• 설비공학논문집
• /
• 제16권6호
• /
• pp.522-529
• /
• 2004

In this study, external condensation heat transfer coefficients (HTCs) of flammable refrigerants of propylene, propane, isobutane, butane, DME, and HFC32 were measured on a horizontal plain tube, 26 fpi low fin tube, and Turbo-C tube. All data were taken at the temperature of 39$^{\circ}C$ with a wall subcooling of 3∼8$^{\circ}C$. Test results showed a typical trend that condensation HTCs of flammable refrigerants decrease with increasing wall subcooling. HFC32 had the highest HTCs among the tested refrigerants showing 44% higher HTCs than those of HCFC22 while DME showed 28% higher HTCs than those of HCFC22. HTCs of propylene and butane were similar to those of HCFC22 while those of propane and isobutane were similar to those of HFC134a. Based upon the tested data, Nusselt's equation is modified to predict the plain tube data within a deviation of 3%. For 26 fpi low fin tube, Beatty and Katz equation predicted the data within a deviation of 7.3% for all flammable refrigerants tested. The heat transfer enhancement factors for the 26 fpi low fin and Turbo-C tubes were 4.6∼5.7 and 4.7∼6.9 respectively for the refrigerants tested indicating that the performance of Turbo-C tube is the best among the tubes tested.

• 수산해양기술연구
• /
• 제43권3호
• /
• pp.176-182
• /
• 2007

Fishing power, which means performance of fishing vessel or catchability of fishing gear, can explain using by fishing power index(FPI) to compare fishery efficiency among uniformity types of fishery that work during the fixed period in specific fishing ground. This research analyzed on their fishing power and catchability using comparing each sampled vessels of coastal trap fishery for common octopus. The results showed that they were no difference in amount of used trap and immersed time etc. in CPUE among sampled vessels, and had no correlation of catch production due to vessel's tonnage. Most vessel's FPI estimates but 3 vessels were higher than the averaged, and showed similar fishing power in general. And then, CPUE and FPI showed that 4 to 5 tonnage vessels would be superior to another, 4 tonnage vessels had also good catchability. Therefore, we estimated that 4 tonnage vessels had the most efficiency work for coastal trap fishery for common octopus.

• Geomechanics and Engineering
• /
• 제22권6호
• /
• pp.489-496
• /
• 2020

This study proposes a new empirical model to effectively predict the excavation performance of a shield tunnel boring machine (TBM). The TBM performance is affected by the geological and geotechnical characteristics as well as the machine parameters of TBM. Field penetration index (FPI) is correlated with rock mass parameters to analyze the effective geotechnical parameters influencing the TBM performance. The result shows that RMR has a more dominant impact on the TBM performance than UCS and RQD. RMR also shows a significant relationship with the specific energy, which is defined as the energy required for excavating the unit volume of rock. Therefore, the specific energy can be used as an indicator of the mechanical efficiency of TBM. Based on these relationships with RMR, this study suggests an empirical performance prediction model to predict FPI, which can be derived from the correlation between the specific energy and RMR.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1807-1813
• /
• 2018

In this paper, the fault line selection and location problems of single line-to-ground (SLG) fault in distribution network are addressed. Firstly, the adaptive filtering property for empirical mode decomposition is formulated. Then in view of the different characteristics showed by the intrinsic mode functions(IMF) under different fault inception angles obtained by empirical mode decomposition, the sign of peak value about the low-frequency IMF and the capacitance transient energy is chosen as the fault line selection criteria according to the different proportion occupied by the low-frequency components. Finally, the fault location is determined based upon the comparison result with adjacent fault passage indicators' (FPI) waveform on the strength of the interaction between the distribution terminal unit(DTU) and the FPI. Moreover, the logic nodes regarding to fault line selection and location are newly expanded according to IEC61850, which also provides reference to acquaint the DTU or FPI's function and monitoring. The simulation results validate the effectiveness of the proposed fault line selection and location methods.

• 에너지공학
• /
• 제25권1호
• /
• pp.100-107
• /
• 2016

본 연구에서는 예혼합 화염과 비예혼합 화염을 동시에 구현하는 하이브리드 연소시스템에 배기가스 재순환 방법(FI-EGR and FPI-EGR)을 적용하여 공해물질 저감 효과를 확인하였다. 그 결과, 배기가스 재순환을 적용한 경우 상당량의 NOx 배출지수가 감소하는 것을 확인 할 수 있었으며, 추가적으로 배기가스 재순환을 적용한 하이브리드 연소시스템의 배출성능이 동일한 배기가스 재순환율을 가지는 비예혼합 화염의 배출성능보다 우수함을 확인하였다. 특히, 비예혼합 화염과 예혼합 화염의 비율이 50: 50인 하이브리드 연소시스템의 연료 측에 25% 까지 배기가스를 재순환 시킬 경우(FI-EGR), 배기가스 재순환을 적용하지 않은 비예혼합 화염에 비해 NOx 배출지수가 59% 저감되는 것을 확인하였으며, 혼합비율이 70:30인 하이브리드 연소시스템의 예혼합기와 연료측에 15%까지 배기가스를 재순환 시킬 경우(FPI-EGR), 배기가스를 재순환하지 않은 하이브리드 화염에 비해 NOx 배출지수가 48% 저감되는 것을 확인하였다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.220-223
• /
• 2001

