• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.8
• /
• pp.1007-1012
• /
• 2010

The aim of the present study was to describe whether abnormal cervical mucus discharge (A-CMD) or pathogens in cervical mucus discharge (CMD) have effects on reproductive performance of cows and heifers in estrus. Animals having clear discharges (68 cows, 38 heifers) with normal viscosity and without bad odor were grouped as normal cervical mucous discharge (N-CMD) group. The other animals (84 cows, 32 heifers) were grouped as A-CMD group. Microorganisms isolated from samples were divided into three groups as uterine pathogens (UP), potential uterine pathogens (PUP) or opportunistic uterine pathogens (OUP). Presence of PUP was associated with A-CMD for both cows (p<0.01) and heifers (p<0.02). First service conception rates (FS-CR) were lower in cows positive for PUP (p<0.01). Moreover, presence of PUP and OUP affected FS-CR in heifers (p<0.01). Although A-CMD significantly affected FS-CR in cows (p<0.04), it did not affect FS-CR in heifers. Differences in average open day for cows (p<0.02) and first service age for heifers (p<0.01) were significant between N-CMD and A-CMD groups, respectively. The current study suggested that CMD should be evaluated more carefully when there are infertility problems. In addition to the known microorganism that causes sterility and infertility in the UP group, pathogens in the PUP group should be considered for their potential to cause infertility.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.471-474
• /
• 2006

Several planktonic dinoflagellates, including Cochlodinium polykrikoides (p), are known to produce red tides responsible for massive fish kills and serious economic loss in turbid Northwest Pacific (Korean and neighboring) coastal waters during summer and fall seasons. In order to mitigate the impacts of these red tides, it is therefore very essential to detect, monitor and forecast their development and movement using currently available remote sensing technology because traditional ship-based field sampling and analysis are very limited in both space and temporal frequency. Satellite ocean color sensors, such as Sea-viewing Wide Field-of-view Sensor (SeaWiFS), are ideal instruments for detecting and monitoring these blooms because they provide relatively high frequency synoptic information over large areas. Thus, the present study attempts to evaluate the red tide index methods (previously developed by Ahn and Shanmugam et al., 2006) to identify potential areas of red tides from SeaWiFS imagery in Korean and neighboring waters. Findings revealed that the standard spectral ratio algorithms (OC4 and LCA) applied to SeaWiFS imagery yielded large errors in Chl retrievals for coastal areas, besides providing false information about the encountered red tides in the focused waters. On the contrary, the RI coupled with the standard spectral ratios yielded comprehensive information about various ranges of algal blooms, while RCA Chl showing a good agreement with in-situ data led to enhanced understanding of the spatial and temporal variability of the recent red tide occurrences in high scattering and absorbing waters off the Korean and Chinese coasts. The results suggest that the red tide index methods for the early detection of red tides blooms can provide state managers with accurate identification of the extent and location of blooms as a management tool.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.219-224
• /
• 2001

Spectral phase interferometry for direct electric-field reconstruction (SPIDER) was fabricated and used to characterize pulses from a Ti:sapphire oscillator. In the SPIDER apparatus, two replicas of the input pulse were generated with a time delay of 200 fs and were upconverted by use of sum-frequency generation with a strongly chirped pulse using a 8-cm-long SFIO glass block at a 30-11m-thick type II BBO (p-BaBz04) crystal. The resulting interferogram was recorded with a UV-enhanced CCD array in the spectrometer. The spectral phase was retrieved by SPIDER algorithm in combination with independently measured pulse spectrum and the corresponding temporal intensity profile was reconstructed with a duration of 19 fs. As an independent cross-check of the accuracy of the method, we compared the interferometric autocorrelation (lAC) signal calculated from the SPIDER data with a separately measured lAC. The conventional, but unjustified, method of fitting a sechz pulse to the autocorrelation deceivingly yielded a pulse duration of 15 fs. This systematic underestimation of the pulse duration affirms the need for a complete characterization method. From the consideration in this paper, we concluded that the SPIDER could provide an accurate characterization of femtosecond pulses. ulses.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.57-65
• /
• 2002

