• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.416-420
• /
• 1999

This paper describes a 32-bit RISC processor, which has instruction level compatibility with the ARM7 microprocessor. The processor is fully synthesizable, and its performance is evaluated based on 0.35-${\mu}{\textrm}{m}$ CMOS library. This paper focuses on the implementation of the processor and the reliable verification strategy ensuring the complete instruction level compatibility. The processor has successfully verified using a FPGA chip.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.2
• /
• pp.201-211
• /
• 2012

This paper addresses a Full Disk Encryption hardware processor for SATA HDD in a single FPGA design, and shows its experimental result using an FPGA board. The proposed processor mainly consists of two blocks: the first block processes XTS-AES block cipher which is the IEEE P1619 standard of storage media encryption and the second block executes the interface between SATA Host (PC) and Device (HDD). To minimize the performance degradation, we designed the XTS-AES block with the 4-stage pipelined structure which can process a 128-bit block per 4 clock cycles and has 4.8Gbps (max) performance. Also, we implemented the proposed design with Xilinx ML507 FPGA board and our experiment showed 140MB/sec read/write speed in Windows XP 32-bit and a SATA II HDD. This performance is almost equivalent with the speed of the direct SATA connection without FDE devices, hence our proposed processor is very suitable for SATA HDD Full Disk Encryption environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1066-1070
• /
• 2003

Recently technologies have created new principle and theory but the PID control system remains its popularity as the PID controller contains simple structure, including maintenance and parameter adjustment being so simple. Thus, this paper proposes auto tune PID by fuzzy logic controller based on FPGA which to achieve real time and small size circuit board. The digital PID controller design to consist of analog to digital converter which use chip TDA8763AM/3 (10 bit high-speed low power ADC), digital to analog converter which use two chip DAC08 (8 bit digital to analog converters) and fuzzy logic tune digital PID processor embedded on chip FPGA XC2S50-5tq-144. The digital PID processor was designed by fundamental PID equation which architectures including multiplier, adder, subtracter and some other logic gate. The fuzzy logic tune digital PID was designed by look up table (LUT) method which data storage into ROM refer from trial and error process. The digital PID processor verified behavior by the application program ModelSimXE. The result of simulation when input is units step and vary controller gain ($K_p$, $K_i$ and $K_d$) are similarity with theory of PID and maximum execution time is 150 ns/action at frequency are 30 MHz. The fuzzy logic tune digital PID controller based on FPGA was verified by control model of level control system which can control level into model are correctly and rapidly. Finally, this design use small size circuit board and very faster than computer and microcontroller.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2380-2388
• /
• 2015

A hardware implementation of MOD(moving object detection) algorithm using EGML(effective Gaussian mixture learning)- based background subtraction to detect moving objects in video is described. Some approximations of EGML calculations are applied to reduce hardware complexity, and pipelining technique is adopted to improve operating speed. The MOD processor designed in Verilog-HDL has been verified by FPGA-in-the-loop verification using MATLAB/Simulink. The MOD processor has 2,218 slices on the Virtex5-XC5VSX95T FPGA device and its throughput is 102 MSamples/s at 102 MHz clock frequency. Evaluation results of the MOD processor for 12 images in the IEEE CDW-2012 dataset show that the average recall value is 0.7631, the average precision value is 0.7778 and the average F-measure value is 0.7535.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.223-225
• /
• 2007

본 논문에서는 FPGA(Field Programmable Gate Array) 기반의 전류 제어기를 설계하고 구현하였다. 기존의 DSP (Digital Signal Processor) 기반의 전류 제어기는 알고리즘 연산으로 인해 일반적으로 한 샘플링의 디지털 시지연이 발생한다. 반면에, FPGA 기반의 전류제어기는 FPGA의 높은 연산 능력을 이용하여, 알고리즘 연산에 필요한 시간을 감소시킬 수 있다. 이는 시지연이 물리적으로 줄기 때문에, 어떠한 시지연 보상 알고리즘 없이 전류 제어기의 대역폭을 향상시킬 수 있다. 구현된 FPGA 기반의 전류 제어기의 성능은 실험을 통해 검증되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.706-712
• /
• 2006

In this letter, we propose a compact CORDIC processor for implementation of carrier frequency synchronization block in an OFDM (Orthogonal Frequency Division Multiplexing) system. The compact CORDIC processor is proposed by using inherenct properties of an OFDM system for estimation and compensation of carrier frequency offset, and is composed of a compact CORDIC preprocessor and a compact CORDIC processor. The compact CORDIC preprocessor plays a role of normalizing input signal efficiently, and the compact CORDIC processor is proposed to perform the vectoring mode and rotational mode jointly in CORDIC operation for carrier frequency synchronization. It is shown by FPGA implementation that the proposed compact CORDIC processor can achieve better performance with a significantly reduced hardware complexity than the conventional CORDIC approach.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.3
• /
• pp.362-367
• /
• 2010

In this paper, we describe implementation of FPGA-based Nios II embedded processor system and linux device driver for image monitoring system which is supplement weakness for fixed surveillance area of existing CCTV system and by manual operation of the camera's moving. Altera Nios II processor 8.0 is supported MMU which is stable and efficient managed memory. We designed the image monitoring and control system by using Altera Nios II soft-core processor system which is flexible in various application and excellent adaptability. By implementation of camera device driver and VGA decvice driver for Linux-based Nios II system, we implemented image serveillance system for Nios II embedded processor system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.56-70
• /
• 2010

Rendering technique generating 2 dimensional image to give reality and high performance graphical processor for efficient processing of massive data are necessary to support realistic 3 dimensional graphical image. Recently, graphical hardwares have evolved rapidly. This enables high quality rendering effect that we were unable to process in realtime. Improving shading technique enabled us to render realistic images but still much time is required for this process. Multiple operational units are being integrated in a graphical processor for effective floating point operation using massive data to process almost real looking images. In this paper, we have designed and implemented a special functional unit to support high quality 3 dimensional computer graphic image on programmable integrated shader processor. We have done evaluation through functional level simulation of designed special functional unit. Hardware resource usage rate and execution speed are measured implementing directly on FPGA Virtex-4(xc4vlx200).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.600-602
• /
• 2021

With the development of the mobile industry and growing interest in artificial intelligence (AI) technology, a lot of research for AI processors which applicable to embedded systems is under study. When implementing AI to embedded systems, the design should be considered the restriction of resource and power consumption. Moreover, it is efficient to include a dedicated hardware accelerator in order to complement the low computational performance of the embedded system. In this paper, we propose an stand-alone embedded AI processor. The proposed AI processor includes a hardware accelerator that is dedicated to the distance-based AI algorithm and a general-purpose MCU that supports flexible programmability for application to various embedded systems. The AI processor was designed with Verilog HDL and verified by implementing on Field Programmable Gate Array (FPGA).

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.651-654
• /
• 2005

In this paper, we designed ECC(Elliptic Curve Cryptographic) Processor with Bus-splitting mothod for embedded SoC. ECC SIP is designed by VHDL RTL modeling, and implemented reusably through the procedure of logic synthesis, simulation and FPGA verification. To communicate with ARM9 core and SIP, we designed SIP bus functional model according to AMBA AHB specification. The design of ECC Processor for platform-based SoC is implemented using the design kit which is composed of many devices such as ARM9 RISC core, memory, UART, interrupt controller, FPGA and so on. We performed software design on the ARM9 core for SIP and peripherals control, memory address mapping and so on.