Browse > Article
http://dx.doi.org/10.3796/KSFT.2008.44.3.250

A study on abrasive wear characteristics of side plate of FRP ship  

Kim, Byung-Tak (School of Mechanical Engineering, Pukyong National University)
Koh, Sung-Wi (School of Mechanical Engineering, Pukyong National University)
Publication Information
Journal of the Korean Society of Fisheries and Ocean Technology / v.44, no.3, 2008 , pp. 250-256 More about this Journal
Abstract
Generally the side plate materials of FRP ship are composed of glass fiber and unsaturated polyester resin composites(GFRP composites). In this study, the effect of applied load and sliding speed on friction and wear characteristics of these materials were investigated at ambient temperature by pin-on-disc friction test. The cumulative wear volume, friction coefficient and wear rate of these materials for SiC abrasive paper were determined experimentally. The cumulative wear volume showed a tendency to increase nonlinearly with increase of sliding distance and was dependent on applied load and sliding speed for these composites. The friction coefficient of GFRP composites was increased as applied load increased at same sliding speed in wear test. It was verified by SEM photograph of worn surface that major failure mechanisms were microfracture, deformation of resin, cutting and cracking.
Keywords
Abrasive wear; Wear characteristics; SiC paper; Cumulative wear volume; Friction coefficient;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Suh, N.P., 1977. An overview of the delamination theory of wear. Wear, 44(1), 1-16   DOI   ScienceOn
2 Evans, D.C. and J.K. Lancaster, 1979. The wear of polymers. Treatise on materials science and technology, 13, ed. Academic Press, New York, USA, pp. 85-139
3 Koh, S.W. and B.C. Yang, 2004, Effect of sliding velocity on the wear and friction characteristics of a carbon fiber composites. Journal Kor. Soc. Fish. Tech., 40(4), 337-343   과학기술학회마을   DOI   ScienceOn
4 Shim, H.H., O.K. Kwon, J.R. Youn, 1991. Effects of structure and humidity on friction and wear properties of carbon fiber reinforced epoxy composites. Proc. SPE ANTEC'91, pp. 1977
5 Sung, N. and N.P. Suh, 1979. Effect of fiber orientation in friction and wear of fiber reinforced polymer composites. Wear, 53(1), 129-141   DOI   ScienceOn
6 Suh, N.P. and H.C. Sin, 1981. The genesis of friction. Wear, 69(1), 91-114   DOI   ScienceOn
7 Koh, S.W. and B.C. Yang, H.J. Kim and J.D. Kim, 2004. Effect of sliding velocity on the wear and friction characteristics of a carbon fiber composites. Journal Kor. Soc. Fish. Tech., 40(4), 344-350   과학기술학회마을   DOI   ScienceOn
8 Chand, N., A. Naik and S. Neogi, 2000. Three-body abrasive of short glass fibre polyester composite. Wear, 242(1 2), 38-46   DOI   ScienceOn
9 Fridrich, K., 1986. Friction and Wear of Polymer Composites, Composite Materials Series, 1, ed. Elsevier, Amsterdam, pp. 233-287
10 Kim, H.J., J.J. Lee, J.D. Kim and S.W. Koh, 2005. A study on the impact fracture behavior of side plate of 35 ton class ship. Journal Kor. Soc. Pow. Sys. Eng., 9(4), 137-142   과학기술학회마을
11 Koh, S.W. and B.C. Yang, H.J. Kim and J.D. Kim, 2006. Study on abrasive wear behavior of a carbon fiber composites. Journal Kor. Soc. Pow. Sys. Eng., 10(1), 46-51
12 Ravikiran, A. and S. Jahanmir, 2001. Effect of contact pressure and load on wear of alumina. Wear, 251(1-12), 980-984   DOI   ScienceOn
13 Ren, J.R., K.H. Kim and S.S. Kim, 2001. Tribological evaluation of dental composite resins containing prepolymerized particle fillers. KSME International Journal, 15(6), 727-734   과학기술학회마을