• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.746-752
• /
• 2022

Kiribati, a South Pacific island, and its surrounding countries are gradually submerging to rising sea levels. The sea level continues to change according to the degree of thermal expansion of glaciers and seawater that decreases with increase in temperature. Global warming affects both the amount and volume of seawater, thus increasing sea level. Tidal phenomena occur twice a day to the attraction of celestial bodies such as the moon and the sun. The moon changes the angle of orbiting surface with the Earth equator every 18.6 years, and the magnitude of the tidal force changes depending on the distance between the Earth equator and the moon orbital surface. The University of Hawaii Sea Level Center selected Tarawa, Christmas, Kanton of Kiribati,, Lautoka, Suva of Fiji,Funafuti of Tuvalu, Nuk1u'alofa of Tonga, and Port Vila of Vanuatu. When comparing tide levels for each year for 19 years, the focus was on checking the change in sleep to Tide levels, and rising sea levels was the effect of Tide levels. The highest astronomical tides (HAT) and lowest astronomical tides (LAT) were identified as Tarawa 297.0, 50.8 cm, Christmas 123.8, 19.9 cm, Kanton 173.7, 39.9 cm, Lautoka 240.7, 11.3 cm, Funafuti 328.6, 98.4 cm, Nuk1u'alofa 188.8, 15.5 cm, Port Vila 161.5, -0.5cm, respectively. The Sea level rising speed was Tarawa 3.1 mm/year, Christmas -1.0 mm/year, Kanton 1.6 mm/year, Lautoka 3.1 mm/year, Suva 7.4 mm/year, Funafuti 1.4 mm/year, Nuk1u'alofa 4.2 mm/year, and Port Vila -1.2 mm/year, respectively

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.65-74
• /
• 2023

This study compared the surface roughness and microbial adhesion characteristics of Omnichroma, a novel composite resin developed using "smart chromatic technology", with those of two other conventional composite resins with different filler compositions. A total of 144 specimens were fabricated using 3 types of composite resins: Omnichroma (nano-spherical), Filtek Z350XT (nanofill), and Tetric N-Ceram (nanohybrid) and, divided into 3 groups of 48. Finishing was performed using tungsten carbide burs. Specimens were then divided into 3 subgroups using different polishing methods: Control, SofLex, and PoGo. Surface roughness was analyzed quantitatively and qualitatively using an atomic force microscope and a scanning electron microscope. Microbial adhesion was assessed by culturing Streptococcus mutans on the specimens for 24 hours and then measuring colony-forming units attached to the upper surface. The surface roughness (Ra) of Omnichroma was 0.123 ㎛ after finishing, and it exhibited a smooth surface compared to the other resins. However, after polishing, there were no significant differences in the surface roughness between the three composite groups, regardless of the polishing methods. The surfaces of the Control subgroups were significantly rougher than those of the SofLex subgroups in all 3 composite groups. However, except for Tetric N-Ceram, there were no significant differences between the Control and PoGo subgroups in the other composite groups. Microbial adhesion assessment showed no significant differences between any of the 3 composite resin subgroups; however, Omnichroma exhibited higher microbial adhesion than the other two composites. No significant correlation was observed between surface roughness and microbial adhesion.

• The Korean Journal of Mycology
• /
• v.51 no.2
• /
• pp.81-90
• /
• 2023

The cultivation method of shiitake is divided into two methods: log cultivation and sawdust cultivation. Recently, the importance of sawdust cultivation has been highlighted due to problems such as environmental problems, rising labor costs, and a reduced labor force. Among the 24 Sawdust-cultivated Lentinula edodes cultivars in Korea stored by the National Institute of Forest Science, this study was conducted to select excellent cultivars under the sawdust block cultivation method. After inoculation, the sawdust mediums were cultured for 100 days (60 days in dark and then 40 days in light), and only Sanjo 712ho sprouted the primordia on the 10^th day of light culture (total 70 days of cultivation). As a result of cultivation, the average total yield of the 24 cultivars were 1,816 g and Sanjo 712ho was 2,267 g. The fruiting body yield was the highest in Sanjo 713ho with 3,443 g followed by Sanjo 710ho (3,355 g). Sanlim 10ho, Sansanhyang, and Sanjo 716ho showed low production with 174, 238, and 214 g, respectively. As a result of investigating the morphological characteristics of the fruit bodies, the fresh weight of Sansanhyang and Bambithyang was about twice as heavy as the overall average, and Sulbaekhyang was about twice as light. Bambithyang was the largest and longest in diameter and length of the stipe, and the thickness of the stem was the thickest in Sanjo 716ho. As for the hardness of pileus, Bambithyang showed the highest value at 1,276 g/5 mm, and Sanjo 711ho showed the lowest value at 542 g/5 mm. In summary, Bambithyang showed the best fruiting body characteristics and Sanjo 713ho showed the highest yield in the sawdust block cultivation method. This study, the cultivar with shortened cultivation periods and cultivars with excellent morphological characteristics and high yields.

