• Korean Journal of Veterinary Service
• /
• v.31 no.4
• /
• pp.505-519
• /
• 2008

For screening the appropriate field diagnostic techniques to failure of passive immunoglobulin transfer(FPT) in Korean-indigenous calves, 258 sera was examined by spectinophotometry for total protein(TP) and globulin(Glo), sodium sulfate precipitation test(SSPT), zinc sulfate turbidity test(ZSTT), and single radial immunodiffusion test(sRID). All calves aged within 6-week old. Morbidity and mortality to various diseases, mainly including enteric and respiratory disorders, were 18.9%(49) and 4.2%(11), respectively. FPT was 27,9%(72/258) when the cutoff point of TP was $4.5g/d{\ell}$ and among them the morbidity and mortality were 27.9% and 6.9%, respectively. FPT was 29.1%(75/258) when the cutoff point of Glo was $2.0g/d{\ell}$ and among them the morbidity and mortality were 29.0% and 6.9%, respectively. FPT was 13.1%(34/258) when the cutoff point of SSPT was 1+ and among them the morbidity and mortality were 67.6% and 23.5%, respectively. FPT was 19.7%(51/258) when the cutoff point of IgG with sRID was $1,000mg/d{\ell}$ and among them the morbidity and mortality were 41.1% and 11.7%, respectively. In addition, mean concentration of IgG with sRID tested was $2,150mg/d{\ell}$ at 3-day old but $1,100mg/d{\ell}$ at 9-days with $1,100mg/d{\ell}$. The results of the study were suggested that SSPT for FPT was the relatively reliable and convinient method for evaluating the immune status of calves(P<0.05).

• Nuclear Engineering and Technology
• /
• v.38 no.6
• /
• pp.535-550
• /
• 2006

The objectives of this paper are twofold to summarize the new findings and confirmed results from the Phebus FPT-1 experimental data and to report useful information to MELCOR users regarding the better use of MELCOR. For the core damage behavior, the early stage of a melt progression was predicted well; however, the late phase models, concerned with fuel dissolution, oxide cladding failure, fuel slumping, rubble debris heat up, effects of burn-up fuel, and so on, still showed limitations in MELCOR. For the fission product behavior, the comparison showed unexpected phenomena, various limitations, unresolved issues, and even absence of models. The issues summarized in this study have revealed the main areas where our endeavors need to be intensified in order to improve our understanding of severe accident phenomena. From the analysis of the Phebus FPT-1 test results, not only new core damage features, such as foaming or core expansion, but also possible new fission product release patterns due to effects from a high burn-up fuel have raised alternative challenging phenomena that should be solved in the next severe accident research phase.

• Nuclear Engineering and Technology
• /
• v.38 no.2
• /
• pp.163-174
• /
• 2006

The $Ph{\acute{e}}bus$ FP project is an international reactor safety project. Its main objective is to study the release, transport and retention of fission products in a severe accident of a light water reactor (LWR). The FPT4 test was performed with a fuel debris bed geometry, to look at late phase core degradation and the releases of low volatile fission products and actinides. Post Test Analyses results indicate that releases of noble gases (Xe, Kr) and high-volatile fission products (Cs, I) were nearly complete and comparable to those obtained during $Ph{\acute{e}}bus$ tests performed with a fuel bundle geometry (FPT1, FPT2). Volatile fission products such as Mo, Te, Rb, Sb were released significantly as in previous tests. Ba integral release was greater than that observed during FPT1. Release of Ru was comparable to that observed during FPT1 and FPT2. As in other $Ph{\acute{e}}bus$ tests, the Ru distribution suggests Ru volatilization followed by fast redeposition in the fuelled section. The similar release fraction for all lanthanides and fuel elements suggests the released fuel particles deposited onto the plenum surfaces. A blockage by molten material induced a steam by-pass which may explain some of the low releases. The revaporisation testing under different atmospheres (pure steam, $H_2/N_2$ and steam /$H_2$) and up to $1000^{\circ}C$ was performed on samples from the first upper plenum. These showed high releases of Cs for all the atmospheres tested. However, different kinetics of revaporisation were observed depending on the gas composition and temperature. Besides Cs, significant revaporisations of other elements were observed: e.g. Ag under reducing conditions, Cd and Sn in steam-containing atmospheres. Revaporisation of small amounts of fuel was also observed in pure steam atmosphere.

