• Journal of Korea Fishing Vessel Association
• /
• v.13
• /
• pp.20-26
• /
• 1982

• 선박안전기술공단 소식
• /
• s.5
• /
• pp.4-5
• /
• 2006

한국∙알제리 선박안전 기술세미나 개최/ 기술교류 다변화를 위한 중국출장/ 강원도립대학과 기술교류협력 협정체결/ 신한은행과 MOU체결/ “FRP선박의 화재안전성 및 방화구조연구”관련 일본방문

• 선박안전기술공단 소식
• /
• s.3
• /
• pp.5-5
• /
• 2006

FRP어선 스테인리스강 축의 방식시스템 연구결과 지역설명회 개최/ 수상레저기구 검사 · 검정 및 등록제도 안내 책자 발간/ IMO 회의 참석

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.3
• /
• pp.250-256
• /
• 2008

Generally the side plate materials of FRP ship are composed of glass fiber and unsaturated polyester resin composites(GFRP composites). In this study, the effect of applied load and sliding speed on friction and wear characteristics of these materials were investigated at ambient temperature by pin-on-disc friction test. The cumulative wear volume, friction coefficient and wear rate of these materials for SiC abrasive paper were determined experimentally. The cumulative wear volume showed a tendency to increase nonlinearly with increase of sliding distance and was dependent on applied load and sliding speed for these composites. The friction coefficient of GFRP composites was increased as applied load increased at same sliding speed in wear test. It was verified by SEM photograph of worn surface that major failure mechanisms were microfracture, deformation of resin, cutting and cracking.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.1
• /
• pp.47-54
• /
• 2003

The majority of small/medium sized shipbuilders in Korea is poor in capital and then, should be restructured as an efficient production system with low investment. Due to considering this situation, the cooperative work system is proposed, in this study, as more effective production system for small/medium sized shipbuilder The cooperative work system Is the production system that many small/medium sized shipbuilders in a group jointly share the common facilities except minimum equipments and have managerial cooperation such as joint purchase of raw materials. The efficiency of cooperative work system is proved from economic and technical point of view with the case study of FRP shipbuilders of Sapjin industrial complex located at Mokpo area.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.21
• /
• pp.66-77
• /
• 2006

Stainless steel has been stably used closed by passivity oxidation films(Cr₂O₃) is made by neutral atmospheric environment. However, passivity oxidaton films of the surface of stainless steel occasionally comes to be destroyed in seawater which is influenced by an environment having galogen ion like Cl‾, then, localization corrosion comes to occur Stainless steel 304 for shaft system material of the small-size FRP fishing boat on seawater environments made an experiment on simulation of sacrifical anode(Al, Zn). Through these experiment and study, following results have been obtained ; According to the field inspection and corrosion simulation, the corrosion on the 2nd class stainless steel shaft(STS304) in FRP fishing boat has been verified to occur by crevice corrosion and galvanic corrosion etc., According to the comparison and analysis of Stainless steel 304 was severely corroded, but, protected shaft specimen was not totallay corroded. This result is assumed to be made by the facts that anodic reaction, Fe → fe²+＋ 2e¯, has been restricted by the cathodic protection current of sacrificial anode material.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.20
• /
• pp.18-28
• /
• 2005

연안소형어선에 주로 사용하는 FRP선질은 가볍고 강도는 우수하나 인화성이 높아서 기관실 화재사고 등 위험에 노출되어 있고 선박 제작 과정에서 인체에 해로운 유해성분이 발생할 뿐만 아니라, 폐선의 경우 산업폐기물로써 환경오염에 큰 영향을 미치고 있다. 그런 반면에, 알루미늄합금 어선은 FRP 어선의 단점을 보완할수 있는 재료로써, 고강도 경량화의 효과를 낼 수 있고, RFP어선보다 인화성이 낮아서 열에 강하고 내구성이 높고 강선보다 해수의 부식방지에 뛰어나므로 알룸늄어선의 개발이 요구되고 있다. 이번 호에서는 알루미늄선박 건조시 각각의 단위공정에 대한 작업방법, 작업순서 및 주의사항 등 표준에 대해 코리아타코마조선공법(주)의 알루미늄선박 작업지침과 KSB 0897(불황가스 및 아크용접 작업표준)를 일부 발췌하여 기술하고자 한다.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.32
• /
• pp.2-11
• /
• 2012

