasized as the key success factor. In this study, we suggest a process of designing the simulation model for establishing production schedule and apply this model to the case of a flat glass processing company. The flat glass manufacturing industry is under MTO production environment. Academic research of flat glass industry is focused on minimizing the waste in the cutting process. In addition, in the practical view, the flat glass manufacturing companies tend to establish the production schedule based on the intuition of production manager and it results in failure of meeting the due date. Based on these findings, the case study aims to present the process of drawing up a production schedule through simulation modeling. The actual data of Korean flat glass processing company were used to make a monthly production schedule. To do this, five scenarios based on dispatching rules are considered and each scenario is evaluated by three key performance indicators for delivery compliance. We used B2MML (Business To Manufacturing Markup Language) schema for integrating manufacturing systems and simulations are carried out by using SIMIO simulation software. The results provide the basis for determining a suitable production schedule from the production manager's perspective.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.285-292
• /
• 2019

With the popularization of PC, SNS and IoT, a lot of data is generated and the amount is increasing exponentially. Artificial neural network learning is a topic that attracts attention in many fields in recent years by using huge amounts of data. Artificial neural network learning has shown tremendous potential in speech recognition and image recognition, and is widely applied to a variety of complex areas such as medical diagnosis, artificial intelligence games, and face recognition. The results of artificial neural networks are accurate enough to surpass real human beings. Despite these many advantages, privacy problems still exist in artificial neural network learning. Learning data for artificial neural network learning includes various information including personal sensitive information, so that privacy can be exposed due to malicious attackers. There is a privacy risk that occurs when an attacker interferes with learning and degrades learning or attacks a model that has completed learning. In this paper, we analyze the attack method of the recently proposed neural network model and its privacy protection method.

• Journal of International Area Studies (JIAS)
• /
• v.22 no.3
• /
• pp.55-74
• /
• 2018

With the advent of multicultural society, many countries have come to the point of considering a fundamental revision or review of their previously established national identity and social constitution principles. This situation often generates conflicts and controversies between advocates of tradition and promotors of multiculturalism. In this article we will look at the case of France and Brazil and discuss how these two countries maintain, discard or fundamentally modify their traditional social integration model in the face of the multicultural challenges(racism, racial discrimination and integration/coexistence of immigrants of different cultural backgrounds), and examine the controversial aspects surrounding it. In particular, focusing our eyes on racial/ethnic statistics debates in both countries, we will try to compare the cases between that of adoption of multicultural alternative model(Brazil) and the case of rejection/retention(France) to find out some political meanings imbedded in those cases.