• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.51-57
• /
• 2004

A simple fiber length measurement technique has been demonstrated by using a self-seeding laser oscillation of a Fabry-Perot laser diode. We induced a self-seeding laser oscillation through a closed-loop by adjusting the modulation frequency of a Fabry-Peort laser diode when the output optical pulse of the laser reinjected into the laser after passing through the closed-loop. The length of a fiber-under-test was calculated from the difference between my two modulation frequencies at which self-seeding laser oscillation occurs at a specific mode. We have experimentally confirmed the technique for various fiber lengths from 0.1 km to 75 km. The relative error between the measurement result of the proposed technique and that of a commercial instrument was less than 0.24 %. The repeatability of the proposed technique was better than 0.1 %.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.106-112
• /
• 1994

The injection-locking of the broad-area diode laser was analysed by using the Fabry-Perot model. The far-field pattern of the output beam was able to be treated by superposing the individual beams emitted from the front facet due to the multiple reflections between the front and rear facets. and the exact near and far field patterns were obtained. The angle-steering effect according to change of the incident frequency was changed was calculated and found to be 0.022 degree/GHz with a bandwidth of 120 GHz.20 GHz.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.9-14
• /
• 2005

Mode missing of Fabry-Perot laser diodes has been modeled using the time domain laser model(TDLM). Fabry-Perot laser diodes that have structure of ripple in the waveguide of active layer or defects inside the active layer were simulated. For accurate simulation, the nonlinear effects were included such as spatial hole burning(SHB) and gain saturation. From the simulation results, it was founded that the defect inside the active layer in laser diodes has a strong influence on mode missing rather than the waveguide ripple. The simulation results are confirmed with the fabricated Fabry-Perot laser diodes by measuring the longitudinal mode spectra as a function of temperature from $25[^{\circ}C]\;to\;85[^{\circ}C]$.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.698-703
• /
• 2016

We report a new all-optical flip-flop (AOFF) with a quite simple structure, using optical beating in an injection-locked Fabry-Perot laser diode (FP-LD) with optical bistability. While conventional AOFF methods using an injection-locked FP-LD require additional devices such as secondary FP-LDs or polarization controllers for reset operation, the proposed method can be implemented using only a single commercially available FP-LD with set and reset signals. The optical beating induces intensity fluctuations inside the FP-LD, and releases the locking state to the reset state. Even though we demonstrated the AOFF at 100 Mbit/s, we expect that its operation rate could extend to 10 Gbit/s, according to the limit of the FP-LD's frequency response.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.359-363
• /
• 2008

A novel WDM-PON system delivering bidirectional 1.25-Gbps data and broadcasting data is proposed. A subcarrier signal modulates optical carriers of a Fabry-Perot-laser-diode based broadband light source to broadcast to all users. Reflective semiconductor optical amplifiers are used as modulators for the baseband data at both the optical line terminal and the remote optical network unit for a channel. Bit error rate and error vector magnitude were measured to demonstrate the proposed scheme.

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.227-231
• /
• 2011

An external optical modulation using absorption s in a Fabry-Perot laser diode (FP-LD), has been proposed and experimentally demonstrated for multicasting in a WDM-PON. The center wavelengths of absorption s in an FP-LD move to short-wavelength rapidly by only a small current (~1 mA) injection. If the current injection is stopped, the s move back to the original position. Such a movement of the s can make the FP-LD act as an external optical modulator, which is found to modulate at a maximum modulation speed of 800 Mbps or more. For a multicasting transmitter in a WDM-PON, the proposed modulator can be cost-effectively applied to a multi-wavelength laser source with the same periodicity of the longitudinal mode. Instead of the multi-wavelength laser source, tunable-LDs are used for experiments. The 32 channel multicasting system with the proposed modulator has been demonstrated, showing power penalties of 1.53~4.15 dB at a bit error rate of $10^{-9}$ with extinction ratios better than 14.5 dB at 622 Mbps.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.309-312
• /
• 2008

We study signal characteristics of the injection-locked Fabry-Perot laser diodes(FP-LDs) for the development of a costeffective WDM-PON solution. The output power and system performance of WDM-PON using injection locked FP-LD are depend on optical characteristics of injection source. The effect of optical power and polarization state of the injection source experimentally investigated. We also measured BER characteristics of the directly modulated FPLD and its power penalty at the BER of $10^{-9}$.

• Korean Journal of Optics and Photonics
• /
• v.23 no.1
• /
• pp.42-51
• /
• 2012

In this paper, injection-locking characteristics versus active layer structures in Fabry-Perot laser diodes (FP-LD) are compared. TE and TM gain spectra and peak gains versus carrier density in polarized and unpolarized multiple quantum well structures and in an unpolarized bulk structure are calculated. The calculated gain parameters are applied to a time-domain large-signal model to simulate the injection-locking characteristics. The results show that RIN in unpolarized FD-LDs is about 3 dB lower than that in a polarized FP-LD and that the eye characteristics of the unpolarized FP-LD are much better than those of the polarized FP-LD.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.4
• /
• pp.162-169
• /
• 2020

In this paper, we attempted a qualitative understanding of mutual injection locking without rigorous mathematics, and analyzed the proposed mutual injection locked light source. Also, a low-cost WDM-PON light source based on mutual injection locking using two unpolarized Fabry-Perot Laser Diodes (F-P LDs), was implemented. The RIN (Relative Intensity Noise) characteristic for the wavelength change of the F-P LD was measured, and when the variable wavelength range was 2.07 nm, it showed a RIN of at least -110 dB/Hz.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.166-167
• /
• 2001

과장 변환기는 WDM (wavelength division multiplexing) 시스템에서 wavelength relocation을 가능하게 하여 시스템의 유연성과 효율성을 향상시킨다는 측면에서 매우 중요한 기능을 갖는다. WDM 시스템의 채널의 수가 점차 증가함에 따라 채널의 간격이 100 GHz에 이르고 있으며 향후 더욱 조밀해 질것이다. 이러한 DWDM (Dense WDM)시스템에서 사용될 수 있는 파장변환기는 100 GHz단위의 파장변환 기능과 광대역 가변 변위가 필수적이다. (중략)