• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.930-934
• /
• 2006

This paper reports a change of carbon nanotubes(CNTs) properties by post-treatment process after growth of CNTs. CNTs were treated by thermal method and solution method, and then investigated in detail using field emission scanning electron microscopy(FE-SEM), high resolution transmission scanning electron microscopy(HR-TEM), RAMAN spectroscopy, and Fourier Transform Infrared Spectrometer (FT-IR). FT-IR spectra showed that the amount of hydroxyl generated on surface of CNTs were changed with post-treatment condition. FE-SEM and TEM images were shown CNTs diameter and density variations were dependent with their treatment conditions. RAMAN spectroscopy was shown that carbon nanotubes structure vary with treatment conditions.

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.23-27
• /
• 2012

The color of a natural diamond that contains nitrogen impurities can be enhanced by a high pressure high temperature (HPHT) treatment. Type IaAB diamond samples containing nitrogen impurities were executed by HPHT process of 5.6 Gpa, 10 min by varying the annealing temperature at 1600, 1650, and $1700^{\circ}C$. Property characterization was carried out using an optical microscope, FT-IR spectrometer, low-temperature PL spectrometer, and micro Raman spectrometer. By observing optical micrographs, it can be seen that diamond sample began to alter its color to vivid yellow at $1700^{\circ}C$. In the FT-IR spectrum, there were no Type changes of the diamond samples. However, amber centers leading to brown colors lessened after $1700^{\circ}C$ annealing. In the PL spectrum, all the H4 centers became extinct, while there were no changes of yellow color center H3 before or after treatment. In the Raman spectrum, no graphite spots were detected. Consequently, diamond color enhancement can be done by higher than $1700^{\circ}C$ HPHT annealing at 5.6 GPa-10 min.

• Restorative Dentistry and Endodontics
• /
• 제25권2호
• /
• pp.272-288
• /
• 2000

수산화칼슘은 여러 약리작용으로 인해 근관소독제로 널리 사용되고 있는 약제이다. 근관 내에 수산화칼슘을 투약한 후 gutta-percha와 더불어 산화아연-유지놀계 근관시멘트로 근관을 충전하는 경우 근관시멘트의 물성에 변화가 있다는 보고가 있다. 따라서 본 연구에서는 수산화칼슘과 산화아연-유지놀 간의 반응에 의해 생성되는 수산화칼슘-유지놀 화합물의 반응성을 확인하기 위하여 수산화칼슘, 유지놀, 산화아연-유지놀, 수산화칼슘-유지놀 및 수산화칼슘-산화아연-유지놀 화합물을 XRD, FT-IR spectrophotometer 및 FT-NMR spectrometer로 분석하여 다음과 같은 결과를 얻었다. 1. 수산화칼슘과 산화아연-유지놀 간의 반응으로 생성된 화합물은 다음과 같았다. 2. 수산화칼슘은 유지놀과 화학결합(이온결합)을 하는 것으로 나타났다. 3. $Ca^{2+}$과 유지놀 사이의 결합은 단순 이온결합이다. 따라서 수산화칼슘-산화아연유지놀 화합물은 중화반응에서 생기거나 외부에서 유입된 물이 존재시 쉽게 이온화되어 물리적 성질이 저하될 것으로 생각된다.

• 한국광학회지
• /
• 제28권2호
• /
• pp.53-58
• /
• 2017

본 논문은 집적화된 소형의 분광모듈 구현을 위한 나노회절격자의 설계 및 제작에 관한 연구이다. 제안된 평면 구조의 나노회절격자는 회절격자로부터 반사된 빛을 집광하기 위하여 비등간격의 구조로 설계되었으며, 400 nm에서 650 nm까지의 파장 대역폭에서 균등한 분해능을 가지도록 비대칭 V 홈 구조를 가지도록 설계되었다. 최적 설계된 나노회절격자를 저가, 대량 생산에 적합한 UV-NIL 공정을 통해 제작하기 위하여 FT-IR 흡수스펙트럼을 분석하였으며, 이를 통해 5 nm 이내의 치수 정밀도를 가진 고분자 나노회절격자를 제작 할 수 있었다. 제작된 고분자 기반 나노회절격자를 이용한 집적형 분광모듈은 250 nm의 파장 대역폭에서 각 첨두파장의 기준으로 5 nm의 균등한 파장 분해능을 확인하였으며, 이는 다양한 분광모듈의 적용분야에 적용될 것으로 기대된다.