강화플라스틱(FRP)이 가진 저비용 장점에 비하여 화재 및 환경오염 문제가 대두됨에 따라서 알루미늄 소형 선박에 대한 수요가 증가하고 있다. 알루미늄 재질의 선박 건조에도 절단, 성형, 용접 및 조립의 과정이 필요하지만, 소형 선박에는 박판이 사용되기 때문에 일반 강선과는 다른 공법 및 가공 조립법이 사용된다. 본 기사는 알루미늄 재료의 절단 공법, 용접 공법의 현황과 미래 기술 방향을 정리하였다. 또한 성형 공정의 문제점과 이를 위한 개선 방안을 제시함으로써 알루미늄 선박의 건조 생산성 향상 및 정도 관리의 편의성을 위한 방안을 모색하고자 한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.6
• /
• pp.762-781
• /
• 2018

This paper presents the ballistic armor performance examination and thickness estimation for the latest naval ship structure materials in the Republic of Korea. Up to date, research regarding methods of ballistic experiments establishing database on the latest hull structure materials as well as a precise method of estimating required thickness of armor against specific projectiles have been rarely researched. In order to build a database and estimate proper thicknesses of structure materials, this study used four structure materials that have been widely applied in naval ships such as AH36 steel, AL5083, AL5086, and Fiber Reinforced Plastics (FRP). A $7.62{\times}39mm$ mild steel core bullet normally fired by AK-47 gun was considered as a threat due to its representativeness. Tate and Alekseevskii's penetration algorithm was also used to calculate a correction factor (${\alpha}$) and then estimate the armor thickness of naval ship hull structure materials with a given impact velocity. Through live fire experiments, the proposed method performance difference was measured to be 0.6% in AH36, 0.4% in AL5083, 0.0% in AL5086, and 8.0% in FRP compared with the experiment results.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.22
• /
• pp.34-53
• /
• 2007

In the case of hull material. large sized merchant ships are made of steel, on the other hand FRP or wood are used for small sized fishing boats. At present in Korea approximately 88,500 fishing boats are in operation of which 70% are made of FRP In the meantime, stainless steel is frequently used as shaft materials of the small-size FRP fishing boat. Namely, the kinds of shaft materials are STS 304(18Cr-8Ni), STS 316(18Cr-12Ni-2.5Mo steel) and STS 630(17Cr-Ni-Nb steel)etc. Among these things, STS 304 which is the cheapest and having ordinary corrosion resistance is most widely used as 2nd class shaft material. But, using STS 304 for shaft system material of the small-size FRP fishing boat on seawater environments entails a severe corrosion which causes shaft system troubles. Particularly, the corrosions tend to be concentrated of the stern and bow side, propeller shaft surface of inside of stern tube and the boat having no stern cooling pipe line system. As a solution for those problems, research on the ways to mitigate corrosion on the part of 2nd class stainless steel shaft have been undertaken. In the result, not only clarification for the reason of corrosion of the part of stainless steel shaft used mainly for the small-size FRP fishing boat was done, but also most optimal corrosion protection system was developed by experimenting shaft's protection simulation based of the electrochemical cathodic protection principle. In addition, verification through the field test on the optimal cathodic corrosion protection method by means of aluminum sacrificial anode was carried out. In this study, effective and economical shaft's protection system is suggested to the small-size FRP fishing boat operator by substantiating the results obtained from the research on the optimal cathodic protection.