• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1461-1462
• /
• 2004

• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.608-612
• /
• 2005

Fourier transform-near infrared (FT-NIR) spectroscopy is a simple, rapid, non-destructive technique which can be used to make quantitative analysis of chemical composition in grain. An interest in total dietary fiber (TDF) of grain such as rice has been increased due to its beneficial effects for health. Since measuring methods for TDF content were highly depending on experimental technique and time consumptions, the application of FT-NIR spectroscopy to determine TDF content in milled rice. Results of enzymatic-gravimetric method were $1.17-1.92\%$ Partial least square (PLS) regression on raw NIR spectra to predict TDF content was developed Accuracy of prediction model for TDF content was certified for regression coefficient (r), standard error of estimation (SEE) and standard error of prediction (SEP). The r, SEE and SEP were 0.9705, 0.0464, and 0.0604, respectively. The results indicated that FT-NIR techniques could be very useful in the food industry and rice processing complex for determination of TDF in milled rice on real time analysis.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.3
• /
• pp.319-328
• /
• 2000

The Message-Passing Interface(MPI) is a standard interface for parallel programming environment, based on that application programs run on the processors of a parallel computer. Processor nodes execute processes consisting the program by passing messages to one another. During executing, however, if a fault occurs on a processor node or a process, this will result an inconsistent state, and consequently, the whole program will have to be stopped. To solve this problem, in this paper, we propose a fault-tolerant message passing interface(FT-MPI) by adding a fault manager module to MPI. The proposed FT-MPI does not need any hardware support, and each application program based on MPI can run on the FT-MPI without any modification. The proposed fault tolerance scheme uses the so-called hot-spare process duplication method, and verified by simulations that application programs run despite of any fault with less than 5% overhead on execution time.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.417-421
• /
• 2014

The beet armyworm, Spodoptera exigua is pest which is difficult to control. For eco-friendly beet armyworm managements, we isolated entomopathogenic fungi from soil samples by insect-bait method using Tenebrio molitor and conducted bioassay to larvae of beet armyworm. The result of bioassay, a selected strain Metarhizium anisopliae FT83 caused 100% mortality against first ~ third instar larva of S. exigua at $1{\times}10^8conidia/ml$ and medial lethal time ($LT_{50}$) were 0.5 days, 2.6 days and 2.5 days respectively. Mortality against fourth and fifth larvae were $83.3{\pm}6.2%$ and $86.0{\pm}5.7%$ and medial lethal time ($LT_{50}$) were 4.2 days and 3.6 days respectively. Mortality against pupae and eggs of S. exigua were 100%. M. anisopliae FT83 showed high virulence at all developmental stages of S. exigua.

• Analytical Science and Technology
• /
• v.26 no.2
• /
• pp.120-124
• /
• 2013

It was studied to analyze the $CO_2$, CO, $SO_2$ standard gases of combustion gases by the open path FT-IR spectrometer with passive mode for remote analysis of air pollutant and volcano gases without IR lamp. As result, it was confirmed to have good linearity with more than 0.9 as correlation coefficients on the calibration curve of $CO_2$, CO concentration by MLR method. But in the case of $SO_2$, because the correlation coefficients were 0.88, the linearity could be lower. Finally, the concentration of three gases was predicted on in-site fire experiment under the condition of quantitative analysis. It could measure high $CO_2$ concentration as predicted result, but didn't measure the CO and $SO_2$. According to the result, it was possible to measure the combustion gases to long distance by only open path FT-IR spectrometer without infrared lamp.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.1
• /
• pp.49-56
• /
• 2003

A steady-state performance simulation program using $EASY5^{(R)}$ on the turboprop engine was developed through in this study. The PT6A-62 turboprop engine which is the power plant of the first Korean basic trainer KT-1, was selected for this study. In order to evaluate the proposed perfrmance model the analysis results of $EASY5^{(R)}$ model were compared with the simulated results by the GASTURB program, which is well blown commercially for the simulation performance analysis at various cases. The first case was the uninstalled condition with various altitudes from ground to 30000ft and flight Mach No. 0. The second case was the install condition with various altitude from ground to M at the maximum take off and the ECS (Environmental Control System) OFF conditions. The third case was install condition with the altitude range from 5000 ft to 1000ft and Mach No. 0.1 to 0.3 at maximum ECS operating condition. It was confirm that the results by the $EASY5^{(R)}$ model were well agreed with those by GASTURB within maximum 5.0%

