• 한국멀티미디어학회논문지
• /
• 제10권10호
• /
• pp.1271-1283
• /
• 2007

평판 디스플레이(FPD)의 결함 검출은 패널 영상의 불균일한 휘도 변화로 인해 정확한 결함 검출이 어렵다. 본 논문은 FPD 패널 영상의 휘도변화를 B-스플라인 표면으로 근사화하고, 이로부터 다양한 결함을 검출하는 방법을 제안한다. B-스플라인 표면 근사화시 잡음 및 결함에 해당하는 고주파 부분을 제외하고, 불균일 휘도 변화에 해당하는 배경부분만으로 구성하기 위해, 웨이브릿 변환 후 저주파대역만을 이용한다. 이는 B-스프라인 표면 근사화의 단점인 시간 소모를 획기적으로 줄일 뿐 아니라, 정확성을 향상시키는 결과를 가져온다. 최소의 부대역에서 근사화된 영상은 웨이브릿 합성 과정을 거쳐 원영상의 크기로 재구성되고, 원 영상에서 이를 뺀 차영상이 바로 불균일 휘도의 배경을 보상한 평평한 영상이 된다. 따라서 결과 영상에 단순 문턱치를 이용하여 결함 영역을 쉽게 검출할 수 있으며, 거짓 결함을 제거하기 위해 블랍 해석이 후처리로서 수행된다 또한 인라인 시스템에 적용하기 위해 웨이브릿 변환을 리프팅 기반의 알고리즘으로 구현하여 필름 같은 대용량의 데이터를 고속으로 처리할 수 있게 함으로써, 처리 시간을 크게 감소 시켰다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.757-761
• /
• 2004

Flat Panel Display (FPD) application of Television (TV) application is booming. Liquid Crystal Display (LCD) is forecasted to play a dominant role for TV application in next years. We review in this presentation LC material development for LCD TV application.

• 반도체디스플레이기술학회지
• /
• 제3권4호
• /
• pp.1-4
• /
• 2004

21세기에 접어들면서 Digital시험방송의 시작과 다양한 Contents의 유입으로 평판디스플레이 (Flat Panel Display)에 관한 관심과 수요가 증가하고 있다. 이 중 PDP는 90년대 후반부터 양산 및 개발을 시작하여 현재는 40 inch에서 60 inch 화면 크기의 제품을 시장에서 구입할 수 있으며, 03년도에는 80 inch 크기의 Proto-type Model을 공개한 바 있다. PDP는 40 inch 이상의 대면적 구현이 용이하다는 점, CRT와 동등 수준의 화상 구현이 가능하다는 점, 제조공법이 간단하고 제조원가가 저렴하다는 점 등을 특징으로 시장을 확대하고 있으나, 좀 더 대중적인 디스플레이가 되기 위해서는 고휘도 및 고효율화, 화질개선 그리고 저가격화 등과 같은 과제를 해결하여야 한다. 본 논문에서는 PDP의 개발역사 및 시장현황, 구조 및 구동 방법 그리고 해결과제 및 전망에 대해서 포괄적으로 살펴보기로 한다.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 1999년도 추계학술발표대회 논문개요집
• /
• pp.48-49
• /
• 1999

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.911-913
• /
• 2008

In this work, nonvolatile memory (NVM) devices for system on panel of flat panel display (FPD) were fabricated using low temperature polycrystalline silicon (LTPS) thin film transistor (TFT) technology with an oxide-nitride-oxynitride (ONOn) stack structure on glass. The results demonstrate that the NVM devices fabricated using the ONOn stack structure on glass have suitable switching characteristics for data storage with a low operating voltage, a threshold voltage window of more than 1.8 V between the programming and erasing (P/E) states after 10 years and its initial threshold voltage window (${\Delta}V_{TH}$) after $10^5$ P/E cycles.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.71-76
• /
• 2009

The clean non-contact type conveyor system for vertical transfer of large size FPD(Flat Panel Display) glasses has been installed at FPD production line just since a few years ago. The most important part of the conveyor is the 3 axis permanent magnet rollers faced orthogonally in pairs. However, the systematic design method about it has not been proposed yet. In this paper, we studied a design analysis for determining geometrical parameters of the magnetic roller by using a commercial FEM tool of the 3D Maxwell. Through a series of simulation, we obtained the relationship of several geometrical parameters affecting the torque of the conveyor.