• The Journal of Korean Philosophical History
• /
• no.27
• /
• pp.197-222
• /
• 2009

The Reform Movement(戊戌變法) of 1898 was a boundary tablet of modern history of science and technology which inherited the past and ushered in the future. Kang Youwei(康有爲), as a leader, his scientific thoughts opened up the way of Chinese enlightenity campaign and pushed the development of Chinese modem science and had an important position in modem history of scientific thoughts. The dissertation analyses the source, establishment and content of Kang Youwei. Kang Youwei developed the useful and discarded the useless of the view of implement science held by the Westernized Party, undertook a deep and throughout thinking on the nature of science, had cognition of scientific methods and spirit, by which he criticized negative proneness of ancient Chinese views of science. He put forwards a series of practical suggestions on political reform that provided a solid guarantee and support in system for scientific development. Kang Youwei rooted in the soil of Chinese traditional academic culture, but also western learning in modern western civilization. Kang go through Westernization Movement since the in-depth study of Western natural and inevitable outcome of the social sciences, are giving to science and technology. Although he was originally of Western "science" has a lot of misunderstandings and prejudices, but these shallow hazy perceptual knowledge, his view of science which constitutes the basis of the formation. In the course of scientific inquiry, Kang has begun to explore the essence of scientific development. He has a gut feeling that behind the scientific discovery of the existence of a force, which is the scientific truth and is used to grasp the scientific method. After contact with the Western world, with the traditional "Heaven(天)", and modern Chinese intellectuals began to "axiom(公理)" to recover his traditional "Heaven" of the new understanding is reflected mainly in "Zhutianjiang(諸天講)". "Zhutianjiang" is the Kang Yuwei in the absorption of traditional astronomy knowledge base, will the traditional arithmetic, as well as Buddhism and the West since the twentieth century, new knowledge of astronomy combines written. Kang while recognizing that scientific instruments, is nothing more than an extension of the role of the human senses and make the "Dao(道)" is more clear, but the "artifacts(器物)" caused by the inherent limitations of the limited nature of human knowledge, which is "Heaven" boundless nature of the broad terms, refused to concede defeat to. In reality, the activities of political reform, he gradually recognize this real-world helpless, and he recognized that the real world to achieve common ground of social ideal is impossible, so he chose comfort in life that people really get a stage of "Tianyou(天遊)". This is the cause that his writing "Datongshu(大同書)", at the same time, followed by writing "Zhutianjiang" talk "Tianyou".

• Journal of International Area Studies (JIAS)
• /
• v.14 no.1
• /
• pp.277-308
• /
• 2010

Since the globalization, many changes are occurring in our society. Multicultural phenonmenon in the society is becoming one of our major concern in the Korean society. Thus, this study is focusing on the multicultural phenomenon that we are facing since the globalization in Korea. No doubt that immigration is a growing force influencing the demographics of Korea. Since the mid-1990s, immigrant children and children from mixed marriage have become the fastest growing and the most extraordinarily diverse segment of Korea's child population. Until the recent past, Korea's major social attention has focused on adult immigrants to the neglect of their offspring, creating a profound gap between the strategic importance of the new second generation and the knowledge about its socioeconomic circumstances. In other words, there is a significant lack of studies on children of migrant, particularly from the Muslim background living in Korea. International marriage has grown rapidly in Korea since the late 1990s, and this phenomenon is especially common in rural farming communities. Most brides come from China, followed by Vietnam and other southeast Asian countries. However, there are certain number of Muslim bride coming to Korea. There are about 100 thousand muslim peoples living in Korean society. Among them 2.92% are Muslim immigrants' intermarriage with the Koreans. As a result, there are growing number of muslim brides and bridegroom settling in Korea, which would eventually create muslim families in growing korean multicultural societies. This study specify its research on the muslim mixed family by focusing on the offsprings of the muslim background. Our research team has created the new term on such research subject by using Koslim. Koslim is a 1.5 and 2^nd generation from the Muslim back ground family living in Korea. Thus, the objective of this study is to examine the awareness and the perception of Koslim by the Korean mainstream people. By doing so, it can analyze the general attitude of Koreans towards the Koslim people. In this sense this study intends to play a groundwork to promote successful coexistence between Korean and Koslim. It is anticipated that this research can lay the basis for Koreans to have more open and tolerant attitude towards our new members of society that is increasing everyday.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.57-71
• /
• 2015

