• 한국안전학회지
• /
• 제30권5호
• /
• pp.114-122
• /
• 2015

FMEA and FTA have been widely applied to the safety studies for railway systems respectively. But it would be more effective to use these two methods at a same time because these are complementary. This article suggests a FMEA-FTA combined analysis technique to evaluate the risk for railway systems. A FMEA-FTA combined risk evaluation model and process are proposed and a case study is dealt with for PBU(Pneumatic Breaking Unit), a major subsystem of a railway vehicle.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제2권12호
• /
• pp.541-552
• /
• 2013

최근 우리 생활에 스마트 기술의 빠른 전파 때문에 정보 과학 및 기술 분야에 있어서는 스마트 폰의 소프트웨어 보안성이 중요한 이슈가 되고 있다. 보안성 중요 시스템인 스마트 폰은 은행 서비스, 유비쿼터스 홈 관리, 항공 고객의 검색 등의 서비스 시스템에 이용되기 때문에 비용의 리스크, 손실의 리스크, 이용가능 리스크, 그리고 사용상의 리스크에 관련 되어 있다. 스마트 폰의 보안성 이슈는 이들의 관찰된 고장들을 사용하여 소프트웨어 장애 분석을 하는 것이 핵심 접근 방법이다. 본 연구에서는 손으로 조작하는 디바이스들의 수렴하는 보안성과 신뢰성 분석 기법을 얻기 위해서 결함 트리 분석 (FTA)와 고장 모드 효과 분석(FMEA)을 사용하여 스마트 폰의 소프트웨어 보안성 분석을 위한 하나의 유효한 통합적 프레임 워크를 제안한다. 그리고 만약 하나의 고장 모드 효과 분석이 더욱 더 간단해지면 스마트 디바이스들의 보안성 개선뿐만 아니라 고장효과 의 감소를 위해서 제안된 통합적인 프레임 워크는 핵심 해법이 됨을 논의한다.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.50-61
• /
• 2018

방위력개선사업의 선행연구는 소요가 결정된 무기체계의 효율적인 획득방법 결정을 지원하기 위해 사업초기 단계에 수행되고 있다. 사업 초기단계의 선행연구는 그 중요성이 간과되어 소홀히 진행되어 왔으며, 이로 인한 성능 미충족 및 비용증가 등의 사업추진간 문제점이 지속적으로 발생되고 있다. 제한된 시간내 많은 항목의 선행연구를 수행한 결과, 핵심검토항목을 깊이 있게 검토하지 못함으로써 사업추진간 예상되는 위험을 식별하고 감소시키는 역할을 제대로 수행하지 못하고 있다. 따라서, 본 논문에서는 방위력개선사업 선행연구 단계에서 수행시 고려해야 할 핵심요소들을 식별하기 위해 시스템안전 분석과정에서 사용되고 있는 FTA/FMEA 기법의 활용에 대해 연구하였다. 구체적으로 수행방안 도출시 FTA/FMEA 기법의 적용에 대한 착안점 및 주어진 조건에 부응하도록 개선을 통해 핵심검토 항목 도출을 위한 방법론을 구축하였다. 본 연구의 결과를 토대로 방위력개선사업 선행 연구단계에서 핵심 수행요소 재정립을 통해 향후 방위력 개선사업의 사업관리 측면에서 발생할 수 있는 불필요성 및 예상되는 위험을 제거함에 따라, 비용 및 시간을 절감하고 위험감소를 통한 사업의 안정적 추진을 기대할 수 있을 것으로 기대된다.

• 한국산학기술학회논문지
• /
• 제19권10호
• /
• pp.89-100
• /
• 2018

방위력개선사업의 선행연구는 소요가 결정된 무기체계의 효율적 획득방법 결정을 지원하기 위해 수행되는 사업단계로, 선행연구단계에서 수행되어야할 요소를 식별하기 위해 안전분석 과정에서 활용되는 FTA/FMEA 기법의 수행방안을 착안 및 테일러링을 통해 핵심검토 항목 도출을 위한 방법론을 제시하였었다. 기존의 연구에서 도출한 핵심요소를 보완하기 위해 핵심요소로부터 발생 가능한 다양한 사건들을 추가 보완 및 분석이 필요했으며 이를 위해 타 산업분야에서 안전분석을 위해 수행하는 HAZOP 기법을 활용하여 핵심요소 도출결과를 보완하였다. HAZOP/FTA/FMEA 기법을 연계하여 도출된 선행연구단계의 핵심요소에 대해 입 출력 정보 및 연관관계를 설정하여 수행절차를 분석하고 모델화하였다. 또한 선행연구 수행성과에 대해 수행성숙도를 평가하고 성숙도가 낮은 핵심요소에 대해 관련 핵심요소와의 연동정보를 바탕으로 위험도 기반 대응 매뉴얼을 생성하였다. 본 연구결과를 토대로 방위력개선사업 선행연구단계에서 핵심요소 및 수행절차, 위험관리 대응 매뉴얼 적용을 통해 사업추진간 성능 비용 일정을 충족하고 예상되는 위험을 감소시켜 효율적이고 안정적인 방위력개서사업 추진을 기대할 수 있다.

• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.73-81
• /
• 2020

For the fault tree analysis (FTA) analysis of the packaged hydrogen filling station, the composition of the charging station was analyzed and the fault tree (FT) diagram was prepared. FT diagrams were created by dividing the causes of events into external factors and internal factors with the hydrogen event as the top event. The external factors include the effects of major disasters caused by natural disasters and external factors as OR gates. Internal factors are divided into tube tailer, compressor & storage tank, and dispenser, which are composed of mistakes in operation process and causes of accidents caused by parts leakage. In this study, the purpose was to improve the hydrogen station. The subjects of this study were domestic packaged hydrogen stations and FTA study was conducted based on the previous studies, failure mode & effect analysis (FMEA) and hazard & operability study (HAZOP). Top event as a hydrogen leaking event and constructed the flow of events based on the previous study. Refer to "Off shore and onshore reliability data 6th edition", "European Industry Reliability Data Bank", technique for human error rate prediction (THERP) for reliability data. We hope that this study will help to improve the safety and activation of the hydrogen station.

• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.91-102
• /
• 2000

Nowadays, every kind of system is changed so complex and enormous, it is necessary to assure system reliability, product liability and safety. Fault tree analysis(FTA) is a reliability/safety design analysis technique which starts from consideration of system failure effect, referred to as “top event”, and proceeds by determining how these can be caused by single or combined lower level failures or events. So in fault tree analysis, it is important to find the combination of events which affect system failure. Minimal cut sets(MCS) and minimal path sets(MPS) are used in this process. FTA-I computer program is developed which calculates MCS and MPS in terms of Gw-Basic computer language considering Fussell's algorithm. FTA-II computer program which analyzes importance and function cost of VE consists. of five programs as follows : (l) Structural importance of basic event, (2) Structural probability importance of basic event, (3) Structural criticality importance of basic event, (4) Cost-Failure importance of basic event, (5) VE function cost analysis for importance of basic event. In this study, a method of initiation such as failure, function and cost in FTA is suggested, and especially the priority rank which is calculated by computer-aided decision analysis program developed in this study can be used in decision making determining the most important basic event under various conditions. Also the priority rank can be available for the case which selects system component in FMEA analysis.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1468-1476
• /
• 2006

The goal of this thesis is to support safety and reliability characteristics of software intensive critical systems. The verification method developed is innovative from current state of the art in what concerns the verification viewpoint adopted: focusing on software faults, and not, like many other approaches purely on fulfilling functional requirements. As a first step and based on a number of well defined criteria a comparison was made of available literature in the area of static non formal non probabilistic software fault removal techniques. But, None of the techniques evaluated fulfilled all criteria set in isolation. Therefore a new technique was developed based on a combination of two existing techniques: the FMEA and FTA. These two techniques complement each other very well. It is possible to integrate both techniques with commonly used techniques at system level. The resulting new technique can be shown to combine nearly all aspects of existing fault removal techniques.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권2호
• /
• pp.241-259
• /
• 2005

The environmental problem is a main subject of the 21C and an environment destruction phenomenon by various kinds of environmental materials is reaching serious level. Nations to be classified as the environmental developed country, are born again environmental rich country. And they earn a large income by trade Every kind environmental resource in an international commercial transaction. Especially, the study that a reliability assessment method to prevent to reliability problem to be happened when the solder lead(lead-free solder), non-cd component, non-bromide component(without the polybrominated biphenyls(PBB) and polybrominated diphenyl ethers(PBDE))and hexavalent chromium(Cr VI) clearance component and mercury-free applied to electronic equipment is progressed. As the result of the study for applying of a reliability assessment technique of lead-free solder that recognized the most of urgent problem at the company, combination accelerated life test could taken by adding and appling the part of a humidity acceleration part to Eyring Model which is proposed by R.E.Thomas. The reliability assessment methods study of PWB clean environmental materials is expected to respond to a reliability elevation and environmental material regulation policy spreading all over the world by beginning form Europe.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.76-87
• /
• 2010

According to the new rules and regulations (New SOLAS), major safety critical systems are to be designed to be redundant, which is called 'Redundancy Design'. This paper was to quantitatively analyze the degree of influence of the redundancy design applied to major safety critical systems using IMO's FSA(formal Safety Assessment) method. For the purpose of this study, the diesel engine system, which is actually one of major safety critical systems, was dealt with FMEA, FTA and ETA technique. In addition, whether the redundancy was met or not was verified and the degree of safety, or redundancy, was represented in terms of reliability. In conclusion, the safety of propulsion systems is possibly assessed systematically by estimating the risk level in terms of frequency and fatality.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권3호
• /
• pp.169-177
• /
• 2021

Recently, the use of electric and electronic control systems is increasing in the automobile industry. This increase in the electric and electronic control system greatly increases the complexity of designing a vehicle, which leads to an increase in the malfunction of the system, and a safety problem due to the malfunction is becoming an issue. Based on IEC 61508 relating to the functional safety of electrical/electronic/programmable electronics, the ISO 26262 standard specific to the automotive sector was first established in 2011, and a revision was published in 2018. Malfunctions due to system failure are covered by ISO 26262, but ISO/PAS 21448 is proposed to deal with unintended malfunctions caused by changes in the surrounding environment. ISO 26262 sets out safety-related requirements for the entire life cycle. Functional safety analysis includes FTA (Fault Tree Analysis), FMEA (Failure Mode and Effect Analysis), and HAZOP (Hazard and Operability). These analysis have limitations in dealing with failures or errors caused by complex interrelationships because it is assumed that a failure or error affecting the risk occurs by a specific component. In order to overcome this limitation, it is necessary to apply the STPA (System Theoretic Process Analysis) technique.