• Korean Journal of Animal Reproduction
• /
• v.24 no.4
• /
• pp.365-373
• /
• 2000

The purpose of this study was to investigate the effects of the fusion pulses and fusion media on fusion rate and the development of embryos produced by somatic cell nuclear transfer in Hanwoo (Korean cattle). Nuclear donor cumulus and fetal fibroblast cells were cultured in Dulbecco's modified Eagle medium supplemented with 10% fetal bovine serum at 38.5$^{\circ}C$ in a humidified atmosphere of 5% $CO_2$in air. The in vitro matured oocytes were enucleated and then the isolated donor cells were introduced. The cumulus cell and cytoplast were fused using one pulse of 70 volts for 40$mutextrm{s}$, two pulses of 70 volts for 40$mutextrm{s}$ and one pulse of 180 volts for 15$mutextrm{s}$. The fetal fibroblast cell and cytoplast were fused using one pulse of 180 volts for 15$mutextrm{s}$ or 30$mutextrm{s}$. The cumulus cell and cytoplast were fused using mannitol and Zimmerman cell fusion medium (ZCFM) as a fusion medium. The fused embryos were activated after the fusion with 10 $\mu$M calcium ionophore for 5 min and 2 mM 6-dimethyl- aminopurine for 3 h. The nuclear transfer embryos were cultured in 500 ${mu}ell$ well of modified CR1aa supplemented with 3 mg/$m\ell$ BSA in th $\varepsilon$ four well dish cove red with mineral oil. After 3 days culture, culture medium was changed into modified CRlaa medium containing 1.5 mg/$m\ell$ BSA and 5% FBS for 4 days. The incubation environment was 5% $CO_2$, 5% $O_2$, 90% $N_2$ at 38.5$^{\circ}C$. When the cumulus cells were fused with enucleated oocytes by three different fusion pulses, one pulse of 180 volts for 15 $mutextrm{s}$ yielded the highest fusion rate and developmental rate to blastocyst among the pulses (P＜0.05). When the fetal fibroblast cells were fused with enucleated oocytes, one pulse of 180 volts for 30$mutextrm{s}$ yielded significantly higher fusion rate compared with that for 15 $mutextrm{s}$(P＜0.05). The present result indicates that the fusion rate between karyoplast and cytoplast was affected by the cell type and the optimal fusion condition was different according to cell type or size. When the fusion was conducted by the use of mannitol and ZCFM, the fusion rate was 71.2% and 65.8%, respectively. The developmental rates to blastocyst were 37.8% and 39.8%, respectively. There was no significant difference between two fusion media in the developmental rate of cumulus cell nuclear transfer embryos. These results indicate that optimal electric current should be selected according to cell type.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.29-29
• /
• 2009

On this research, laser welding technology for manufacturing automobile body is studied. Laser welding technology is one of the important technologies used in the manufacturing of lighter, safer automotive bodies at a high level of productivity; the leading automotive manufacturers have replaced spot welding with laser welding in the process of car body assembly. Korean auto manufacturers are developing and applying the laser welding technology using a high output power Nd:YAG laser and a 6-axes industrial robot. On the other hand, the robot-based remote laser welding system was equipped with a long focal laser scanner system in robotic end effect. Laser system, robot system, and scanner system are used for realizing the high speed laser welding system. The remote laser welding system and industrial robotic system are used to consist of robot-based remote laser welding system. The robot-based remote laser welding system is flexible and able to improve laser welding speed compared with traditional welding as spot welding and laser welding. The robot-based remote laser systems used in this study were Trumpf's 4kW Nd:YAG laser (HL4006D) and IPG's 1.6kW Fiber laser (YLR-1600), while the robot systems were of ABB's IRB6400R (payload:120kg) and Hyundai Heavy Industry's HX130-02 (payload:130kg). In addition, a study of quality evaluation and monitoring technology for the remote laser welding was conducted. The welding joints of steel plate and steel plate coated with zinc were butt and lapped joints. The quality testing of the laser welding was conducted by observing the shape of the beads on the plate and the cross-section of the welded parts, analyzing the results of mechanical tension test, and monitoring the plasma intensity and temperature by using UV and IR detectors. Over the past years, Trumf's 4kW Nd:YAG laser and ABB's IRB6400R robot system was used. Nowadays, the new laser source, robot and laser scanner system are used to increase the processing speed and to improve the efficiency of processes. This paper proposes the robot-based remote laser welding system as a means of resolving the limited welding speed and accuracy of conventional laser welding systems.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.152-154
• /
• 2005