• Korean Journal of Veterinary Service
• /
• v.31 no.4
• /
• pp.533-546
• /
• 2008

The efficacy of bovine immune sera to correct the calves with failure of passive transfer(FPT) was evaluated. Immune sera were produced from 14 one-year-old Holstein cattle which were inoculated commercial combined viral vaccine, administered by the challenge of some main enteric or respiratory viruses, aseptically filtered and stored at $4^{\circ}C$ before used. After the treatment of bovine immune sera, Mean transfer factor($mg/d{\ell}$, of IgG administered/kg of body weight) was $5.46{\pm}2.74,\;11.17{\pm}1.27,\;1.40{\pm}0.21$ in K-IP, H-IP and K-IV group, respectively. The corrective effect of bovine immune sera to FPT calf without any clinical signs showed that intravenous route was more effective than intraperitoneal administration(P<0.01). FPT calves with severe signs were not effective response to the immunotherapy used and consequently died within 10 days after the treatment. Ten percentage of controls appeared the clinical signs including diarrhea. On the contrary, there were not any clinical signs in K-IP and H-IV group. There was significant increase of the neutralizing titer against bovine viral diarrhea virus and bovine coronavirus as well as of cell population including CD2, CD4, and monocyte in K-IP and H-IV group after the immunotherapy(P<0.05). Also, K-IP and H-IV group showed the successful correction to FPT within one week after the immunotherapy, but controls had kept the FPT two-four weeks even after the same treatment. Consequently, the results were suggesting that the bovine immune sera could be used the corrective tool to young calves with FPT.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.74.2-74.2
• /
• 2016

It is important to know how well observation errors are removed in the calibration process prior to ensuing scientific research. In mm-VLBI observations, a radio wave suffers from an atmospheric propagation delay due to the rapid change of atmospheric refraction. It makes phases of VLBI correlation output fluctuate rapidly, which essentially decreases the coherence of phases and reduces the integration time. Consequently, it is challenging to achieve a high signal-to-noise ratio and enhance the quality of scientific output. Among the causes of the atmospheric propagation delay, water vapor in the troposphere is the most decisive factor to affect phase errors in the high frequency range (> 10GHz). It is expected to have the non-dispersive characteristic that enables to introduce new calibration strategy, Frequency Phase Transfer (FPT). This new method utilizes low frequency phases to compensate phase errors in high frequency bands. In addition, Korean VLBI Network (KVN) which benefits from the simultaneous 4-channels (22/43/86/129 GHz) observations is ideal to probe FPT performance. In order to evaluate FPT performance of KVN, we present the results of FPT phase analysis and discuss its performance.

• The Journal of Korean Medicine
• /
• v.42 no.1
• /
• pp.59-74
• /
• 2021

Objectives: This study is to analyze Acupuncture Methods(鍼法) using Five Transport Points(五輸穴) and to consider the direction of development. Methods: This study focuses on Acupuncture Methods(鍼法) using Five Transport Points(五輸穴) that Five Phase Theory(五行學說) has been applied as a compound and it is designated Five Phase-Five Transport Points-Acupuncture Method(FPT Acupuncture Method, 五行五輸穴鍼法). Principles, Acupuncture Points(經穴), standards of diagnosis and treatment subjects of FPT Acupuncture Methods used in practices of Korean Medicine (韓醫學) were analyzed through updated literature. Next, the theoretical issues of FPT Acupuncture Methods regarding the composition of selecting exclusively on Five Transport Points(五輸穴) and targeted treatment subjects were investigated. Based upon the investigation, the future direction of development was studied. Results & Conclusions: Firstly, pattern identification and treatment of FPT Acupuncture Methods targeted mostly on Viscera and Bowels(臟腑). However, some showed the tendency to Five Phases Reductionism(五行 還元主義) which attempts to apply Five Phase Theory(五行學說) to symptoms that were not related to Viscera and Bowels(臟腑). Secondly, Five Transport Points(五輸穴) are theoretically related to 'Viscera and Bowels in Concept of Visceral Manifestation(臟象臟腑)'. Thirdly, when the cause of the symptoms exceeds the main therapeutic range of FPT Acupuncture Methods, it is effective to add Acupuncture Points(經穴) excluding Five Transport Points(五輸穴). And also, it is efficient to use Acupuncture Methods(鍼法) that is not based on principles of Five Phase Theory(五行學說). For the accomplishment, further researches on the approaches to apply basic Korean Medical principles such as Three Yin and Three Yang(三陰三陽) into Acupuncture Methods(鍼法) and Acupuncture Points(經穴) are necessary.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1520-1521
• /
• 2008

