• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.10-11
• /
• 2000

광통신을 이용한 근거리 전송과 장거리 전송에서 1.3 및 1.55 $mu extrm{m}$ 파장 영역의 빛이 사용되고 있다. 향후, 각 가정마다 광선로를 연결하는 Fiber-to-the-home (FTTH)의 개념과 광CATV가 발전함에 따라 1.3 및 1.55 $\mu\textrm{m}$ 빛을 검출하는 소자와 송신하는 소자가 필요하게 된다. 본 논문에서는 이러한 다중파장을 검출할 수 있는 집적소자를 제작 및 측정하였다. 본 논문에서 사용된 epitaxial layer의 구조는 N-InP 기판 위에 1 $\mu\textrm{m}$의 n-InP buffer층, 5층의InGaAs/InGaAsP 다중양자우물과 0.2 $\mu\textrm{m}$ InGaAsP separate confinement heterostructure (SCH) 층, 0.5$\mu\textrm{m}$ InP clad층과 0.1 $\mu\textrm{m}$ InGaAs cap 층으로 구성되어있다. 모든 epi 층은 InP 기판에 격자 정합이 되어있다. 다중양자우물구조는 84 $\AA$의 InGaAs 우물층과 100 $\AA$의 InGaAsP 장벽층으로 구성되며, 상온에서 0.787 eV (1.575 $\mu\textrm{m}$)의 bandgap energy를 갖도록 설계하였다. (중략)

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1641-1644
• /
• 2005

현재의 인터넷과 같은 전자 통신망과 멀티미디어 시스템의 발달은 고속의 대용량 데이터 전송을 필요로 한다. 초고속 통신 시스템에서의 고속 데이터 전송은 주로 광섬유를 사용하는 광통신으로 이루어지고 있다. FTTH(Fiber To The Home)와 같은 광통신 시스템은 멀티미디어 커뮤니케이션을 위해 필요한 큰 데이터 전송률을 제공할 수 있기 때문에 더욱 더 중요성이 높아지고 있으며 이러한 광통신 시스템에서는 통신환경의 영향을 적게 받고 외부 조절이나 부품이 필요하지 않는 수신기 IC 의 개발이 요구되고 있다. 일반적으로 광통신 수신기에는 고속 동작에 적합한 특성을 가진 GaAs-MESFET 가 사용되고 있으나, 본 논문에서는 0.35um CMOS 2-poly 4-metal 공정을 이용하여 5Gbps 광수신기를 설계하였다. 설계된 수신기는 Preamplifier, Main amplifier, ABC 회로로 구성되어 있다. Transimpedance amplifier 형태의 Preamplifier 는 광검출기에 의해 생성된 전류 신호를 전압 신호로 변환한다. ABC 회로는 Peak_Hold 회로와 Bottom_Hold 회로로 구성되어 있다. 기존의 Peak_Hold 회로에서는 다이오드와 hold capacitor 를 이용하여 peak 값을 검출하도록 되어 있는데, 다이오드를 이용하는 경우 작은 입력 신호전압의 Peak 값을 검출하는 데 한계가 있다. 이러한 단점을 보완하고자 전류 거울형태의 Peak_Hold 회로를 설계하였다. 전류거울(current mirror)형태의 출력 신호의 duty error 를 줄이고 비트 에러율(Bit Error Rate)을 개선하는데 효과적이었다. 설계된 광수신기는 30dB 의 입력 dynamic range 와 입력 capacitance 3pF 에서 80MHz 의 대역폭을 가진다. 전력 소비량은 3.3V 전원 전압이 인가된 경우 약 150mW 정도이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.380-389
• /
• 2010

