• Journal of radiological science and technology
• /
• v.11 no.1
• /
• pp.25-31
• /
• 1988

Studies on the clinical significance with Amerlex $FT_{4}$ RIA kit observing the determination of $FT_{4}$ were investigated using a tracer as $^{125}I-T_{4}$ derivative which is not almostly bound to thyroxine binding globulin, etc. The results are followed; 1. $FT_{4}$ value($1,55{\pm}0.38ng/100ml$) of normal group was not accorded that of hyperthyroidism with Amerlex $FT_{4}$ RIA kit, and was higher than that of hypothyroidism. 2. $FT_{4}$ value was lower level in chronic-kidney disfunction syndrome whereas, it was normal in a cancer patient, a woman in pregnancy and a patient in TBG disfunction. 3. The value of this method is a good corelationship at that of equilibrium dialysis method. (r=0.931) 4. $FT_{4}$ value by this kit was linear relationship to those of the other kit (Gamma Coat and Liquisol), and the normal value of each methods was also similar. As mentioned above, this method is more simple and rapid, compared to the other method. Therefore, it was thought that this method is a very useful clinically.

• Mass Spectrometry Letters
• /
• v.3 no.2
• /
• pp.43-46
• /
• 2012

In this study, comprehensive two dimension gas chromatography (2D GC-MS) and 15 T Fourier transform ion cyclotron resonance mass spectrometry (15T FT-ICR MS) connected to atmospheric pressure photo ionization (APPI) have been combined to obtain detailed chemical composition of a diesel oil sample. With 2D GC-MS, compounds with aliphatic alkyl, saturated cyclic ring(s), and one aromatic ring structures were mainly identified. Sensitivity toward aromatic compounds with more than two aromatic rings was low with 2D GC-MS. In contrast, aromatic compounds containing up to four benzene rings were identified by APPI FT-ICR MS. Relatively smaller abundance of cyclic ring compounds were found but no aliphatic alkyl compounds were observed by APPI FT-ICR MS. The data presented in this study clearly shows that 2D GC-MS and 15T FT-ICR MS provides different aspect of an oil sample and hence they have to be considered as complementary techniques to each other for more complete understanding of oil samples.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.456-462
• /
• 1994

The purpose of this study was to investigate the relationship between the caries experience and anxiety level to the dentist in the preschool children. 511 preschool children were brought to the dental hospital and examined for caries experience. Caries experience was measured as dDT index, fFT index, dDfFT index, dDT rate, and fFT rate. Children were requested to draw a dentist. Drawings were analyzed by the method of Human Figure Drawing Anxiety Score. Pearson correlation coefficents and their significance were calculated between caries experience and anxiety scores. There were significant negative correlation between fFT index and anxiety scores, between dDfFT index and anxiety scores, and between fFT rate and anxiety scores. There was significant positive correlation between dDT rate and anxiety scores. The results seemed to suggest that dental treatment experience reduced children's anxiety toward dentists. But, because there was obvious negative correlation between age and anxiety scores, age factor should be considered in the interpretation of the results.

• Biomedical Science Letters
• /
• v.11 no.2
• /
• pp.129-134
• /
• 2005

Three different deconvolution techniques for quantifying cerebral blood flow (CBF) from whole brain $T2^{\ast}-weighted$ bolus tracking images were implemented (parametric Fourier transform P-FT, parametric single value decomposition P-SVD and nonparametric single value decomposition NP-SVD). The techniques were tested on 206 regions from 38 hyperacute stroke patients. In the P-FT and P-SVD techniques, the tissue and arterial concentration time curves were fit to a gamma variate function and the resulting CBF values correlated very well $(CBF_{P-FT}\;=\;1.02{\cdot}CBF_{p-SVD},\;r^2\;=\;0.96)$. The NP-SVD CBF values correlated well with the P-FT CBF values only when a sufficient number of time series volumes were acquired to minimize tracer time curve truncation $(CBF_{P-FT}\;=\;0.92{\cdot}CBF_{NP-SVD},\;r^2\;=\;0.88)$. The correlation between the fitted CBV and the unfitted CBV values was also maximized in regions with minimal tracer time curve truncation $(CBV_{fit}\;=\;1.00{\cdot}CBV_{ Unfit},\;^r^2\;=\;0.89)$. When a sufficient number of time series volumes could not be acquired (due to scanner limitations) to avoid tracer time curve truncation, the P-FT and P-SVD techniques gave more reliable estimates of CBF than the NP-SVD technique.

