• 제목/요약/키워드: Fabry-Perot laser

검색결과 106건 처리시간 0.029초

Self-seeding FP-LD을 이용한 파장 가변 레이저 광원 (Tunable laser source using a self-seeding FP-LD)

  • 김정민;이혁재
    • 융합신호처리학회논문지
    • /
    • 제22권3호
    • /
    • pp.104-109
    • /
    • 2021
  • 본 논문에서는 self-seeding FP-LD (Fabry Perot Laser Diode)를 이용하여 WDM-PON (Wavelength Division Multiplexing - Passive Optical Network)에서 사용될 수 있는 새로운 파장 가변 광원의 가능성을 검증한다. 파장 가변 광원을 이용한 WDM-PON의 기존 구현은 AWG (Arrayed Waveguide Grating) 소자의 중심 파장과 광원의 중심 파장을 세밀히 정렬해 주어야 하는 단점이 발생한다. 그러나, 본 논문에서 제안하는 파장 가변 광원은 매우 간단한 구조로 구성되며, 가변 파장이 AWG의 중심 파장에 자동 정렬되는 장점을 갖는다. 구현된 파장 가변 광원은 약 14 nm 정도 이상의 파장 가변 대역을 보였고, 상대적 세기 잡음, RIN (Relative Intensity Noise)은 최대 약 -124dB/Hz로 나타났으며, 외부 변조기를 통해 변조한 결과 10Gb/s 신호에 대한 변조 가능성을 확인 할 수 있었다.

Effects of the Injected ASE Bandwidth on the Performance of Wavelength-locked Fabry-Perot Laser Diodes

  • Park Kun-Youl;Baik Jin-Serk;Lee Chang-Hee
    • Journal of the Optical Society of Korea
    • /
    • 제9권2호
    • /
    • pp.45-48
    • /
    • 2005
  • We investigate effects of the injected ASE (Amplified spontaneous emission) bandwidth on the performance of the wavelength-locked Fabry-Perot laser diodes (F-P LDs) under constant injection power density and constant injection power. For the constant injection power density, we can determine the minimum injection bandwidth by the required intensity noise or the bit-error rate (BER) performance. On the other hand, there exists the optimal ASE bandwidth for the constant injection power to minimize the intensity noise.

1.25 Gb/s Broadcast Signal Transmission in WDM-PON Based on Mutually Injected Fabry-Perot Laser Diodes

  • Yoo, Sang-Hwa;Mun, Sil-Gu;Kim, Joon-Young;Lee, Chang-Hee
    • Journal of the Optical Society of Korea
    • /
    • 제16권2호
    • /
    • pp.101-106
    • /
    • 2012
  • We demonstrate a cost effective broadcast signal transmission at 1.25-Gb/s with 100 GHz channel spacing based on a broadband light source (BLS) for a wavelength division multiplexing-passive optical network (WDM-PON). The BLS is implemented by using mutually injected Fabry-Perot laser diodes (MI F-P LDs). The error-free transmission without a forward error correction (FEC) is achieved by its low relative intensity noise (RIN). The number of usable modes is determined by RIN and/or extinction ratio (ER) in the spectrum sliced light output.

Generation of 1.5 Gbps Pseudo-random Binary Sequence Optical Signals by Using a Gain Switched Fabry-Perot Semiconductor Laser

  • Kim Dae-Geun;Woo Sae-Yoon;Kim Dong-Kwan;Hwang Taek-Yong;Park Seung-Han;Kim Dug Young
    • Journal of the Optical Society of Korea
    • /
    • 제9권3호
    • /
    • pp.103-106
    • /
    • 2005
  • Recently, polymethyl methacrylate based plastic optical fibers (POFs) have attracted considerable attention as a potential medium for local area network (LAN) and home network applications. Since the POFs have very low optical loss at around 650mm, in particular, it becomes quite important to develop GHz transmitters operating at this wavelength for high bit rate optical transmission applications of the POFs. In this paper, we present generation of ${\geq}1.5 Gbps$ pseudo-random binary sequence optical signals by using a gain switched InGaA1P Fabry-Perot semiconductor laser with a high frequency filter, operating at 650mm, and the application of these signals to bandwidth measurement of POFs.