Since the internet is intend to be the best effort service, the system that stream a large amount of high quality medias need a techniques to overcome the network status for implementation. In this paper, we design and implement a method that estimate quickly whether network permits the needed bandwidth of media and a method that control QoS through that. Presented system uses Relative One-Way Delay(ROWD) trend in the case of the former, and leverages temporal encoding among Scalable Video Coding(SVC) that is apt to apply real time comparatively in the case of the latter. The streaming server classifies the medias by real time to several rates and begins transmission from top-level and is reported ROWD trend periodically from the client. In case of the server reported only 'Increase Trend', the sever decides that the current media exceeds the available bandwidth and downgrades the next media level. The system uses probe packet of difference quantity of the target level and the present level for upgrading the media level. In case of the server reported only 'No Increase Trend' by the ROWD trend response of the probe packet from client, the media level is upgraded. The experiment result in a fiber to the home(FTTH) environment shows progress that proposed system adapts faster in change of available bandwidth and shows that quality of service also improves.

• The KIPS Transactions:PartC
• /
• v.14C no.4
• /
• pp.349-358
• /
• 2007

Ethernet Passive Optical Network(EPON), which is one of PON technologies for realizing FTTx(Fiber-To-The-Curb/Home/Office), can cost-effectively construct optical access networks. In addition, EPON can provide high transmission rate up to 10Gbps and it is compatible with existing customer devices equipped with Ethernet card. To effectively control frame transmission from ONUs to OLT EPON can use Multi-Point Control Protocol(MPCP) with additional control functions in addition to Media Access Control(MAC) protocol function. For EPON, many researches on intra- and inter-ONU scheduling algorithms have been performed. Among the inter-ONU scheduling algorithms, IPS(Interleaved Polling with Stop) based on polling scheme is efficient because OLT assigns available time portion to each ONU given the request information from all ONUs. Since the IPS needs an idle time period on uplink between two consecutive frame transmission periods, it wastes time without frame transmissions. In this paper, we propose a dynamic bandwidth allocation algorithm to increase the channel utilization on uplink and evaluate its performance using simulations. The simulation results show that the proposed Two-phase Cycle Danamic Bandwidth Allocation(TCDBA) algorithm improves the throughput about 15%, compared with the IPS and Fast Gate Dynamic Bandwidth Allocation(FGDBA). Also, the average transmission time of the proposed algorithm is lower than those of other schemes.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.709-716
• /
• 2005

QoS is an important requirement of the FTTH (Fiber To The Home) subscriber in access network using E-PON (Ethernet Passive Optical Network). In this research, we describe the structure of the access network and propose a bandwidth guarantee scheme for subscriber and service according to the requirements of the subscriber, service and system. This scheme uses two kinds of the classification table, which are called 'service classification table' and 'subscriber classification table.' Using the classification table, we can identify the flow of the subscriber and service. Also, we compute the number of hash table entry to minimize the loss ratio of flows using the M/G/k/k queueing model. Finally, we apply the DRR scheduling through virtual queueing per subscriber instead of the aggregated class.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.52-59
• /
• 2007

In this paper, we analyzed and measured implant isolation characteristics for a 1.25 Gbps monolithic integrated hi-directional (M-BiDi) optoelectronic system-on-a-chip, which is a key component to constitute gigabit passive optical networks (PONs) for a fiber-to-the-home (FTTH). Also, we derived an equivalent circuit of the implant structure under various DC bias conditions. The 1.25 Gbps M-BiDi transmit-receive SoC consists of a laser diode with a monitor photodiode as a transmitter and a digital photodiode as a digital data receiver on the same InP wafer According to IEEE 802.3ah and ITU-T G.983.3 standards, a receiver sensitivity of the digital receiver has to satisfy under -24 dBm @ BER=10-12. Therefore, the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysed and measured results of the implant structure, the M-BiDi SoC with the implant area of 20 mm width and more than 200 mm distance between the laser diode and monitor photodiode, and between the monitor photodiode and digital photodiode, satisfies the electrical crosstalk level. These implant characteristics can be used for the design and fabrication of an optoelectronic SoC design, and expended to a mixed-mode SoC field.