• 한국의류산업학회지
• /
• 제8권4호
• /
• pp.465-470
• /
• 2006

Walnut hull is a by-product from the Walnut tree, used as natural dyestuff from ancient times. This study was done to examine the effects of extractive conditions on the properties of walnut hull extracts for making efficient use of the walnut hull as a natural colorant. Aqueous extracts of walnut hull were prepared at various extractive concentration, temperature and time. Then they were characterized using UV-Vis. Spectrophotometer, FT-IR Spectrometer, Prep Liquid Chromatography, and Energy dispersive X-ray spectrometer. The aqueous extracts have two absorbency peaks of UV-Vis. Spectrum, shoulder type peak in the range of 270-280 nm and broad type band around 420 nm. Intensity of absorbency is increased with increase of extraction concentration and time. However, Boiling temperature extraction method showed the most efficiency of all. Intensity of absorbency is also affected by extraction pH. The Prep LC examined two kinds of isolated colorant with different molecular weight. FT-IR spectra of hull extracts showed an absorption band around $3400cm^{-1}$, the peaks at $1700-1600cm^{-1}$, which are characteristic of aromatic compounds with unsaturated ketone and benzene ring. It showed that the extraction contained some mineral ions, such as K, Ca, Si, Mg.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.52-52
• /
• 2010

본 연구에서 우리는 HPHT 처리 전 FT-IR spectrometer를 이용한 사전분석을 통해 type Ia brown 다이아몬드를 IaA, IaB, IaAB (A>B), IaAB (A=B), IaAB (A$1700-1800^{\circ}C$, 5 GPa에서 다이아몬드가 흑연화 되지 않는 범위 하에 HPHT처리를 시행하였다. 자외선-가시광선 분광분석기(UV-Vis Spectrometer, Shimadzu UV 3101PC)를 사용하여 350~800 nm에서의 가시광선 범위를 0.1nm의 분해능으로 투과(Transmittance) 모드로 측정하였고, 퓨리에 변환 적외선 분광분석기(FT-IR spectrometer, Jasco-4100)을 사용하여 $400{\sim}6000cm^{-1}$의 범위에서 $4cm^{-1}$ 의 분해능으로 흡수(Absorption) 모드로 측정한 후 HPHT 처리 전후를 비교 분석하였다. 또한 광루미네선스(Photoluminescence) 분석은 325 nm He-Cd laser를 광원으로 한(PL, Spectra-pro 2150i, Spectra-pro 2300i micro-spectrometer) 및 532 nm green laser를 광원으로 한(PL, SAS 2000)를 사용하여 각각 350~600 nm, 550~1100 nm의 범위에서 0.1nm step으로 측정하여 HPHT 처리전과 후를 비교 분석하였다. HPHT처리 후 모든 시료는 N3 center (415.4 nm), H4 center (496.4nm) 및 platelet와 연관된 ($1363\;cm^{-1}$)의 peak가 감소하였고, H3 center (503.2 nm)와 G-band가 증가하는 경향을 나타내었다. 또한 HPHT 처리 시 질소의 B집합보다 A집합이 더 감소하는 경향을 나타내었으며, A 또는 B집합의 파괴에서 발생된 질소 원자에 의해 질소의 interstitial center (594 nm)가 증가함을 알 수 있었다. HPHT 처리 후 모든 시료는 (N-V)- center가 생성됨을 확인 할 수 있었다. 결론적으로 본 연구를 통해 HPHT 처리를 통해 다이아몬드 내에 존재하는 질소결합관련 상태의 변화를 확인할 수 있었다.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.138-144
• /
• 1998

