• 전기학회논문지
• /
• 제62권2호
• /
• pp.208-212
• /
• 2013

Dye-sensitized solar cells (DSCs) have taken much attention due to their low cost and easy fabrication method compare to silicon solar cells. But research on cost effective DSC is prerequisite for commercialization. Fluorine doped tin oxide (FTO) which have been commonly used for electrode substrate as electron collector occupied most percentage of manufacturing cost. Therefore we studied FTO-less DSC using sputtered Ti deposited glass as photoelectrode instead of FTO to reduce manufacturing cost. Ti films sputtered on the glass for different time, 5 to 20 minutes with decreasing sheet resistance as deposition time increases. A light source illuminated to counter electrode in order to overcome opaque Ti films. The efficiency of DSC (Ti20) made Ti sputtered glass for 20 min as photoelectrode was 5.87%. There are no significant difference with conventional cell despite lower manufacturing cost.

• 한국전기전자재료학회논문지
• /
• 제27권11호
• /
• pp.725-729
• /
• 2014

In this study, a transparent conductive oxide (TCO)-less dye-sensitized solar cells (DSSCs) was fabricated by using titanium (Ti) electrode to replace the Fluorine-doped tin oxide (FTO) for the reduction of manufacturing cost. Ti film was formed by electron beam evaporation method and the results showed the sheet resistance of Ti electrodes with a thikness of 500 nm similar to FTO. In case of power conversion efficiency (PCE), a DSSC with Ti electrodes showed a lower value than that with FTO by 0.38%. For the investigation of the difference, the DSSCs were measured and analyzed by using electrochemical impedance analyzer (EIS).

• Molecules and Cells
• /
• 제43권1호
• /
• pp.58-65
• /
• 2020

Fat mass and obesity-associated (FTO) gene helps to regulate energy homeostasis in mammals by controlling energy expenditure. In addition, FTO functions in the regulation of obesity and adipogenic differentiation; however, a role in osteogenic differentiation is unknown. This study investigated the effects of FTO on osteogenic differentiation of C3H10T1/2 cells and the underlying mechanism. Expression of osteogenic and endoplasmic reticulum (ER) stress markers were characterized by reverse-transcriptase polymerase chain reaction and western blotting. Alkaline phosphatase (ALP) staining was performed to assess ALP activity. BMP2 treatment increased mRNA expression of osteogenic genes and FTO. Overexpression of FTO increased expression of the osteogenic genes distal-less homeobox5 (Dlx5) and runt-related transcription factor 2 (Runx2). Activation of adenosine monophosphate-activated protein kinase (AMPK) increased FTO expression, and there was a positive feedback loop between FTO and p-AMPK. p-AMPK and FTO induced mild ER stress; however, tunicamycin-induced severe ER stress suppressed FTO expression and AMPK activation. In summary, FTO induces osteogenic differentiation of C3H10T1/2 cells upon BMP2 treatment by inducing mild ER stress via a positive feedback loop with p-AMPK. FTO expression and AMPK activation induce mild ER stress. By contrast, severe ER stress inhibits osteogenic differentiation by suppressing FTO expression and AMPK activation.