Austenitic stainless steel has good weldability but is sensitive to hot cracking such as solidification crack and liquation crack. In this study, the specimens of dissimilar metals made between austenitic stainless steel and Al-brass were welded by GTAW process using four different filler metals. Cracks were detected in the heat-affected zone of the stainless steel when welded with CuAl, CuSn and NiCu filler metals, but no cracks were detected a Ni filler metal was used. The cracks propagated along the grain boundary in the heat affected zone near the fusion line to base metal of 316L stainless steel. The cracks were located inside the weld bead with very fine hairline crack. All cracks initiated at the fusion line and moved forward in the base metal. From energy dispersion spectroscopy (EDS), Cu peak was detected only in the crack-opening area.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.291.1-291.1
• /
• 2013

We examined the temperature-dependent structural and magnetic properties of HgI2 in the temperature range of 300~400 K. HgI2 is a diamagnetic material and can be used for X-ray or γ-ray detectors. DCmagnetization measurements on HgI2 showed that there is a small but distinguishable change in its diamagnetic properties near 375 K. The magnetic property change is not expected because Hg and I are known as nonmagnetic elements. X-ray diffraction (XRD) measurements revealed a structural transition in the temperature of 350~400 K. Temperature-dependent x-ray absorption fine structure (XAFS) demonstrated that the chemical valence states of both Hg and I did not changed in the temperature range of 300~400 K. However, XAFS revealed that the bond-length disorder was slightly increased in the temperature range, particularly, near Hg atoms. The structural changes of HgI2 are likely related to its diamagnetic property change. We will discuss the relation between the diamagnetic properties and local structural properties of HgI2 in detail.

• Microbiology and Biotechnology Letters
• /
• v.13 no.3
• /
• pp.279-283
• /
• 1985

As a method of breeding L-lysine producing strains, the intergeneric protoplast fusion between Brevibacterium flavum and Corynebacterium glutamicum was performed. As a results, Brevibacterium flavum ATCC 21528 R showed 99％ of protoplast formation and 10％ of regeneration frequencies when treated with 400$\mu\textrm{g}$/$m\ell$ of lysozyme for 12hrs. In Corynebacterium glutamicum ATCC 21514 S, 99％ and 12％ were obtained by treatment of 300$\mu\textrm{g}$/$m\ell$ lysozyme for 12 hrs. In intergeneric protoplast fusion between Brevibacterium flavum ATCC 21528 R and Corynebacterium glutamicum ATCC 21831 S, 1.0$\times$10$^{-6}$ of recombinant frequency per regenerable cells was observed by use of PEG 6000, 30％(w/v). Among the strains obtained KR$_{43}$ strain showed 12％ higher productivity of L-lysine than the parental cell. Then, the activity of aspartokinase of KR$_{43}$ was about 13％ higher than the parental cell.

• Journal of the East Asian Society of Dietary Life
• /
• v.5 no.1
• /
• pp.93-99
• /
• 1995