에탄올을 용매로 사용한 철질산염(Fe$(MO_3)_3{\cdot}9H_2O$) 용액의 가용매분해 및 중합반응을 거친후 $350^{\circ}C$의 온도로 열처리를 하여 0.5$\alpha$m이하의 크기를 갖는 $\alpha$-$Fe_2O_3$ 미분말을 합성하였다. 반응시간에 따른 pH 변화와 적외선 분광 분석을 통해 용액내의 반응을 규명하였으며, 열분석(DSC), X-선 회절분석 및 적외선 분광(FT-IR) 분석을 통해 $\alpha$-$Fe_2O_3$가 형성되는 분해과정에 대해 분석하였다. 또한 반응온도와 철질산염의 농도를 변화시켜 각각 $\alpha$-$Fe_2O_3$분말의 입자크기에 미치는 영향을 조사하였다.

• 한국재료학회지
• /
• 제17권12호
• /
• pp.676-681
• /
• 2007

According to progress rapidly digitalization, networked and mobilization of electronics industry, there are demands for being smaller, thinner, more light, and more efficient complex functions of electronic devices which are wireless devices, semi-conductors, packages and mobile devices. Therefore, the solder resist on a printed circuit board have been required with the high resolution and the eco-friendly materials in the surface treatments such as high heating process and coating process with electrolysis. In this study, the photoinitiator initiator and monomers of the solder resist were prepared with their contents for reducing the occurrence of the under-cut. We investigated the sample surface by UV/VIS spectrometer, FT-IR, OM after HASL and ENIG process. From our results, it is possible to get a high adhesion of resist with optimal contents between the photoinitiator initiator and monomers after surface treatments.

• 통합자연과학논문집
• /
• 제2권4호
• /
• pp.275-279
• /
• 2009

Recently, number of studies for porous silicon (PSi) have been investigated by many researchers. Multistructured porous silicon such as a distributed Bragg reflector (DBR) PSi, has been a topic of interest, because of its unique optical properties. DBR PSi were prepared by using an electrochemical etch of $P{^+}{^+}$-type silicon wafer with resistivity between 0.1 and $10m{\Omega}cm$. The electrochemical etch with square wave current density results in two different refractive indices in the porous layer. In this work, DBR porous silicon chips for a simple and portable organic vapor-sensing device have fabricated. The optical characteristics of DBR PSi have been investigated. DBR porous silicon have been characterized by FT-IR and Ocean optics 2000 spectrometer. The device used DBR PSi chip has been demonstrated as an excellent gas sensor, showing a great senstivity to organic vapor at room temperature.

• 대기
• /
• 제25권4호
• /
• pp.601-610
• /
• 2015

This study measured the emissivity spectra of 5 major rock-forming minerals using a Fourier Transform Infrared (FT-IR) spectrometer in the spectral region of $650{\sim}1400cm^{-1}$. The mineral samples are quartz, albite, bytownite, anorthite, and sandstone. We compared emissivity spectra measured in this study with spectra provided by Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and Arizona State University (ASU). The spectral features of emissivity such as Reststrahlen Band (RB) and Christiansen Feature (CF) locations were compared. Results showed that both CF and RB locations of emissivity spectra measured in this study were similar to those from ASTER and ASU. In the case of quartz, the RB was occurred in the region of $700{\sim}850cm^{-1}$ and $1050{\sim}1250cm^{-1}$. The spectral position of emissivity peak was in good agreement with the location of ASTER and ASU. For plagioclase (albite, bytownite, and anorthite), the spectral location of CF was shifted toward larger wavenumber and the emissivity value was increased in the region of $870{\sim}1200cm^{-1}$ with Ca percentage. The CF of anorthite and bytownite was occurred at $1245.79cm^{-1}$, and that of albite was occurred at $1283.79cm^{-1}$. We also confirmed that emissivity feature of sandstone includes both emissivity features of quartz and calcite. However, there were some differences in the magnitude of emissivity and locations of RB and CF. These were due to the differences in measurement methods, and differences in particle size and temperature of samples.