There are several ways to demonstrate white organic light emitting diodes (OLEDs) for displays and solid state lighting applications. Among these approaches are the stacked three primary or two complementary colors light-emitting layers, multiple-doped emissive layer, and excimer and exciplex emission [1-10]. We report on white phosphorescent excimer devices by using two light emitting materials based on platinum complexes. These devices showed a peak EQE of 15.7%, with an EQE of 14.5% (17 lm/W) at $500\;cd/m^2$, and a noticeable improvement in both the CIE coordinates (0.381, 0.401) and CRI (81). Devices with the structure ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 12% FPt (10 nm) /26 mCPy: 2% Pt-4 (15 nm)/BCP (40 nm)/CsF/Al [device 1], ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 2% Pt-4 (15 nm)/26 mCPy: 12% FPt (10 nm)/BCP (40 nm)/CsF/Al [device 2], and ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 2% Pt-4: 12% FPt (25 nm)/BCP (40 nm)/CsF/Al [device 3] were fabricated. In these cases, the emissive layer was either the double-layer of 26 mCPy:12% FPt and 15 nm 26 mCPy: 2% Pt-4, or the single layer of 26mCPy with simultaneous doping of Pt-4 and FPt. Device characterization indicates that the CIE coordinates/CRI of device 2 were (0.341, 0.394)/75, (0.295, 0.365)/70 at 5 V and 7 V, respectively. Significant change in EL spectra with the drive voltage was observed for device 2 indicating a shift in the carrier recombination zone, while relatively stable EL spectra was observed for device 1. This indicates a better charge trapping in Pt-4 doped layers [10]. On the other hand, device 3 having a single light-emitting layer (doped simultaneously) emitted a board spectrum combining emission from the Pt-4 monomer and FPt excimer. Moreover, excellent color stability independent of the drive voltage was observed in this case. The CIE coordinates/CRI at 4 V ($40\;cd/m^2$) and 7 V ($7100\;cd/m^2$) were (0.441, 0.421)/83 and (0.440, 0.427)/81, respectively. A balance in the EL spectra can be further obtained by lowering the doping ratio of FPt. In this regard, devices with FPt concentration of 8% (denoted as device 4) were fabricated and characterized. A shift in the CIE coordinates of device 4 from (0.441, 0.421) to (0.382, 0.401) was observed due to an increase in the emission intensity ratio of Pt-4 monomer to FPt excimer. It is worth noting that the CRI values remained above 80 for such device structure. Moreover, a noticeable stability in the EL spectra with respect to changing bias voltage was measured indicating a uniform region for exciton formation. A summary of device characteristics for all cases discussed above is shown in table 1. The forward light output in each case is approximately $500\;cd/m^2$. Other parameters listed are driving voltage (Bias), current density (J), external quantum efficiency (EQE), power efficiency (P.E.), luminous efficiency (cd/A), and CIE coordinates. To conclude, a highly efficient white phosphorescent excimer-based OLEDs made with two light-emitting platinum complexes and having a simple structure showed improved EL characteristics and color properties. The EQE of these devices at $500\;cd/m^2$ is 14.5% with a corresponding power efficiency of 17 lm/W, CIE coordinates of (0.382, 0.401), and CRI of 81.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.670-686
• /
• 1995

This paper provides an improvement on our previous study ［1］ for multi-fault diagnosis in real time in large-scale systems. In the method, fault propagation probability(FPP) and fault propagation time(FPT) in a fuzzy sense are additively used to describe the fault propagation model(FPM) in more practical manner. A modified fault diagnosis procedure is also given. This method is applied for diagnosis of the primary system in the Kori nuclear power plant unit 2 under a transient condition in case of unit value of FPP on each branch of the FPM.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.131-138
• /
• 2020

In accordance with huge demand for capital to meet the expansion of steel production, there are more and more steel companies who have officially listed their stocks in HOSE and HNX. One of the key issues in successful initial public offerings and seasonal offerings for these companies is how to make stocks of steel companies become more attractive in the eyes of investors. The purpose of this research is to analyze the determinants of share prices of listed steel companies in Vietnam. This study utilized macro-economic variables, ratios and indicators representing characteristics of steel industry collected from Quarter 1/2006 to Quarter 4/2019 in association with the panel data and the feasible generalized least square (FGLS) model to evaluate the degree of these factors on the share prices. The results of the research show that ROE, Cons_rate, and CO2_rate are three main factors affecting the share prices of listed steel companies. Among which, ROE and Cons_rate have a positive effect, while CO2_rate has a negative effect on the share prices of listed steel companies. It also confirms the relationship between the environmental factor, construction industry factor and the stock prices. This lays foundations for recommendations for the future policies towards environmental protection and sustainable development.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.138-151
• /
• 2022

Cladding ballooning and rupture are the important phenomena at the early stage of a severe accident. Most severe accident analysis codes determine the cladding rupture based on simple parameter models. In this paper, a FRTMB module was developed using the thermal-mechanical model to analyze the fuel mechanical behavior. The purpose is to judge the cladding rupture with the severe accident analysis code. The FRTMB module was integrated into the self-developed severe accident analysis code ISAA to simulate the PHEBUS FPT3 experiment. The predicted rupture time and temperature of the cladding were basically consistent with the measured values, which verified the correctness and effectiveness of the FRTMB module. The results showed that the rising of gas pressure in the fuel rod and high temperature led to cladding ballooning. Consequently, the cladding hoop strain exceeded the strain limit, and the cladding burst. The developed FRTMB module can be applied not only to rod-type fuel, but also to plate-type fuel and other types of reactor fuel rods. Moreover, the FRTMB module can improve the channel blockage model of ISAA code and make contributions to analyzing the effect of clad ballooning on transient and subsequent parts of core degradation.