For the improvement of the L-lysine productivity of Brevibacterium flavum and Corynebacterium glutamicum, fusants were induced by interspecific protoplast fusion of Bacillus subtilis with C. glutamicum and B. flavum. The following results were obtained through protoplast formation of strains condition of protoplast fusion, characteristics of the fusants, and the productivity of lysine form starch. B. flavum BF-5 and C. glutamicum protoplasts were made by the treatment of 0.3unit/$m\ell$ of penicillin G at the early stationary growth phase for 2 hours followed by incubation with 10mg/$m\ell$ of lysozyme at 37$^{\circ}C$ for 120 min. When a mixture of the protoplast was treated with 30% PEG(M.W.6,000) solution containing 50mM CaCl2 at optimal conditions, the intergeneric fusion frequency between protoplasts of C. glutamicum CG-2 and B. subtilis BD 224 was 7.1${\times}$105. The genetic properties on the L-lysine producing fusants were compared with those of parental strains. As a results, the intergeneric fusants were completed in each auxotrophic requirement, resistances for S-(2-amino-ethyl)-L-cysteine and kanamycine were confirmed. And one of fusants selected, FBB-41 were found to be genetically stable fusants. The aspartokinase activity of FBB-41 strain increased than that of the parent strain.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.4
• /
• pp.232-237
• /
• 1993

A strain of yeast which can convert starch directly to ethanol was developed by the intergeneric protoplast fusion between Schwanniomyces alluvius possessing $\alpha$ amylase as well as glucoamylase with debranching activity and FSC-14-75 which previously had been formed from a heterologous transformation and subsequent intergeneric protoplast fusion. Fusants were selected on minimal medium after protoplasts of auxotrophic mutant of S. alluvius fused with heat-treated protoplasts of FSC-14-75 in the presence of 30%(w/v) PEG and 20 mM $CaCl_2$. The fusion frequency was in the range of $10^{-6}$ order. All fusants tested were intermediate types of parental strains for carbon compound assimilation, and their cell volumes were approximately 1.1 times larger than FSC-14-75 and 1.8 times larger than S. alluvius. The fusants were unable to sporulate like FSC-14-75, while S. alluvius could sporulate. In flask scale the most promising fusant, FSCSa-R10-6, produced 7.83%(v/v) and 10.17%(v/v) ethanol from 15% and 20% of liquefied potato starch, respectively, indicating that the fermetation efficiency of each case increased 1.2 times and 1.6 times than that of FSC-14-75. The elution pattern on DEAE-cellulose chromatography showed that FSCSa-R10-6 has four distinct amylase peaks of which two peaks originated from S. alluvius and the other two from FSC-14-75. These results suggest that the enhanced fermentation efficiency of the fusant might be due to almost-complemented parental amylases.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.158-164
• /
• 1999

This paper investigated and evaluated the NASA's Shuttle Imaging Radar-C (SIR-C) multiple frequency SAR data for differential backscattering effects of microwave from the surface geological materials overlying the skarn type mineralization. Although an integrated approach in mineral exploration is more cost effective and is well in use, there are still many technical and scientific issues to be further investigated and researched. In this study we have reprocessed several sets of previously surveyed exploration data and experimented with fuzzy logic digital fusion of the preprocessed data with respect to chosen exploration targets. Among the numerous fuzzy logic operators, which are currently available for a data driven integrated exploration strategy, we used varying combinations of fuzzy MIN, fuzzy MAX, and fuzzy SUM operators along with Gamma operator for fusion of exploration data, including the contact metamorphic zone information. The final exploration target tested was a skarn type W-Mo-F mineralization in the study area. The fuzzy logic derived mineral potential anomaly almost exactly matched the differential backscattering anomalies on the C-band and L-band SIR_C data when overlaid on each other. Although this high degree of correlation between these two data sets is remarkable, the differential backscattering anomaly over the skarn type W-Mo-F mineralization in the study area requires further investigation.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.179-180
• /
• 2014

본 연구에서는 회로 시뮬레이션을 통하여 얻은 ITER 전원 장치의 단락 전자기력의 방향과 크기 성분을 유한요소모델에 맵핑(mapping)한 뒤, 구조해석을 수행함으로써, 단락 시의 전자기력이 직접적으로 구조에 미치는 영향을 고찰하였다. 연구결과는 향후 전기적 구조물에 가해지는 다양한 악조건의 복합적 작용 시에 대한 고려에 있어 기초적인 데이터로 이용할 수 있으리라 사료된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.45-46
• /
• 2012