This study was conducted to develop the fertigation system with a peristaltic hose pump and brushless DC motor. The fertigation system was consisted of sensor, main controller, motor control unit, peristaltic pump, water supply pump, control panel, and filter. The peristaltic pump discharges liquid by squeezing the tube with rollers. Rollers attached to the external circumference of the rotor compresses the flexible tube. The fluid is contained within a flexible tube fitted inside a circular pump casing. The developed fertigation system has no mixing tank but instead injects directly a concentrated nutrient solution into a water supply pipe. The revolution speed of the peristaltic pump is controlled by PWM (Pulse width modulation) method. When the revolution speed of the peristaltic pump was 300rpm, the flow rate of the 3.2, 4.8, 6.3mm diameter tube was 202, 530, 857mL/min, respectively. As increasing revolution speed, the flow rate of the peristaltic pump linearly increased. As the inner diameter of a tube larger, a slope of graph is more steep. Flow rate of three roller was more than that of four roller. Flow rate of a norprene tube with good restoring force was more than that of a pharmed tube. As EC sensor probe was installed in direct piping in comparison with bypass piping showed good performance. After starting the system, it took 16~17 seconds to stabilize EC. The maximum value of EC was 1.44~1.7dS/m at a setting value of 1.4dS/m. The developed fertigation system showed ±0.06dS/m deviation from the setting value of EC. In field test, Cucumber plants generally showed good growth. From these findings, this fertigation system can be appropriately suitable for fertigation culture for crops.

• Korean Journal of Social Welfare Studies
• /
• v.42 no.3
• /
• pp.291-327
• /
• 2011

The purpose of this study is to classify the type of retirement process among the mature-aged in Korea. The study used the panel data from Korean Labor Panel (year2~6) for the classification of retirement process through Optimal Matching and Cluster Analysis. Classification is made in 5 categories as 'peripheral-economically active', 'private-transfer dependent', 're-entering limited', 'securely exiting', 'exit-and-reentering'. First, "peripheral-economically active" is a group which frequently experienced job status change and work insecurity. Second, "private-transfer dependent" is a group in which private transfer is likely to be supplements income in the incidence of unemployment. Third, "re-entering limited" is a group in which the proportion of no financial support combined with the absence of any economic activity is the largest. Fourth, the type "Securely exit" is th group whose members switches over to non-economically active status with pension receipt. The last type is "exit-and-reenter" that the member are highly possible to reenter in the labor market and stay in long time regardless of with or without pension plan. To examine the inequality among the types of retirement process, the duration of each status is analyzed. First, in the situation of being non-economically active, the duration of status is maintain public pension receiving and duration stabile in "securely exit" group. For "private-transfer dependent" type, members are mostly dependent on private financial support and that duration of it is longest. Through the analysis of retirement process without under other financial supports, it is "securely-exiting" type for which the duration of full-time employment is longest. It appears that the duration of part-time employment is longest in "peripheral-economically active" type. And for the case of non-waged employment it is "exit-and-reenter" type. Finally, the redistribution policy based on life course perspective is necessary to prevent that the opportunity in the structure before retirement stage and the unfavorable position in labor market make worse disadvantage in retirement process and after that.