• Journal of Marine Bioscience and Biotechnology
• /
• v.14 no.2
• /
• pp.69-75
• /
• 2022

The micro-Kjeldahl method, a common technique for analyzing crude proteins, is time-consuming and dangerous due to the employment of reagents such as sulfuric acid and sodium hydroxide. However, a Fourier transform near-infrared (FT-NIR) spectrophotometer analysis can be completed in under a minute after simple pre-processing if data has been gathered using sufficient reference material in advance. Furthermore, the use of safe reagents in this technique ensures the safety of the experimenter and the environment. In addition, a portable FT-NIR spectrophotometer enables real-time measurement at processing or distribution sites and has recently gained popularity. The standard errors of calibration and regression (r²) for the calibration result for estimating the crude protein content of dried laver were 0.9775 and 1.2526, respectively. The standard error of prediction was 1.1814, and the r² was 0.9303 in the validation results, which was a good level. In the present study, a method for predicting the crude protein content of dried laver using an FT-NIR spectrophotometer in the range of 29%-40% crude protein content has been reported.

• Korean Journal of Food Science and Technology
• /
• v.47 no.1
• /
• pp.20-26
• /
• 2015

This study aimed to establish a rapid system for discriminating the cultivation origins and cultivars of dry persimmons, using metabolite fingerprinting by Fourier transform infrared (FT-IR) spectroscopy combined with multivariate analysis. Whole-cell extracts from the sepals of four Korean cultivars and two different Chinese dry persimmons were subjected to FT-IR spectroscopy. Principle component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) of the FT-IR spectral data successfully discriminated six dry persimmons into two groups depending on their cultivation origins. Principal component loading values showed that the 1750-1420 and $1190-950cm^{-1}$ regions of the FT-IR spectra were significantly important for the discrimination of cultivation origins. The accuracy of prediction of the cultivation origins and cultivars by PLS regression was 100% (p<0.01) and 85.9% (p<0.05), respectively. These results clearly show that metabolic fingerprinting of FT-IR spectra can be applied for rapid discrimination of the cultivation origins and cultivars of commercial dry persimmons.

• Korean Journal of Clinical Laboratory Science
• /
• v.47 no.4
• /
• pp.324-331
• /
• 2015

Thyroid hormones are essential for cellular energy homeostasis and regulation by interacting with the sympathetic nervous system. This study was conducted to investigate the relationship between thyroid hormone and risk factors of metabolic syndrome for medical checkups of male patients. The study subjects were 12,250 males between 20~80 years old who visited the hospital for a health check-up at one General Hospital in Gyeonggi-do during the period of January 2011 to December 2013. According to the American Heart Association/National Heart, Lung, and Blood Institute (AHA/NHLBI), the metabolic syndrome criteria is defined as the presence of 3 or more risk factors. FT4 was lower in the metabolic syndrome group than in the normal group (p<0.001). The level of FT4 decreased as the levels of abdominal obesity (p=0.001), hypertriglyceridemia (p<0.001), blood pressure (p=0.005) and blood glucose (p=0.005) increased. The TSH level increased hypertriglyceridemia (p=0.047). FT4 had an influence on the waist circumference and triglyceride (p<0.001). HbA1c, insulin, HOMA-IR, hs-CRP were higher in the lowest quartile than in the highest quartile (p<0.001). FT4 had effects on the waist circumference and triglyceride, but TSH had no effect on metabolic syndrome risk factors. The metabolic syndrome was lower in the highest quartile of FT4 than in its lowest quartile.