• 정보화사회
• /
• 통권183호
• /
• pp.29-29
• /
• 2006

"결국 풀(Full) HD 컨텐츠를 잘 표현할 수 있는 디바이스가 시장을 선도해 나아갈 것입니다." 최근 일본 요코하마에서 개최된 FPD International2006(Flat Panel Display International 2006)에서 '디스플레이 진화를 위한 기술 혁신(Technology Innovation for Display Evolution)'이라는 제목의 연설을 한 삼성전자 LCD총괄 석준형 부사장의 미래전망이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.126-131
• /
• 2004

The popularity of flat-panel display(FPD), including plasma display panel(PDP) and liquid-crystal display(LCD), has given rise to the need to streamline their production. In these days, PDP is one of the most popular display devices because of its expansion of manufacturing process and simplicity. Bus electrodes, sustain electrodes, barrier ribs and RGB phosphors are patterned on PDP panel to display an image. Since a minute damage on the pattern can cause a serious defect to display, it is important to inspect the pattern precisely. In this paper, an automatic inspection system of repeated pattern in PDP panel has been introduced to find the defect, such as open, short, dirt, island, and so on. And the inspection system has been operated in the mass production line of PDP.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.389-392
• /
• 2005

In the maskless photolithography based on the Digital Micromirror Device (DMD) by Texas Instruments Inc. (TI), the micromirror array works as a virtual photomask to write patterns directly onto Flat Panel Display (FPD) at high speed with low cost. However, it is neither simple to generate region-based patterns for the micromirror array nor easy to deliver sequences of patterns for the micromirror controller. Moreover, the quality of lithography yields the precise synchronization between generating sequence of patterns and irradiation rate off micromirrors. In this study, the region-based pattern generating system for maskless photolithography is devised. To verify salient features of devised functionalities, the prototype system is implemented and the system is evaluated with actual DMD based photolithography. The results show that proposed pattern generating method is proper and reliable. Moreover, the devised region-based pattern generating system is robust and precise enough to handle any possible user specified mandate and to achieve the quality of photolithography required by FPD manufacturer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.913-918
• /
• 2005

It is expected that the inkjet technology offers prospect for reliable and low cost manufacturing of FPD (Flat Panel Display). This inkjet technology also offers a more simplified manufacturing process for various part of the FPD than conventional process. For example, recently the novel manufacturing processes of color filter (C/F) in LCD, or RGB patterning in OLED by inkjet printing method have been developed. This elaborates will be considered as the precious point of manufacturing process for the mass production of enlarged-display panel with a low price. On this point of view, we would like to review the status of inkjet technology in FPD, with some results on forming micro line by inkjet patterning of suspension type silver nano ink as below. We have studied the inkjet patterning of synthesized aqueous silver nano-sol on interface-controlled ITO glass substrate. Furthermore, we designed the conductive ink for direct inkjet patterning on bare ITO glass substrate. The first, the highly concentrated polymeric dispersant-assisted silver nano sol was prepared. The high concentration of batch-synthesized silver nano sol was possible to 40 wt%. At the same time the particle size of silver nanoparticles was below $10{\sim}20nm$. The second, the synthesized silver nano sol was inkjet - patterned on ITO glass substrate. The connectivity and width of fine line depended largely on the wettability of silver nano sol on ITO glass substrate, which was controlled by surfactant. The relationship was understood by wetting angle. The line of silver electrode as fine as $50{\sim}100\;{\mu}m$ was successfully formed on ITO glass substrate. The last, the direct inkjet-patternable silver nano sol on bare ITO glass substrate was designed also.