This study was carried out to developed that appraisement model of Potential Productivity Index (PPI). PPI model was used Farmland Productivity Index(FPI) and Labor Productivity Index(LPI) by GIS, and PPI model applied to farm land consolidation region which has been completed recently. FPI was determined by overlapping Poly Grid of the soil properties at the analyzed project region. LPI was estimated by addition productive wages ratio of total direct productive cost. Addition productive wages was determined by GIS Network analysis of working distance between farm house to paddy and each paddy. PPI variation of each the analyzed paddy of Masu and Weoncheon region was $0.967{\sim}0.712,\;0.986{\sim}0.780$ respectively, and could be showed relative largely PPI value. PPI will provide basic element for large scaling and gathering of farm land and a substitute lot of farm land consolidation, and will be maximize productivity of paddy.

• Journal of Information Display
• /
• 제12권4호
• /
• pp.223-227
• /
• 2011

Electrophosphorescent devices with ionomer-type hole transport layers were investigated. On top of the 3,4-ethylenedioxy thiophene:poly(4-styrene sulfonate) [PEDOT:PSS] structures, fluoropolymer interfacial layers (FPIs) with different side chain lengths were introduced. Both for the PEDOT:PSS/FPI (layered) and PEDOT:PSS (mixed) structures with soluble phosphorescent emitters, the short-side-chain FPIs showed higher efficiency. The difference in the electrical properties of the two FPIs for bipolar (light-emitting) devices was not clear, but the hole-only device clearly showed the favored hole injection at the PEDOT:PSS/FPI structure with a shorter side chain, a copolymer of tetrafluoroethylene and sulfonyl fluoride vinyl ether.

• 한국식품조리과학회지
• /
• 제17권4호
• /
• pp.380-390
• /
• 2001

Utilization practice of garlic and seasonings in industry foodservice was surveyed by questionnaire. Statistical data analysis was performed with SAS package program in order to have frequencies, means, t-test, ANOVA and Duncan's multiple range test. The results of this study can be summarized as follows; The mean value of Food Processing Index(FPI) score for purchased vegetable and seasonings is 3.5 which indicates the prepreparation is between partially preprepared and completely preprepared. The garlic was mainly purchased from brokers(51.0%), on a daily basis(58.8%) and peeled-form(74.5%). The average purchased amount is 6.66㎏ at a time. The unit price of the garlic makes significant differences(p＜0.05) by the scale and location of foodservice establishments. As for the storage method and Period, in room temperature, no storage(2.1%) and for one day(2.1%) and in refrigeration, for one day(39.6%) and fer three days(18.7%).

• 한국정보처리학회논문지
• /
• 제4권5호
• /
• pp.1371-1379
• /
• 1997

본 논문에서는 순차화로에서의 시험 불가능 고장을 찾는 새로운 알고리즘을 제시 하였다. 이 알고리즘에서는 초기화가 불가능한 플플롭을 먼저 찾으면서 이 과정에서 이 플립플롭의 초기화를 막는 고장, FPI를 찾고 이 고장의 전파 경로를 검색한다. 또한 이 알고리즘을 ISCA889 벤츠마크 회로를 대상으로 적용하여 시험 불가능한 FPI의 갯수를 제시하였다. 테스트 생성에 소요되는 시간의 대부분이 시험 불가능고장의 검출에 사용 되는 것을 고려할 때, 이 알고리즘을 테스트 생성기의 전처리 과정으로 사용하면, 테스트 생성기의 효율을 크게 높일 것으로 기대된다.

• 대한전자공학회논문지TC
• /
• 제37권1호
• /
• pp.1-11
• /
• 2000

본 논문에서는 다중 반송파 부호 분할 다원 접속 (multi-carrier-code division multiple access; MC-CDMA) 시스템 내의 고출력 증폭기에 의해 발생하는 비선형 왜곡의 보상을 위한 전치왜곡기를 제안한다. 제안된 방법은 contraction mapping 정리와 이에 따른 고정점 반복에 기반하고 있다. 우리가 이미 다른 논문에서 제안하였던 고정점 반복 기반의 전치왜곡기가 복소수 변조 신호 자체에 적용되는 것에 반해, 여기서 제안하는 전치왜곡기는 변조 신호의 진폭에 고정점 반복을 적용하여 실수 연산을 수행하므로써 계산량을 감소시킨다. 송신기에서 traveling wave tube amplifier를 고출력 증폭기로 사용하고, BPSK 변조와 64개의 부반송파를 이용하는 동기식 MC-CDMA 기저대역 시스템에 대한 컴퓨터 시뮬레이션 결과, 제안된 전치왜곡기를 사용하는 경우 그렇지 않은 경우에 비해 비트오율 및 total degradation의 측면에서 월등한 성능 향상이 가능함을 알 수 있었다. 또한, 작은 output back-off 레벨에 대해 제안된 전치왜곡기는 복소수 연산을 수행하는 기존의 공점점 반복 기반의 전치왜곡기보다 우수한 성능을 보임을 역시 확인하였다.