• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.288-293
• /
• 2023

To optimize the process parameters of laser powder bed fusion process to fabricate the high density STS316L alloy, the effect of laser power, scanning speed and hatching distance on the relative density was studied. Tensile properties of additively manufactured STS316L alloy using optimized parameters was also evaluated according to the build direction. As a result of additive manufacturing process under the energy density of 55.6 J/mm³, 83.3 J/mm³ and 111.1 J/mm³, high density STS316L specimens was suitably fabricated when the energy density, power and scan speed were 83.3 J/mm³, 225 W and 1000 mm/s, respectively. The yield strength, ultimate tensile strength, and elongation of STS316L specimens in direction perpendicular to the build direction, show the most competitive values. Anisotropic shape of the pores and the lack of fusion defects probably caused strain localization which result in deterioration of tensile properties.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.962-968
• /
• 2009

The aim of this study was to compare the effects of oviductal fluid, porcine zygote medium (PZM)-3, PZM-4 and PZM-5, and modified PZM-5 culture media, and determine the effects of zona pellucida (ZP) removal on the development of nuclear transfer (NT) embryos. There were no significant differences in the rates of fusion and cleavage among the five different oviductal fluid concentrations. However, the rates of blastocyst formation and the cell numbers per blastocyst were high in the embryos at the 14 and 28 $\mu{g}$/ml concentrations of oviductal fluid compared to the 0, 56 and 100 $\mu{g}$/ml concentrations. The rates of cleavage and blastocyst formation, and the cell numbers per blastocyst were higher in the PZM-3, PZM-5 and modified PZM-5 media than in the PZM-4 medium. However, there were no significant differences in the fusion rates of oocytes among the four culture media. The cell numbers per blastocyst in the embryos without ZP were significantly greater than those with ZP. However, there were no significant differences in the rates of fusion, cleavage and blastocyst formation between the embryos with and without ZP. In conclusion, we improved blastocyst development and the quality of NT embryos by replacing PVA with 3 mg/ml of BSA in PZM-5 medium and supplementing the PZM-5 medium with 14 $\mu{g}$/ml oviductal fluid. The NT embryos produced by the zona-free NT method had a high rate of blastocyst formation in the modified PZM-5 medium.

• Journal of Biomedical Engineering Research
• /
• v.34 no.3
• /
• pp.111-116
• /
• 2013

Finite element analysis(FEA) has been extensively applied in the analyses of biomechanical properties of stents. Geometrically, a closed-cell stent is an assembly of a number of repeated unit cells and exhibits periodicity in both longitudinal and circumferential directions. This study concentrates on various parameters of the FEA models for the analysis of drug-eluting biodegradable polymeric stents for application to the treatment of coronary artery disease. In order to determine the mechanical characteristics of biodegradable polymeric stents, FEA was used to model two different types of stents: tubular stents(TS) and helicoidal stents(HS). For this modeling, epigallocatechin-3-O-gallate (EGCG)-eluting poly[(L-lactide-co-${\varepsilon}$-caprolactone), PLCL] (E-PLCL) was chosen as drug-eluting stent materials. E-PLCL was prepared by blending PLCL with 5% EGCG as previously described. In addition, the effects of EGCG blending on the mechanical properties of PLCL were investigated for both types of stent models. EGCG did not affect tensile strength at break, but significantly increased elastic modulus of PLCL. It is suggested that FEA is a cost-effective method to improve the design of drug-eluting biodegradable polymeric stents.

• Microbiology and Biotechnology Letters
• /
• v.17 no.2
• /
• pp.88-93
• /
• 1989

To improve a new yeast strain capable of converting xylan to ethanol directly, we tried protoplast fusion between xylose fermenting yeast (Candida sp. X-6-41) and xylan assimilating yeast (Crypto-coccus sp. XB-33), finally selected the most promising two fusants (XFU-1 and XFU-2). As the optimum conditions for protoplast formation, the yeast cells were cultured to exponential phase in YPD and YPX containing 0.6M KCI, respectively, and then treated with zymolyase (0.25mg/$m\ell$), cellulase(4mg/$m\ell$) and 100mM 2-mercaptoethanol at pH 8 and 3$0^{\circ}C$. The protoplasts of parental auxotrophs were fused in the presence of 20mM CaCl$_2$and 40% polyethylene glycol(M.W.4000). The physiological and morphological characteristics of the fusants, such as assimilation of carbon sources, cell size, growth rate, xylanase activity and xylan fermentation ability were investigated. Xylanase activity of fusants that cultured in chemically minimal medium was higher than that of fusants that cultured in completed medium, because xylanase producing activity of xylose fermenting yeast(X-6-41) was inhibited by isoleucine.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.415-420
• /
• 2008

The porcine small intestinal submucosa (SIS) without immunorejection responses and hyalunonic acid (HA) can be used as biomaterials. In this study, we tried to design and characterize novel sponge. SIS- HA sponge was prepared by freeze-drying after addition 1wt% HA solution into fabricated SIS sponge. Sponge was crosslinked with 1-ethyl-(3-3-dimethyl aminopropyl) carbodiimide hydrochloride (EDC) solution with 100mM concentration for 24 hrs and lyophilized. SIS-HA sponge was characterized by scanning electron microscopy and fourier transform infrared spectrometer. And water absorption ability of sponge was evaluated. We seeded NIH/3T3 cells in SIS-HA sponge and cellular attachment was assayed by 3-(4,5-dimethylthiazole-2-yl)-2,5-diphenyltertazolium-bromide (MTT) test. We demonstrated presence of HA in SIS-HA sponge from C-O functional group observed by the FT-IR analysis. Moreover, we confirmed low cytotoxicity and high cell viability of the SIS-HA sponges. Therefore, we could expect that SIS- HA scaffolds are applicable for the tissue regeneration.