• Nutrition Research and Practice
• /
• 제6권1호
• /
• pp.78-85
• /
• 2012

Whether the $FTO$ polymorphisms interact with environmental factors has not yet been evaluated in associations with metabolic syndrome (MS) risk. The present study investigated the association of the $FTO$ rs9939609 genotypes, body mass index (BMI), and lifestyle-related factors including smoking, alcohol drinking, physical activity, and diet with MS incidence. A population-based prospective cohort study comprised 3,504 male and female Koreans aged 40 to 69 years. At the beginning of the study, all individuals were free of MS and known cardiovascular disease. Incident cases of MS were identified by biennial health examinations during a follow-up period from April 17, 2003 to April 15, 2009. Pooled logistic regression analysis was applied to obtain relative odds (RO) of MS with its 95% confidence interval (CI). After controlling for potential MS risk factors, we observed no association between the rs9939609 genotypes and MS incidence. In analysis stratified by BMI, however, carriers with the $FTO$ risk allele whose BMI is $29kg/m^2$ or greater showed an approximately 6-fold higher RO (95% CI: 3.82 to 9.30) compared with non-carriers with BMI less than $25kg/m^2$. In particular, the association between the rs9939609 variants and MS risk was significantly modified by high BMI (P-value for interaction < 0.05). Such significant interaction appeared in associations with central obesity and high blood pressure among the MS components. Because carriers of the $FTO$ risk alleles who had BMI of $29kg/m^2$ or greater are considered a high risk population, we suggest that they may need intensive weight loss regimens to prevent MS development.

• 전자공학회논문지
• /
• 제51권3호
• /
• pp.45-54
• /
• 2014

전류제한 에피 구조를 적용하여 MINT에서 개발한 최적화된 공정방법으로 InP Gunn 다이오드 칩을 제작하고 칩을 이용하여 MINT의 최적화된 조건을 이용하여 패키지 하였다. 또한 제작된 패키지 InP Gunn 다이오드의 RF 특성을 측정하기 위하여 2체배 구조의 W-band 도파관 FTO(Fixed Tuned Oscillator)를 설계 및 제작하였다. 패키지된 InP Gunn 다이오드는 ceramic ring, Au plating stud와 lid 그리고 Maltese cross로 구성되어있다. 측정된 20개의 InP Gunn 다이오드는 최대 전류가 399 mA의 전류특성을 가지고 92.9~94.78 GHz에서 발진하였고 11.8~17.8 dBm 의 출력전력을 얻었다.

• 조명전기설비학회논문지
• /
• 제27권3호
• /
• pp.50-54
• /
• 2013

In this work, the effects of blocking layer and optimally fabricated electrolyte were investigated with respect to impedance and conversion efficiency of the cells.A layer of $TiO_2$ less than ~200nm in thickness, as a blocking layer, was deposited by rf sputtering onto the F:$SnO_2$ (FTO) glass to be isolated from the electrolyte in dye-sensitized solar cells (DSCs). Also, optimum condition of electrolytes preparation for DSCs was investigated. 3-methoxyppropionitrie and redox pairs with LiI and $I_2$ were used as solvents for fabrication of electrolyte. The electrochemical impedances of DSCs using this photo-anode were $R_1$: 13.8, $R_2$: 15.1, $R_3$: 11.9 and $R_h$: $8.3{\Omega}$, respectively. The $R_2$ impedance related by electron transportation from porous $TiO_2$ to FTO showed lower than that of normal DSCs. The photo-conversion efficiency of prepared DSCs was 6.4% and approximately 1.3% higher than general one.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.114-118
• /
• 2011

Dye-Sensitized Solar Cells(DSSCs) consist of a titanium dioxide($TiO_2$) nano film of the photo electrode, dye molecules on the surface of the $TiO_2$ film, an electrolyte layer and a counter electrode. But two transparent conductive oxide(TCO) substrates are estimated to be about 60[%] of the total cost of the DSSCs. Currently novel TCO-less structures have been investigated in order to reduce the cost. In this study, we suggested a TCO-less DSSCs which has titanium double layer electrodes. Titanium double layer electrodes are formed by electron-beam evaporation method. Analytical instruments such as electrochemical impedance spectroscopy, scanning electron microscope were used to evaluate the TCO-less DSSCs. As a result, the proposed structure decreases energy conversion efficiency and short-circuit current density compared with the conventional DSSCs structure with FTO glass, while internal series impedance of TCO-less DSSCs using titanium double layer electrodes decreases by 27[%]. Consequently, the fill factor is improved by 28[%] more than that of the conventional structure.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.344-348
• /
• 2011

