• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.146-152
• /
• 2010

Recently, the applied frequency of composite materials was increased from the viewpoint of lightweight, high strength and low cost when a leisure boat and a fishing boatwere built. However, studies on the mechanical properties of composite material with ship are rare. Specially, a leisure boat and fishing boat with FRP had been built by hand lay-up method. However, the vacuum infusion method is rising recently for ship building. The manufactured these FRP plates were combined by using the adhesive. Therefore, in this study Cleavage peel strength, Shear strength and fatigue limit of adhesive bonds by tensileloading were estimated. From test results, the strengths of FRP specimens made by the vacuum infusion method are higher than that of the hand lay-up method.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.22
• /
• pp.4-18
• /
• 2007

The purpose of this study is to improve the fire safety characteristic of the FRP vessel. In this study, we analyzed the fire accidents of FRP vessel and investigated the ruels of domestic and other country for the structural fire protection standard of FRP vessel. We suggested the fire-retardent resin quality standard, and the improvement program for fire safety of FRP vessel.

• Journal of Industrial Technology
• /
• v.38 no.1
• /
• pp.9-13
• /
• 2018

FRP(Fiber Reinforced Plastic) ships are easy to manufacture and repair. Also they are more durable and cheaper than steel wires and neck lines. Therefore FRP ships are widely used in small ships. In Korea, the amount of waste FRP ships is increasing. It is expected that a large amount of waste FRP ships will be generated. Waste FRP ships are emerging as a social problem, such as the difficulty in preserving the marine environment. To improve this, a waste FRP ship melting process system has been developed. In order to construct an effective waste FRP ship processing system, it is necessary to study the treatment facilities location problem. In this paper, we suggest mathematical model to solve optimal location problem of waste FRP Ships and discuss on results by applying it to nine regions selected as candidates for treatment facilities.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.5
• /
• pp.10-19
• /
• 2000

소형어선이나 일반적인 활주형선형은 부분적인 형상 수정을 거치게 되면 3차원 곡면으로 이루어진 선체의 외판을 2차원 평면상에 전개하여 표현할 수 있다는 특성을 가지고 있다. 이러한 점을 활용하여 전개도형에 따라서 제작된 얇은 FRP 판재를 선 요소들로 정의된 형틀 상에서 변형시켜 선체의 형상을 만들고 그 내부에 추가로 FRP를 적층 함으로서 선체를 완성하는 방법을 제안하고자 한다.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.13
• /
• pp.72-75
• /
• 2004

이번 호에서는 연안어업의 소형어선을 4척 소개하기로 한다. 노르웨이의 FRP선망겸포경어선 OLAVSON호, 노르웨이의 FRP연승어선 GIVNA MARIE호, 스페인건조 프랑스에 등록된 강제연승어선 NATALIE CHANTAL 2호, 그리고 영국의 강제 트롤 ASHLON호이다. 이 어선은 길이가 짧아 측면에서 보면 작게 보이지만 폭과 깊이가 크기 때문에 국내 총 톤수로 보면 40톤에서 80톤급이다. 우리나라 어선으로 비교하면 근해어선의 규모이다.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.14
• /
• pp.30-43
• /
• 2004

국내 소형 어선은, 목선이 80% 이상, FRP선이 20%내외, 강선이 1% 이내를 차지하고 있다. 소형 목선과 FRP선은 크기가 작고 구성물질이 레이더 전자파를 반사키는 강도가 약하므로 중. 대형 선박에서 탐지하지 못하여 충돌에 의한 해난사고가 가장 큰 비율로 발생하고 있다.<중략>

• Journal of Korea Ship Safrty Technology Authority
• /
• v.15
• /
• pp.45-53
• /
• 2004

세계적으로 레저선박에서 가장 일반적인 선체의 재질은 아직까지 Fiberglass Reinforcement Plastic이다. 선체의 재질이 아직까지 FRP에서 알루미늄으로 변화하지 못하는 이유는 중, 소형 선박을 다량으로 제조할 때 FRP는 가장 효율적인 작업이 가능하고 경제성이 뛰어나며 선체의 외관에 제약이 크게 없는 재료이기 때문이다.<중략>

• Journal of Power System Engineering
• /
• v.13 no.6
• /
• pp.123-128
• /
• 2009

The effects of temperature and initial crack length on the impact fracture behavior for the side plate material of FRP ship were investigated. And the effects of the counterpart roughness and sliding distance on the volumetric wear of same material were investigated as well. Impact fracture toughness of GF/PE composites displayed maximum value when the temperature of specimen is room temperature and $50^{\circ}C$, and with decreasing the temperature of specimen, impact fracture toughness decreased. Impact fracture energy of GF/EP composites decreased with increasing the initial crack length of specimen, and this value decreased rapidly when the temperature of specimen is lowest, $-25^{\circ}C$. It is believed that sensitivity of notch on impact fracture energy were increased with decreasing the temperature of specimen. With increasing the sliding distance, the transition sliding distance, which displayed different aspect on the friction coefficient and the volumetric wear loss, were found out. Counterpart roughness had a big influence on the wear rate at running in period, however the effect of counterpart roughness became smaller with sliding speed increase in. Volumetric wear loss were increased with increasing the applied load and the counterpart roughness.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.2
• /
• pp.75-82
• /
• 2010

The economical efficiency and easy ship building have enabled to spread FRP ships in the shipbuilding field. As waste FRP ships have been thrown away at a river or within a harbour, this matter has become issues. For the improvement of this matter, the melting technique and system of waste FRP ships was developed. But, Decision making was required for a location plan of the melting system of waste FRP ships. It's recognized that the location decision of this system is difficult due to the dependence on technical, economical, environmental factors. In this paper, we survey the primary factors of location-economic, life-environment, infrastructure and make up a question for the experts. We also calculate the important weight and related weight using Fuzzy AHP, Limiting probability method and discuss on the calculation results on the proposed sites.

• Journal of Fisheries and Marine Sciences Education
• /
• v.12 no.1
• /
• pp.22-82
• /
• 2000

The ship hull construction materials of fishing boat has changed in order that wooden, steel, and fiber glass reinforced plastic(FRP). The fishing boat made from FRP has increased every year because that materials has proved excellent of the characteries for fishing boats construction members. Recently, FRP tend towards evasion for the pollution of air enviroment. Therefore. the materials of fishing boat construction must be exchanged by another one. Aluminium alloys must be recommended for fishing boats construction mateials because that is light weight and corrosion resisting in the sea water. Regulation of the standard of ship hull construction for aluminium alloys fishing boats did not enact laws in the interior now. Therefore, this regulation was studied by the following items. that is Rudder, Bottom construction, Side hull plate construction, Deck plate construction, piller. Water tight bulkhead, Deep tank, Fish tank, Stern construction, Superstructure, Deck house construction, Hatch, Engine room opening, Hatch opening, Bulwark, Welding and Rivet etc. A study on the regulation will be contributed to enact laws for fishing boat construction of aluminium alloys.