• Smart Structures and Systems
• /
• v.7 no.4
• /
• pp.275-287
• /
• 2011

The behaviors of saturated soils such as compressibility and permeability are distinguished by preconsolidation stress. Preconsolidation stress becomes an important design parameter in geotechnical structures. The goal of this study is to introduce a new method for the evaluation of preconsolidation stress based on the shear wave velocity at small strain, using Busan, Incheon, and Gwangyang clays in Korea. Standard consolidation tests are conducted by using an oedometer cell equipped with bender elements. The preconsolidation stresses estimated by shear wave velocity are compared with those evaluated by the Casagrande, constrained modulus, work, and logarithmic methods. The preconsolidation stresses estimated by the shear wave velocity produce very similar values to those evaluated by the Onitsuka method (one of the logarithmic methods), which yields an almost real preconsolidation stress. This study shows that the shear wave velocity method provides a reliable method for evaluating preconsolidation stress and can be used as a complementary method.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.5
• /
• pp.36-48
• /
• 2008

This study examines the influence of control algorithms on dimming performance to determine appropriate control setting when direct/indirect lighting is controlled by a daylight dimming system. Computer simulation were performed for a small office with double skin envelope under various daylight conditions. A retractable fabric shading and Venetian blind were applied for internal and external envelopes under three CIE standard sky conditions. Unshielded and partially-shielded photosensors were used, and three control algorithms were applied for the sensors. In general, dimming level was too excessive due to the direct impact of light from lighting fixture to the photosensor. Providing insufficient lighting output, the unshielded photosensor completely failed to secure required illuminance under any daylight condition. When a partially-shielded photosensor was applied under clear sky, three setting points functioned effectively. Less sensitivity for the partially-shielded photosensor was effective to control the dimming system optimally with reasonable energy saving. However, the daylight dimming control system for direct/indirect lighting does not appear to be energy effective when photosensors without enough shielded area is installed on ceiling where light from fixtures reaches directly.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.88-97
• /
• 2019

In this study, when printed on a nylon material, the color strength and fastness are lower than that of a polyester material, and the nylon material shrinks due to heat and pressure, resulting in poor design and poor compatibility. To overcome this problem, we investigated the possibility of transfer DTP by adding pre-treatment process to nylon transfer DTP process. For the basic study of pre-treatment preparation, we used pure nylon material which is not compounded and dispersion ink and transfer paper applied to existing PET transfer DTP. Pre-treatment preparations were classified into three types of acryl-base polymer and pre-treated with nylon and then applied to transfer DTP to confirm their color strength and fastness. The color strength of the pre-treated nylon material increased and poly-methyl-acrylate amulsion pre-treatment showed the best color at $210^{\circ}C$, 1.5m/min and 0.3MPa. The nylon material pre-treated with washing, friction, and light fastness was judged to be more excellent and stable.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.75-87
• /
• 2019

The purpose of the study was to suggest a cycle wear top jersey improved in mobility. The study developed a new cycle wear with improvement in dissatisfaction factors by planning design, pattern and the functionality of fabric. Considering the amount of sweat and the necessities of compression part, the basic material, the additional compression material, and the mesh material were arranged differently according to areas. The assessment of the developed cycle wear was composed of wearing comfort evaluation by female cyclist, photo analysis and garment pressure evaluation. The developed cycle wear was evaluated and compared with the current cycle wear. As a result of wearing comfort evaluation, the developed cycle wear was evaluated as better than the existing ones in all part, particularly in the areas of reflection tape and materials, partial pressure, pocket size, and prevention of loss. Photo analysis was in agreement with the appearance evaluation of the participants. As a result of garment pressure evaluation, the front neck part was more comfortable and the upper arm, abdomen, and waist area showed higher pressure, so it partially supported the body. This study has significant meaning for developing a new cycle wear top, protecting the body and improving the exercise effect.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.5
• /
• pp.107-116
• /
• 2019

Non-geometric shapes in contemporary architecture was explained from the transcendental schema of Deleuze with his abstraction theory. In this explanation, the intensity, the movement and change and the sublime were suggested as the expressional elements of the transcendental abstraction related with the artistic sensation of architecture. First, the intensity as a power of sensation which acts to the body before the recognition of brain is mainly expressed with the movement of curved lines of architectural space. Second, the movement of change is expressed as the de-centralized and de-formalized nomadic curve as the line in architectural 'smooth space' which has unrestrained orientations. Third, the sublime is expressed in the hugeness, enormousness or sometimes uncanny in void space, which could be contradictively mixed with senses of displeasure and pleasure. The sublime feelings in architecture can be emerging by rationally overcoming the unpleasant senses of contradictive spaces in architecture or urban fabric. This study has explained those expressional elements with the architectural works of Steven Holl, Frank Gehry and Zaha Hadid.

