• 한국정보통신학회논문지
• /
• 제16권7호
• /
• pp.1377-1382
• /
• 2012

본 논문에서는 가전기기에 탑재 된 FND에 표시되는 부호화 된 코드를 스마트폰으로 촬영하여 이로부터 원문데이터를 추출하는 인식기법에 대해 제안한다. 제안하는 스마트폰 기반의 FND 인식 기법은 먼저 차영상을 이용하여 입력되는 영상에서 FND의 위치를 추정한 뒤 RGB값 클러스터링을 통해 Segment를 추출한다. 다음으로 기울어진 Segment에 대한 정규화 과정을 거친 뒤 상대적인 거리를 이용하여 각각의 Segment를 인식한다. 실험을 통해 실제 스마트폰에서 사용 시 속도와 인식률이 모두 양호함을 확인하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권2호
• /
• pp.163-170
• /
• 2018

The purpose of this study was to analyze the structural relationship between radiation hazards and radiation benefits effecting on overcoming recognition of Fukushima nuclear disaster (FND) in Japan by using structural equation modeling (SEM). The subjects were 248 undergraduates from one university in Chungbuk province in Korea. From June 1, 2017 to July 30, 2017, we conducted a questionnaire survey on the radiation hazards and radiation benefits and on the overcoming recognition of FND. As a result, it showed that the recognition of radiation hazards has a significant effect on the benefits of radiation, but does not directly affect the overcoming recognition of FND. However, the recognition of radiation benefits has been mediating between radiation hazards perception and the overcoming recognition of FND. Therefore, it can be empirically confirmed that despite the radiation hazards the recognition of overcoming the FND depends on the level of radiation benefits by using the SEM.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권6호
• /
• pp.1728-1742
• /
• 2023

In this paper, we extended a hierarchical clustering technique, which is the most researched in the sensor network field, and studied a dynamic differential clustering technique to minimize energy consumption and ensure equal lifespan of all sensor nodes while considering the mobility of sinks. In a sensor network environment with mobile sinks, clusters close to the sinks tend to consume more forwarding energy. Therefore, clustering that considers forwarding energy consumption is desired. Since all clusters form a hierarchical tree, the number of levels of the tree must be considered based on the size of the cluster so that the cluster size is not growing abnormally, and the energy consumption is not concentrated within specific clusters. To verify that the proposed DDC protocol satisfies these requirements, a simulation using Matlab was performed. The FND (First Node Dead), LND (Last Node Dead), and residual energy characteristics of the proposed DDC protocol were compared with the popular clustering protocols such as LEACH and EEUC. As a result, it was shown that FND appears the latest and the point at which the dead node count increases is delayed in the DDC protocol. The proposed DDC protocol presents 66.3% improvement in FND and 13.8% improvement in LND compared to LEACH protocol. Furthermore, FND improved 79.9%, but LND declined 33.2% when compared to the EEUC. This verifies that the proposed DDC protocol can last for longer time with more number of surviving nodes.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권11호
• /
• pp.6893-6897
• /
• 2013

Background: During and after the Fukushima nuclear disaster (FND), many parents were concerned about the effects of radiation on the health of their children. Purpose: To clarify the factors that influenced general workers living with children and the effect of child age groups in implementing preventive behaviorsagainst radiation following the FND. Materials and Methods: A descriptive study of preventive behaviors among general workers was carried out 3-5 months after the nuclear disaster. The subjects were 1,394 regular workers, who took part in radiation seminars run by the Fukushima Occupational Health Promotion Center between July and September, 2011. In total, 1,217 responses were submitted, of which 1,110 were eligible for the present study. This anonymous questionnaire survey inquired about the presence and age of children in the household and about radiation preventive behavior implemented after the FND. The contribution of each variable was assessed by logistic regression analysis. Results: General workers in Fukushima who lived with younger children performed more preventive behavior against radiation during and after the FND. In particular, both location-related and daily routines were practiced significantly more frequently (p<0.01) by workers living with a child in the age ranges of 0-6 (8 of 10 items) and 7-12 (5 of 10 items). Conclusions: This is the first study to assess the positive association between living with children by age group and increased preventive behavior against radiation implemented by general workers after the FND.

• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.50-58
• /
• 2013

In Wireless Sensor Network, clustering scheme is used to prolong the lifetime of WSN by efficient usage of energy of sensor. In the distributed clustering protocol just like LEACH, every sensor in a network plays a cluster head role once during each epoch. So the FND is prolonged. But, even though every sensor plays a head role, the energy consumed by each sensor is different because the energy consumed increases according to the distance to the Base Station by the way of multiple increase. In this paper, we propose a mechanism to select a head depending on the distance to Base Station, which extends the timing of FND occurrence by 68% compared to the LEACH and makes network stable.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.313-314
• /
• 2006

Indicating product quantity by real time can be benefit both worker and management. Worker can compare real product quantity with its target and can adjust working speed to match with goal. Therefore, so called JPH equipment developed to indicate target quantity of product. As a main processor PIC16F877 was used and FND display were used to indicate current time, elapsed time, JPH value and target amount of product. Values like JPH and starting time, etc. are can easily be set by $4{\times}4$ numeric keypad and display datum likes target amount of product, current time and elapsed time, etc are displayed on FND by RS232 serial transmit. The operation of JPH equipment are tested and verified through long term test and are proved acting properly on working conditions.