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.213-219
• /
• 2009

Crystallization experiments were performed by addition of various amino acids into biomineralization mixture of calcium carbonate. Liquid-liquid reaction of calcium carbonate was investigated by mixing calcium chloride, sodium carbonate and additives such as silk fibroin, asparagine, aspartic acid, glutamic acid and glycine. Also, the effects of reaction time, pH and solution concentration were observed. Analysis of crystals was done by FE-SEM, XRD, FT-IR equipments. FE-SEM was used in order to analyze morphology and crystal size. XRD was used to measure peak intensities and presence of $CaCO_3$ crystal. Two kinds of crystals were confirmed by FT-IR spectrum. Crystal distribution with reaction time was identified with measured peak areas of XRD and FT-IR data.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.4
• /
• pp.339-346
• /
• 2015

The synthesis of Fischer-Tropsch (FT) oil is the catalytic hydrogenation of CO to give a range of products, which can be used for the production of high-quality diesel fuel, gasoline and linear chemicals. This studied catalyst was prepared Cobalt-supported alumina and silica by the incipient wet impregnation of the nitrates of cobalt, promoter and organic solvent with supports. Cobalt catalysts were calcined at $350^{\circ}C$ before being loaded into the FT reactors. After the reduction of catalyst has been carried out under $450^{\circ}C$ for 24h, FT reaction of the catalyst has been carried out at GHSV of 4,000/hr under $200^{\circ}C$ and 20atm. From these experimental results, we have obtained the results as following; In case of $SiO_2$ catalysts, the activity of 12wt% $Cobalt-SiO_2$ synthesized by organic solvent was about 2 or 3 times higher than the activity of 12wt% $Cobalt-SiO_2$ catalyst synthesized without organic solvent. In particular, the activity of the $Cobalt-SiO_2$ catalyst prepared in the presence of an organic solvent P was two to three times higher than that of the $Cobalt-SiO_2$ catalyst prepared without the organic solvent. Effect of Cr and Cu metal as a promoter was found little. 200 h long-term activity test was performed with a $Co/SiO_2$ catalyst prepared in the presence of an organic solvent of Glyoxal solution.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.17-22
• /
• 2003

The experimental FT-IR spectra and DTA curves of the $PbO-Bi_2O_3-B_2O_3-SiO_2$ glasses have been investigated. The composition ratio dependence of glass transition temperature showed that the structure of this glass system changes at 60 mol% $Bi_2O_3$. We have observed that the FT-IR spectra of the investigated samples with high bismuth content are dominated by bands associated to the structural units of the heaviest cation, $Bi^{3+}$ and the boron atoms in the treated samples are three and four coordinated even for very high $Bi_2O_3$ content. The low intensity of these non-bridging oxygen bands, for high PbO content glasses, can be attributed to the strong network-forming roles of PbO. The glasses absorption bands exhibited a greater change in intensities on crystallization.

• Membrane Journal
• /
• v.19 no.3
• /
• pp.194-202
• /
• 2009

In this study periodic water-back-flushing using permeate water was performed to minimize membrane fouling and to enhance permeate flux in advanced water treatment by tubular ceramic ultrafiltration membrane for Gongji stream in Chuncheon city. The back-flushing period (FT, filtration time) 2 min with periodic water-back-flushing of 15 sec showed the highest value of dimensionless permeate flux (permeate flux vs. initial permeate flux), and the lowest value of resistance of membrane fouling. Also in the results of BT effect at fixed FT 10 min, BT (back-flushing time) 20 sec showed the lowest value of resistance of membrane fouling and the highest value of dimensionless permeate flux, and we could be obtained the highest total permeate volume of 107.3 L. Consequently FT 10 min and BT 20 sec could be the optimal condition in Gongji stream water treatment, which was the exactly same results of our previous tubular alumina microfiltration. Then the average rejection rates of pollutants by our tubular ceramic UF system were 97.0% for turbidity, 32.1 % for chemical oxygen demand by manganese method, 28.8% for ammoniac nitrogen and 54.4% for T-P.