In this paper, a 2.5V 10-bit 300MSPS CMOS D/A Converter is described. The architecture of the D/A Converter is based on a current steering 8+2 segmented type, which reduces non-linearity error and other secondary effects. In order to achieve a high performance D/A Converter, a novel current cell with a low spurious deglitchnig circuit and a novel inverse thermomeer decoder are proposed. To verify the performance, it is integrated with $0.25{\mu}m$ CMOS 1-poly 5-metal technology. The effective chip area is $1.56mm^2$ and power consumption is about 84mW at 2.5V power supply. The simulation and experimental results show that the glitch energy is 0.9pVsec at fs=100MHz, 15pVsec at fs=300MHz in worst case, respectively. Further, both of INL and DNL are within ${\pm}$1.5LSB, and the SFDR is about 45dB when sampling, frequency, is 300MHz and output frequency is 1MHz.

• The Korean Journal of Community Living Science
• /
• v.23 no.2
• /
• pp.129-136
• /
• 2012

Dioxins are chemical substances that are not properly decomposed degradation under natural photochemical, biological and chemical conditions in the environment, and bio-accumulate through the food chain, so pose a risk of causing adverse effects to human health and the environment. Ninety seven percent of human exposure to dioxins comes through meat, fish, dairy consumption and so on. Pork is the largest proportion meat aspect of daily intake in the Korean food. Pigs are three times more than Cattle in terms of breeding population and production amount in the world, and the amount is increasing every year. Therefore, it is necessary to monitor the exposure level of dioxins in pig's body. Also, it is required to evaluate the presence of these chemical substances in the pig's feed grain such as corn, soybeans, and tallow. The purpose of this study was to evaluate PCDD/Fs in pig's feed to search the origin of PCDD/Fs. Feed samples obtained were wheat from East Europe, corn from South America and America, soybean meal from Korea, America, South America and India and tallow from Korea. The preparation of samples was based on the EPA method 1613. Instrumental analysis was based on the use of high resolution gas chromatography coupled to high resolution mass spectrometry (HRGC/HRMS). The concentrations of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and 1,2,3,7,8-pentachlorodibenzo-p-dioxin (PCDD), which are the most toxic potent dioxins, were not observed in any of the samples. However OCDD was detected in most of the samples. The TEQs in the feed samples were ranged from 0 pg TEQ/g to 0.09841 pg TEQ/g. Especially, the high level of TEQs was observed in the samples of wheat from East Europe and soybean meal from Korea.

• New & Renewable Energy
• /
• v.8 no.2
• /
• pp.14-23
• /
• 2012

The TMY (Typical Meteorological Year) for the solar energy study is generated using observation data with 22 solar sites from KMA (Korea Meteorological Administration) during 11 years (2000-2010). The meteorological data for calculation the TMY are used solar radiation, temperature, dew point temperature, wind speed and humidity data. And the TMY is calculated to apply the FS (Finkelstein and Schafer) statistics and RMSE (Root Mean Squared Error) methods. FS statistics performed with each point and each variable and then selected top five candidate TMM months with statistical analysis and normalization. Finally TMY is generated to select the highest TMM score with evaluation the average errors for the 22 whole points. The TMY data is represented average state and long time variations with 22 sites and meteorological data. When TMY validated with the 11-year daily solar radiation data, the correlation coefficient was about 0.40 and the highest value is 0.57 in April and the lowest value is 0.23 in May. Mean monthly solar radiation of TMY is 411.72 MJ which is 4 MJ higher than original data. Average correlation coefficient is 0.71, the lowest correlation is 0.43 in May and the highest correlation is 0.90 in January. Accumulated annual solar radiation by TMY have higher value in south coast and southwestern region and have relatively low in middle regions. And also, differences between TMY and 11-year mean of is distributed lower 100 MJ in Kyeongbuk, higher 200 MJ in Jeju and higher 125 MJ in Jeonbuk and Jeonnam, respectively.

• Fisheries and Aquatic Sciences
• /
• v.10 no.2
• /
• pp.93-101
• /
• 2007

Concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were determined in marine sediments from Mokpo coastal water of Korea. Total and toxic equivalent (TEQ) concentrations of PCDD/Fs ranged from 19.4 to 175pg/g dry weight and ranged from 0.195 to 2.87 pg WHO-TEQ/g dry weight, respectively. These PCDD/F concentrations were below the safety sediment value (20 pg TEQ/g dry weight) of chronic toxicity. A highly significant correlation between the concentrations of PCDD/Fs and total organic carbon (TOC) in marine sediments was observed. Overall PCDD/F concentrations in the sediments were elevated in rivers and at inner locations close to harbors, indicating that these contaminants derived from local discharges of human activities. PCDD/F concentrations measured in our study were lower than those in several industrialized areas in Korea. Nonparametric multidimensional scaling (MDS) ordination showed that combustion processes from industrial complexes are the major source of PCDD/Fs in Mokpo coastal water.