Nd 첨가 광섬유 레이저 제작 및 발진특성 (Fabrication and Lasing Characteristics of Nd Doped Fiber Laser)

  • 이상배;조재철;김선호;김상국;최상삼;김병윤;김영덕
    • 한국광학회지
    • /
    • 제1권2호
    • /
    • pp.178-184
    • /
    • 1990
  • MCVD법과 액체 첨가법으로 실리카 광섬유 코아에 Nd를 첨가하여 능동 광섬유 소자를 제조하였다. 514.5nm Ar 레이저를 여기광원으로 하고, dichroic 레이저 거울로 Fabry-Perot 공진기를 구성하여 발진시킨 결과, 중심파장 $1.096\mu\textrm{m}$에서 발진서폭 15nm로 발진하는 광섬유 레이저를 구현할 수 있었다. 여기광원의 세기에 따라 발진특성을 조사하였고, 레이저 출력거울의 반사율을 다양하게 조절하여 실험한 결과 출력거울 반사율이 67.5%일 때 slope 효율 1.28%, 최대 발진출력 1.88mW를 얻었다.

  • PDF

External Optical Modulator Using a Low - cost Fabry - Perot Laser Diode for Optical Access Networks

  • Lee, Hyuek-Jae;Won, Yong-Hyub
    • Journal of the Optical Society of Korea
    • /
    • 제8권4호
    • /
    • pp.163-167
    • /
    • 2004
  • We propose and demonstrate an external optical modulation method based on TE/TM-mode absorption nulls in a Multiple Quantum Well(MQW) Fabry-Perot laser diode(FP-LD). The center wavelength of the absorption nulls is rapidly shifted to short-wavelength by the small current change(~1mA) in the FP-LD, which can modulate an optical signal with more than 10 dB of extinction ratio(ER). The shift of the center wavelength comes from the refractive index change due to anomalous dispersion and the plasma effect in MQW FP-LD waveguide. Non-inverting and inverting signals are made by TE- and TM-mode absorption nulls at 155.52 Mbps and BERs for the signals are measured.

패브리-페로 간섭계를 이용한 연속발진 레이저의 선폭과 거울의 반사율 측정방법 (A Simple Method of Measurement for the CW Laser Bandwidths and Mirror Reflectivities using a Fabry-Perot Interferometer)

  • 김재완;한재원;유용심;공홍진;이해웅
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1997년도 Advance Program of 14th optics andquantum Electronics conference, 1997제14 회 광학 및 양자전자 학술 발표회 논문 요약집
    • /
    • pp.75-75
    • /
    • 1997
  • PDF

아세칠렌가스($^13C_2H_2$)분자의 흡수선을 이용한 기준 광신호 및 광섬유 파브리-페로 필터에 의한 등간격 다중채널의 안정화 (Equi-spaced multichannel stabilization with a reference frequency from ($^13C_2H_2$) molecules and optical fiber fabry-perot filter)

  • 이현재;류갑열;이동호;박창수
    • 한국광학회지
    • /
    • 제8권1호
    • /
    • pp.68-72
    • /
    • 1997
  • $^{13}$C$_{2}$H$_{2}$ 분자의 빛살 흡수선 중 분산천이 광섬유의 영분산 파장에 가까운 1549.49 nm 파장의 흡수선에 DFB-LD (distributed feedback laser diode)의 주파수를 안정화시켰다. 이 주파수 안정화된 DFB-LD와 광섬유 파브리-페로 필터의 투과 및 반사특성을 이용하여 광섬유 파브리-페로 필터의 중심주파수를 안정화시켰다. 자유분광너비(free spectral range)가 100 GHz인 안정화된 광섬유 파브리-페로 필터의 공진 조건에 파장이 다른 3개의 DFB-LD 빛살을 투과시켜 DFB-LD들을 안정화시킴으로써 주파수분할 다중을 하였다. 또한 레이저를 디더링(dithering) 방법으로 안정화시켰을 때 디더링 전류에 따른 레이저의 선폭변화는 600 MHz/mA였다.

  • PDF

시간지연 샘플링을 이용한 광섬유 격자 센서어레이의 선형 복조 (Linear interrogation of fiber Bragg grating sensor array using time-delayed quadrature sampling technique)

  • 김종섭;송민호
    • 한국광학회지
    • /
    • 제15권1호
    • /
    • pp.34-38
    • /
    • 2004
  • 파장가변형 광섬유레이저로 광섬유격자 센서어레이를 복조하는 방법을 제안하였다. 레이저의 출력파장을 시간지연 샘플링으로 분석하고 이를 이용하여 기존 시스템의 비선형적 동작특성을 개선하였다. 계산된 파장값은 센서어레이 출력파평의 각 피크에 할당되어 파장가변필터의 비선형성에 영향받지 않고 가해진 물리량에 대하여 항상 선형적인 출력을 얻게 하였다. 실험을 통하여 약 20 pm의 분해능을 얻었으며 이는 고속의 위상변조를 사용할 경우 크게 개선될 수 있음을 보였다.