• Science of Emotion and Sensibility
• /
• v.25 no.2
• /
• pp.55-70
• /
• 2022

In the 21^st century, the demand for eco-friendly leather, such as eco-leather and vegan leather, is steadily increasing. This study examines the influence of eco-friendliness on consumers' purchasing intentions and the possibility of eco-friendly changes in the fashion accessory market, which is dominated by leather material and leather substitutes. This study administered a questionnaire survey to 227 males and females between 20 and 60 years of age in Korea. With a 5-point Likert scale, data were collected on evaluation criteria when purchasing shoes and bags and purchasing intention of various leather substitute materials according to the democratic variables. The eco-friendliness attitude was divided into eco-consciousness and green behavior. As the eco-friendly attitude increased, most purchasing standards increased, but the purchasing criteria, such as trends, brands, and prices, did not correlate with the eco-friendly attitude. The eco-consciousness of a consumer had a high correlation with the design evaluation criteria, while the green behavior of the consumer aligned with durability and comfort criteria when purchasing a bag. There was a preference for recycled leather, vegetable leather, synthetic leather, and chemical leather, and the fabric type was ranked as natural fiber, biodegradable fiber, and synthetic fiber. Consumers with both green behavior and eco-consciousness are more likely to purchase biodegradable textiles and vegetable leather for the material of shoes and bags.

• Journal of Information Processing Systems
• /
• v.19 no.1
• /
• pp.89-97
• /
• 2023

With the growth of Internet-of-Things (IoT) technologies, the number of IoT devices developers need to manage has increased exponentially. Many IoT standards have been proposed to allow those devices to communicate efficiently in day-to-day tasks. However, we lack trusted interworking entities for devices from different standards to collaborate securely. This paper proposes a blockchain platform that bridges multiple heterogeneous IoT platforms to co-exist and interwork. Specifically, we designed an interworking proxy application entity (IPE) implemented as a chaincode in Hyperledger Fabric to collect and process data coming from/to oneM2M and LWM2M architecture. The use of blockchain will guarantee network reliability and data integrity so that cross-standard communications can be audited and processed securely. Based on our evaluation, we show that the interworking between oneM2M and LWM2M through our blockchain platform is feasible. Furthermore, the proposed system can process up to 206 transactions per second with 1,000 running applications, which is about an 87% increase from the previously referenced study.

• Geomechanics and Engineering
• /
• v.31 no.3
• /
• pp.291-304
• /
• 2022

Maximum shear modulus (G_max or G₀) is an important soil property useful for many engineering applications, such as the analysis of soil-structure interactions, soil stability, liquefaction evaluation, ground deformation and performance of seismic design. In the current study, bender element (BE) tests are used to evaluate the effect of the void ratio, effective confining pressure, grading characteristics (D₅₀, C_u and C_c), anisotropic consolidation and initial fabric anisotropy produced during specimen preparation on the G_max of sand-gravel mixtures. Based on the tests results, an empirical equation is proposed to predict G_max in granular soils, evaluated by the experimental data. The artificial neural network (ANN) and Adaptive Neuro Fuzzy Inference System (ANFIS) models were also applied. Coefficient of determination (R²) and Root Mean Square Error (RMSE) between predicted and measured values of G_max were calculated for the empirical equation, ANN and ANFIS. The results indicate that all methods accuracy is high; however, ANFIS achieves the highest accuracy amongst the presented methods.

• The Journal of Korea Robotics Society
• /
• v.19 no.1
• /
• pp.58-64
• /
• 2024

The ability of the robot gripper to handle a wide range of objects significantly impacts its operational effectiveness. Among the robot grippers commonly used, the economically feasible choice is the relatively simple structure of a parallel gripper. To perform more densely packed tasks with a parallel gripper, it should be capable of handling small objects. Therefore, this study designs a parallel gripper mechanism equipped with assisting grippers to ensure smooth grasping of small objects. The parallel gripper is designed using a rack and pinion gear system, with two additional grippers on both side, and these assisting grippers are designed to be detachable. The two assisting grippers have different type of tip to grasp thin fabric shapes and thin stick shapes. The gripper prototype is used to verify the grasping capabilities for shapes achievable with a conventional parallel gripper and those intended for grasping with the assisting grippers through grasping experiments. Consequently, by equipping a conventional parallel gripper with assisting grippers as in this study, it becomes capable of handling a broader range of objects, in addition to its existing functionality.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.276-287
• /
• 2009

Apparel professionals need to understand the customer to effectively develop, select, and promote apparel products. Analysis of consumer preferences can help in the creative design process. Therefore the purpose of this study was to identify consumer preference by gender in two segmented group; $20{\sim}34$ aged group and $35{\sim}49$ aged group toward men's apparel consumers, considering target customers and female influences on men's wear purchasing. We used questionnaires that were distributed to 600 males and females aged in their 20s to 40s, using stratified sampling method. Only 547 reliable questionnaires were selected for statistical analysis. Chi-Square and t-test were used to analyze the data, using SPSS program. We obtained the following results: 1. We found that there was a significant association between segmented age group and the preference of men's jacket style. Specially $20{\sim}34$ aged group had a significant association with styles of formal jacket, casual t-shirts, casual pants, but $35{\sim}49$ aged group had formal pants style. Looking at the general percentage, semi-formal jacket, slim fit t shirt, straight casual pants were the most favored styles. 2. Age has an significant effect on the preferences of formal menswear fabric patterns and shirt patterns. The results of t-test showed that there found to be significant by gender in character and check pattern of shirts. 3. In design details, the number of button had not significance by gender, and 2 buttons was th most favored by both age groups. The number of gather at the waist had an significant association in $34{\sim}49$ age group. $20{\sim}34$ age group prefer high waist of pants, while $35{\sim}49$ age group prefer low waist of pants. 4. For on time outfit, formal wear and tie ensemble was the most favored with significant difference by age and gender. Formal wear and no tie ensemble favored by about one third of respondents, and more favored by the younger group. For off time outfit, casual jacket and casual pants ensemble was the most favored.