• Journal of the Daesoon Academy of Sciences
• /
• v.24_2
• /
• pp.85-115
• /
• 2015

The Reordering of the Universe(天地公事) pursuing the Latter world(後天)'s ideal world while denying the Former world(先天) is composed of enormous rituals. The Dosu(度數) is formed through these rituals and the world is transformed according to the Dosu. The people who follow the Sangje(上帝), the subject of this universe reordering and also participate in the Reordering of the Universe are called as the followers. The follower group can be said as a ritual group in the aspect that they participate in the ritual for the Reordering of the Universe. They not only observed the rituals but also actively participated in them, so took certain roles in forming the Dosu. That is, they performed certain, given roles in developing the rituals, or actively proposed their ideas under the Sangje's leadership, and participated in the process realizing the Dosu. Therefore it can be said that they were a group initiatively participating in the process overcoming the Former world's Sangguk(相克) world, and making the latter world's ideal world. It seemed that the followers at that time might have gone through a certain entrance ritual process in order to join in such a follower group. The 『Jeon-Gyeong』 recorded the entrance rituals of a man called as Cha Gyeong Seok among tremendous followers relatively in detail. According to the 『Jeon-Gyeong』, he first had to get a unique test in the entrance process, and the test was proceeded in several stages: the wisdom test reflecting the Sangje's unusual intelligence, the patience test to endure physical, psychological pains for the great ethic, and the test to evaluate the testee's ability to give up past oneself and to follow the Sangje with a new body & mind. In the process separating himself from the past his appearance, Gyeong-Seok, the candidate to enter, faced a liminal situation, and then performed the incorporation rite. In this process, the purification rite going him out of the past relationship of benefits & grudges was performed, and he was given the regulations to comply as a member of the follower group. Through such serial processes, his entrance in the follower group was allowed. What requested to the candidate in this entrance process was the severance from one's past. For that, the candidate was needed to go out of his past life habits, to free from the relationship of benefits and grudges, and to sever him from his past faults. Such severance was the precondition for him to go out of the Former world's negative reality and to break from the Sanggeuk habits. Another thing requesting to the candidate as well as the severance from his past was to establish a new ideal. The new ideal should be matched with the ideal of the Reordering of the Universe whose main ideology was the Haewon-Sangsaeng(解冤相生). Such ideal can be said as the driving force to proceed toward the new ideal world of Latter World. And the candidate was requested to purify his mind and to participate in the Universe Fair Judgement (天地公庭). That can be said as an important condition for the new member directly to participate in the ritual of the Reordering of the Universe dramatically transforming the world. Finally, the candidate was given the regulations for his ascetic practice(修道) as well as his participation in the Reordering, and was requested to comply them. After becoming a member of this follower group, one had to practice his asceticism through the compliance with such regulations and the training of mantras(呪文) in order to accomplish the goal called as Dotong(道通). By fulfilling these requirements, the newly entered member could have the qualification to perform a certain role in the ritual of the Reordering of the Universe, and could accomplish his religious ideal.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).

• Journal of Intelligence and Information Systems
• /
• v.29 no.2
• /
• pp.101-114
• /
• 2023

In the wartime, aircraft carrying out a mission to strike the enemy deep in the depth are exposed to the risk of being shoot down. As a key combat force in mordern warfare, it takes a lot of time, effot and national budget to train military flight personnel who operate high-tech weapon systems. Therefore, this study studied the path problem of predicting the route of emergency escape from enemy territory to the target point to avoid obstacles, and through this, the possibility of safe recovery of emergency escape military flight personnel was increased. based problem, transforming the problem into a TSP, VRP, and Dijkstra algorithm, and approaching it with an optimization technique. However, if this problem is approached in a network problem, it is difficult to reflect the dynamic factors and uncertainties of the battlefield environment that military flight personnel in distress will face. So, MDP suitable for modeling dynamic environments was applied and studied. In addition, GIS was used to obtain topographic information data, and in the process of designing the reward structure of MDP, topographic information was reflected in more detail so that the model could be more realistic than previous studies. In this study, value iteration algorithms and deterministic methods were used to derive a path that allows the military flight personnel in distress to move to the shortest distance while making the most of the topographical advantages. In addition, it was intended to add the reality of the model by adding actual topographic information and obstacles that the military flight personnel in distress can meet in the process of escape and escape. Through this, it was possible to predict through which route the military flight personnel would escape and escape in the actual situation. The model presented in this study can be applied to various operational situations through redesign of the reward structure. In actual situations, decision support based on scientific techniques that reflect various factors in predicting the escape route of the military flight personnel in distress and conducting combat search and rescue operations will be possible.