• Journal of Powder Materials
• /
• v.30 no.2
• /
• pp.146-155
• /
• 2023

The Ti-6Al-4V lattice structure is widely used in the aerospace industry owing to its high specific strength, specific stiffness, and energy absorption. The quality, performance, and surface roughness of the additively manufactured parts are significantly dependent on various process parameters. Therefore, it is important to study process parameter optimization for relative density and surface roughness control. Here, the part density and surface roughness are examined according to the hatching space, laser power, and scan rotation during laser-powder bed fusion (LPBF), and the optimal process parameters for LPBF are investigated. It has high density and low surface roughness in the specific process parameter ranges of hatching space (0.06-0.12 mm), laser power (225-325 W), and scan rotation (15°). In addition, to investigate the compressive behavior of the lattice structure, a finite element analysis is performed based on the homogenization method. Finite element analysis using the homogenization method indicates that the number of elements decreases from 437,710 to 27 and the analysis time decreases from 3,360 to 9 s. In addition, to verify the reliability of this method, stress-strain data from the compression test and analysis are compared.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.5
• /
• pp.749-757
• /
• 2019

Nitrilase is a valuable hydrolase that catalyzes nitriles into carboxylic acid and ammonia. Its applications, however, are severely restricted by the harsh conditions of industrial reaction processes. To solve this problem, a nitrilase from Acidovorax facilis 72W was inserted into an Escherichia coli-Bacillus subtilis shuttle vector for spore surface display. Western blot, enzyme activity measurements and flow cytometric analysis results all indicated a successful spore surface display of the CotB-nit fusion protein. In addition, the optimal catalytic pH value and temperature of the displayed nitrilase were determined to be 7.0 and $50^{\circ}C$, respectively. Moreover, results of reusability tests revealed that 64% of the initial activity of the displayed nitrilase was still retained at the $10^{th}$ cycle. Furthermore, hydrolysis efficiency of upscale production of cyanocarboxylic acid was significantly higher in the displayed nitrilase-treated group than in the free group expressed by E. coli (pET-28a-nit). Generally, the display of A. facilis 72W nitrilase on the spore surface of Bacillus subtilis may be a useful method for immobilization of enzyme and consequent biocatalytic stabilization.

• Journal of Embryo Transfer
• /
• v.15 no.3
• /
• pp.247-253
• /
• 2000

This study was undertaken to optimize enucleation and reconstitution methods for the production of cloned mice by somatic cell nuclear transfer Outbred ICR mouse oocytes at the metapahse- II stage were retrieved from female mice superovulated by PMSG and hCG. In Experiment 1, oocytes were enucleated in medium supplemented with cytochalasin B (CCB) of 3 levels (0, 7.5 or 15 $\mu\textrm{g}$/mL), and higher rate of encleation was obtained at 7.5 and 15 $\mu\textrm{g}$/mL than at $\mu\textrm{g}$/mL. In Experiment 2, oocytes enucleated in 7.5 $\mu\textrm{g}$/mL CCB-containing medium were reconstituted with different types of somatic cell by following methods; 1) cumulus cells by direct cell injection, 2) cumulus cells by electric fusion (1.25 kV/cm, 2 pulses for each 70 $mutextrm{s}$) or 3) STO cells by the electrofusion. Electrofusion of STO cells with enucleated oocytes yielded the greatest (P<0.05) rate of reconstitution without lysis (76%) than any other combinations. Although significant decrease in the rate of somatic cell introduction was found, the electrofusion of cumulus cells yielded better rate of reconstitution than direct injection (0 vs. 18%). In Experiment 3, the duration of electric stimulation for the fusion was changed to either 50 $mutextrm{s}$ or 90 $mutextrm{s}$, but no significant improvement of reconstitution efficacy was obtained. In conclusion, this study showed that ICR mouse oocytes could be used for the production of reconstituted oocytes and a fusion method of 1.25 KV/cm with 2 pulses using 570 cell was the optimal.

• Applied Microscopy
• /
• v.12 no.2
• /
• pp.45-53
• /
• 1982

Ultrastructural changes of the testis in Pieris rapae L. observed under the electron microscope during the metamorphosis from prepupa to pupa. The peritoneal sheath, epithelium of the follicle and cucticle have the maximum thickness at prepupa stage and afterthen gradually they began to degenerate. The epithelium of the follicle which formed by invagination of the peritoneal sheath is differently differentiationed from the peritoneal sheath and it is similar to the adult's from the pupa 2 days. The cell organelles begin to increase in the cytoplasm of the cyst cell enclosed the sperm bundles at pupa 3 hrs. The electron densed granules which observed in the peritoneal sheath and epithelium of the follicle at prepupa seem to be related with fusion of the testis.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1046-1049
• /
• 1998

This paper deals with the new fault detection technique for transmission line using Neuro-fuzzy Scheme. Neuro-fuzzy Scheme is ANFIS(Adaptive-network Fuzzy Inference System) based on fusion of fuzzy logic and neural networks. The proposed scheme has five layers. Each layer is the component of fuzzy Inference system and performs different action. Using learning method of neural network, fuzzy premise and consequent parameters is tuned properly.