• Membrane Journal
• /
• v.21 no.2
• /
• pp.127-140
• /
• 2011

The effects of $TiO_2$ photocatalyst coating bead concentration, water-back-flushing period (FT), and back-flushing time (BT) were investigated in hybrid process of ceramic ultrafiltration and photocatalyst for advanced drinking water treatment in this study. Photocatalyst coating bead concentration was changed in the range of 10~40 g/L, FT in 2~10 min and BT in 6~30 sec. Then, we observed the effects on resistance of membrane fouling $(R_f)$, permeate flux (J) and total permeate volume $(V_{\Upsilon})$ during total filtration time of 180 min. As decreasing photocatalyst coating bead concentration, $R_f$ increased and J decreased. $V_{\Upsilon}$ was the highest value of 8.85 L at 40 g/L of photocatalyst coating bead concentration. At FT change experiment, $R_f$ decreased and J increased as decreasing FT. Then $R_f$ decreased and J increased according to increasing BT at BT change experiment. Because at NBF (no back-flushing) dramatic membrane fouling reduced membrane pore size, turbid and dissolved organic matters ($UV_{254}$ absorbance) could be removed efficiently. Therefore, treatment efficiencies of turbidity and dissolved organic matters were the highest at NBF. Then by cleaning effect of photocatalyst coating bead, the treatment efficiencies of turbidity and dissolved organic matters increased as decreasing FT and increasing BT.

• Membrane Journal
• /
• v.12 no.1
• /
• pp.8-20
• /
• 2002

In this study using $N_2$-back flushing, which wwas not the general back-flushing method of membranes, the discharged wastewater from a paper plant was filtrated by 4 kinds of tubular carbon ceramic ultrafiltration membranes. We could in vestigate effects of $N_2$-back flushing period, transmembrane pressure (TMP)and flow rate and find optimal operating conditions. The $N_2$-back flushing time (BT) was fixed at 40 sec, filtration times (FT) were changed in 4~32 min, TNP in $1.0~3.0kg_f/cm^2$ the flow celocities in 0.53~1.09cm/s. The optimal conditions were discussed in the viewpoints of dimensionless permeate flux ($J/J_0$), toal permeate volume ($V_T$) and resistance of membrane fouling ($R_f$). Optimal back-flushing period was BT/FT=0.167 (FT=8 min ), in which more $V_T$ was obtained than that in BT/FT=0.083 (FT=4 min) which was the most friquent back-flushing condition. Then rising TMP should increase the driving force, and more $V_T$ could be accumulated. And rising flow rate should decrease membrane fouling increase permeate flux, and more $V_T$could be produced. Average rejection rates of pollutants were higher than 95% for turbidity and 45~83% for $COD_{Cr}$, but rejection rates of total dissolved solid (TDS) were lower than 10%.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.45-52
• /
• 2008

The GTL(Gas to Liquids) technology, manufacturing synthesized oil from natural gas, had been developed about 1920 for the military purpose by Fischer and Tropsch, German scientists. And 1960, Sasol company had started commercializing the FT(Fischer-Tropsch) synthesis technology, for the transport fuel in South Africa. Until a recent date, the commercialization of GTL technology had been delayed by low oil price. But concern about depletion of petroleum resources, and development in synthesizing technology lead to spotlight on the GTL businesses. Especially, Qatar, which has rich natural gas fields, aims at utilizing natural gas like conventional oil resources. Therefore, around this nation, GTL plants construction has been promoted. There are mainly 3 processes to make GTL products(Diesel, Naphtha, lube oil, etc) from natural gas. The first is synthesis gas generation unit reforming hydrogen and carbomonoxide from natural gas. The second is FT synthesis unit converting synthesized gas to polymeric chain-hydrocarbon. The third is product upgrading unit making oil products from the FT synthesized oil. There are quite a little sulfur, nitrogen, and aromatic compounds in GTL products. GTL product has environmental premium in discharging less harmful particles than refinery oil products from crude to the human body. In short, the GTL is a clean technology, easier transportation mean, and has higher stability comparing to LNG works.