• 한국기계가공학회지
• /
• 제21권6호
• /
• pp.30-35
• /
• 2022

This study has focused on the reliability evaluation of FCT inspection automation equipment for electric rice. To evaluate the reliability of FCT inspection automation equipment, voice analysis, Gray/R/G/B channel experiment, FND segment experiment, and robot position repeatability were performed. In the voice analysis experiment, the comparison value between the recorded and digital output waves was over 99%, indicating a very high result. It was confirmed that both the gray/R/G/B experiment using vision and the FND segment could confirm the output value of the product through vision. The position repeatability of the robot is also excellent, so it is concluded that the inspection effect through the FCT automation system will be excellent.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권3호
• /
• pp.156-162
• /
• 2020

Wireless Sensor Network (WSN) field is mainly studied to monitor and characterize large-scale physical environments to track various environmental or physical conditions, such as temperature, pressure, wind speed and humidity. WSN can be used in various applications such as wild surveillance, military target tracking and monitoring, dangerous environmental exploration and natural disaster relief. We design probabilistic mobile models that apply to mobile ad hoc network mobile environments. A probabilistic shift model proposed by dividing the number of moving nodes and the distance of travel into two categories to express node movement characteristics. The proposed model of movement through simulation was compared with the existing random movement model, ensuring that the width and variation rate of the first node node node node (FND) was stable regardless of the node movement rate. In addition, when the proposed mobile model is applied to the routing protocol, the superiority of network life can be verified from measured FND values. We overcame the limitations of the existing random movement model, showing excellent characteristics in terms of energy efficiency and stable in terms of changes in node movement.

• 대한지역사회영양학회지
• /
• 제27권3호
• /
• pp.245-253
• /
• 2022

Objectives: This study was conducted to find out if the dietary iron intake of Koreans estimated by 2 different methods (iron content sources) using the food intake data from the Korea National Health and Nutrition Examination Survey (KNHANES) are comparable. One method was based on the KNHANES's Food & Nutrient Database (FND) derived mainly from the Korean Food Composition Table and the other used the iron content (IC) of food samples processed in the Korean Total Diet Study (KTDS). Methods: Dietary intake data from the 2013-2016 KNHANES was used to select representative foods (RFs) in KTDS for iron analysis. Selection of the RFs and cooking methods for each RF (RF × cooking method pair) was performed according to the 'Guidebook for Korean Total Diet Studies' and resulted in a total of 132 RFs and 224 'RF × cooking method' pairs. RFs were collected in 9 metropolitan cities nationwide once or twice (for those with seasonality) in 2018 and made into 6 composites each, based on the origin and season prior to cooking. Then, the RF composites prepared to a 'table ready' state for KTDS were analyzed by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Dietary iron intake of the Korean population was estimated using only RFs' intake data based on the 2 sources of iron content, namely FND-KNHANES and IC-KTDS. Results: RFs in KTDS covered 92.0% of total food intake of Koreans in the 2016-2018 KNHANES. Mean iron intake of Koreans was 7.77 mg/person/day by IC-KTDS vs 9.73 mg/person/day by FND-KNHANES. The major food groups contributing to iron intake were meats (21.7%), vegetables (20.5%), and grains & cereals (13.4%) as per IC-KTDS. On the other hand, the latter source (FND-KNHANES) resulted in a very different profile: grains & cereals (31.1%), vegetables (16.8%), and meats (15.3%). While the top iron source was beef, accounting for 8.6% in the former, it was polished rice (19.2%) in the latter. There was a 10-fold difference in the iron content of polished rice between 2 sources that iron intakes excluding the contribution by polished rice resulted in very similar values: 7.58 mg/person/day by IC-KTDS and 7.86 mg/person/day by FND-KNHANES. Conclusions: This study revealed that the dietary iron intake estimated by 2 different methods were quite comparable, excluding one RF, namely polished rice. KTDS was thus proven to be a useful tool in estimating a 'closer-to-real' dietary intake of nutrients for Koreans and further research on various nutrients is warranted.

• Journal of information and communication convergence engineering
• /
• 제19권3호
• /
• pp.136-141
• /
• 2021

Research on wireless sensor networks has focused on the monitoring and characterization of large-scale physical environments and the tracking of various environmental or physical conditions, such as temperature, pressure, and wind speed. We propose a stochastic mobility model that can be applied to a MANET (Mobile Ad-hoc NETwork). environment, and apply this mobility model to a newly proposed clustering-based routing protocol. To verify its stability and durability, we compared the proposed stochastic mobility model with a random model in terms of energy efficiency. The FND (First Node Dead) was measured and compared to verify the performance of the newly designed protocol. In this paper, we describe the proposed mobility model, quantify the changes to the mobile environment, and detail the selection of cluster heads and clusters formed using a fuzzy inference system. After the clusters are configured, the collected data are sent to a base station. Studies on clustering-based routing protocols and stochastic mobility models for MANET applications have shown that these strategies improve the energy efficiency of a network.