• Clinical and Experimental Pediatrics
• /
• v.56 no.2
• /
• pp.80-85
• /
• 2013

Purpose: Febrile seizures (FS) are seizures that occur between the age of 6 and 60 months, but its pathophysiology still is not fully understood. There is limited information about the correlation between levels of selenium and leptin with FS. This study aimed to determine the relationship between serum levels of selenium and leptin in children with FS. Methods: This case-control study was conducted in a University Hospital in Shahrekord, Iran, in 2011. The serum levels of selenium and leptin of 25 children with simple febrile seizure (case group) were compared with 25 febrile children without seizure (control group) in acute phase and after three months. The levels of serum selenium and leptin were measured by flame atomic absorption spectrophotometer and enzyme-linked immunosorbent assay method, respectively. Results: In acute phase, the mean serum level of selenium in case and control groups were $95.88{\pm}42.55$ and $113.25{\pm}54.43{\mu}g/dL$, respectively, and difference was not significant (P=0.415), but after three months, this level had a significant increase in both groups (P<0.001). In acute phase, the mean serum leptin level in case and control groups were $0.94{\pm}0.5$ and $0.98{\pm}0.84$ ng/mL, respectively, but difference was not significant (P=0.405). After three months, serum leptin level had no significant change in both groups (P=0.882). Conclusion: These observations suggest that serum levels of selenium and leptin have not specific relation with FS but overllay is lower, however, further study is recommended. Also selenium level in stress and acute phase was significantly lower than recovery phase.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.127-136
• /
• 2008

This paper proposes the efficient system for automatic design of FSS(Frequency Selective Surface) with periodic pattern and frequency characteristics specified by operator. The proposed system derives optimal design parameters through tool for analysis of FSS with arbitrary pattern, DB(Data Base) implemented from limited simulation and measurement data of FSS, and GA(Genetic Algorithm) for optimizing design parameters. FSS analysis tool consists of two analysis tools. One is the simulator for analysis of monolayer FSS that using moment method, another is the tool with approximated analysis method of FSS with dielectric layer. Given pattern configuration and characteristics specified by operators, the DB system searches the best matching FSS, and provides initial genes to GA from the searched parameters, which drastically reduces running time of GA for finding the FSS design parameters. In this paper, the proposed design system is verified through simulation and measurement about FSS with various patterns.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.80-93
• /
• 2000

This study measured the shearing resistance of the roots of the Pinus Koraiensis by the tensile strength gained through their individual tensile test for the Root Reinforcement Model. On the basis of the shearing resistance value calculated through such a process the factor of safety(Fs) was comparatively presented by using the simplified Janbu Method in PCSTABL5M, the slop-analyzing software which had been developed in Purdue University of the U.S.A according to the shape of a slope and the type of soil. The results to have measured a stress and the factor of safety(Fs) by experiment are as follows. 1) The mean root diameter of the Pinus Koraiensis used for this experiment was 2.483mm and the mean tensile stress was calculated as 422.846(kgf/$\textrm{cm}^2$). In the strain ratio of material and the elastic modulus was measured 7.8%, 9,291.92(kgf/$\textrm{cm}^2$). 2) The shearing strength including the resistance of soil and root is expressed as Rt=C+Cr+$\sigma$.tan . ΔCr(kg/$\textrm{cm}^2$) of the shearing resistance calculated by estimating the areal ratio of roots at 10 is 0.253(kgf/$\textrm{cm}^2$). 3) As the result of making an analysis of the natural slope stability by the soil parameter, the factor of safety(Fs) was calculated at 1.795 in CL, and the stability analysis of the root reinforcement slope, Fs was calculated at 1.952. However, since a precise analysis of the controlled factors of the slope analyses are demanded for more accurate dynamic analyses, the future demands a study on this.