A layer of $TiO_2$ thin film less than ~200nm in thickness, as a blocking layer, was deposited by 13.56 MHz radio frequency magnetron sputtering method directly onto the anode electrode to be isolated from the electrolyte in dye-sensitized solar cells (DSCs). This is to prevent the electrons from back-transferring from the electrode to the electrolyte ($I^-/{I_3}^-$). The presented DSCs were fabricated with working electrode of F:$SnO_2$(FTO) glass coated with blocking $TiO_2$ layer, dye-attached nanoporous $TiO_2$ layer, gel electrolyte and counter electrode of Pt-deposited FTO glass. The effects of blocking layer were studied with respect to impedance and conversion efficiency of the cells. The, electrochemical impedances of DSCs using this electrode were $R_1$: 13.9, $R_2$: 15.0, $R_3$: 10.9 and $R_h$: $82{\Omega}$. The $R_2$ impedance related by electron movement from nanoporous $TiO_2$ to TCO showed lower than that of normal DSCs. The photo-conversion efficiency of prepared DSCs was 5.97% ($V_{oc}$: 0.75V, $J_{sc}$: 10.5 mA/$cm^2$, ff: 0.75) and approximately 1% higher than general DSCs sample.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.372-372
• /
• 2011

염료 감응형 태양전지는 상,하판 투명전극(TCO), 나노입자의 다공질 TiO2, 염료 고분자 층으로 구성된 광전극과 투명전극 및 백금(Pt) 박막으로 구성된 상대전극 그리고 두 전극 사이를 산화 환원용 전해질 용액으로 채우고 있는 구조이다. 이 구조에서 투명전극(TCO)은 재료비의 많은 부분을 차지하므로 제작비용 절감을 위한 TCO-less에 관한 연구가 활발히 진행 중이다. 본 연구에서는 TCO-less 염료 감응형 태양전지 제작을 위해 이중층 Ti 전극 구조를 제안하였다. 제작과정은 광조사 부분을 확보한 유리기판에 e-beam 증착법을 이용해 Ti 전극을 증착시킨 후 TiO2를 Ti전극과 일부 중첩하여 인쇄하고 그 위에 두 번째 Ti전극을 제작한다. 이중층 Ti전극 구조는 SEM, EIS 등의 분석장비를 사용하였고 기존 FTO 구조에 비해 단락전류밀도, 에너지 변환효율은 감소하였으나 직렬 내부저항이 약 27% 감소하여 fill factor가 28% 향상된 결과를 얻을 수 있었다.

• 청정기술
• /
• 제20권3호
• /
• pp.306-313
• /
• 2014

나노다공성 $TiO_2$ 필름은 주로 염료감응형 태양전지의 작동전극으로 사용된다. 지금까지 염료감응형 태양전지의 광전환효율을 높이기 위해 $TiO_2$ 나노구조체에 대한 다양한 연구가 시도되어왔다. 본 연구에서는 수열합성법을 이용하여 FTO glass 위에 루타일 $TiO_2$ 나노로드를 수직적으로 성장시켰고 그 위에 아나타제 $TiO_2$ 필름을 재 합성하였다. 이 새로운 방법은 아나타제 $TiO_2$ 합성시 요구되는 시드층 합성단계를 피할 수 있었다. 밀집한 아나타제 $TiO_2$ 층은 전자생성층으로써 고안되었고 시드층 대신 합성된 루타일 $TiO_2$ 나노로드는 생성된 전자들이 FTO glass로 이동하는 통로역할을 하게 되었다. 전자이동률을 증진시키기 위해 루타일 나노로드에 $TiCl_4$ 수용액을 이용하여 표면 처리하였고 열처리 후 표면 위에 얇은 아나타제 $TiO_2$ 필름을 형성시켰다. 합성된 루타일-아나타제 $TiO_2$ 구조체의 두께는 $4.5-5.0{\mu}m$이고 셀 테스트 결과 3.94%의 광전환효율을 얻게 되었다. 이는 루타일 $TiO_2$ 나노로드 전극과 비교했을 때 광전환효율이 상당히 향상되는 것을 확인할 수 있었다.