• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.209-216
• /
• 2004

This study was aimed to assess the effects of microclimate factors on lettuce chlorophyll fluorescent responses and to develop an environment control system for plant growth by adopting a simple genetic algorithm. The photosynthetic responses measurements were repeated by changing one factor among six climatic factors at a time. The maximum Fv'/Fm' resulted when the ambient temperature was $21^{\circ}C,\;CO_2$ concentration range of 1,200 to 1,400 ppm, relative humidity of $68\%$, air current speed of $1.4m{\cdot}s^{-1}$, and the temperature of nutrient solution of $20^{\circ}C$. In PPF greater than $140{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, Fv'/Fm' values were decreased. To estimate the effects of combined microclimate factors on plant growth, a photosynthesis efficiency model was developed using principle component analysis for six microclimate factors. Predicted Fv'/Fm' values showed a good agreement to measured ones with an average error of $2.5\%$. In this study, a simple genetic algorithm was applied to the photosynthesis efficiency model for optimal environmental condition for lettuce growth. Air emperature of $22^{\circ}C$, root zone temperature of $19^{\circ}C,\;CO_2$ concentration of 1,400 ppm, air current speed of $1.0m{\cdot}s^{-1}$, PPF of $430{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and relative humidity of $65\%$ were obtained. It is feasible to control plant environment optimally in response to microclimate changes by using photosynthesis efficiency model combined with genetic algorithm.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.1
• /
• pp.28-34
• /
• 2017

This study was carried out to investigate growth characteristics of woody plants that are widely used indoors in accordance with irrigation frequency and to find the optimum irrigation conditions for plants that help to improve the indoor environment. Four woody plants used in this study included Ardisia pusilla, Clusia rosea, Fatsia japonica, and Ficus elastica. They were planted in pots with a diameter of 10cm and cultivated in three different irrigation frequencies: two times per week, one time per week, and one time per two weeks. After 120 days, they were measured by plant height, fresh weight, dry weight, SPAD value, leaf color, leaf water potential, chlorophyll fluorescence (Fv/Fm), and photosynthetic rate. The average soil moisture content was $48.8{\pm}2.1%$ in two times per week, $25.2{\pm}4.4%$ in one time per week, and $10.3{\pm}2.4%$ in one time per two weeks. For A. pusilla, leaf water potential was higher, and Fv/Fm value was 0.731 in two times per week irrigation, showing more wetness. For A. pusilla, F. japonica and F. elastica photosynthetic rate was significantly lower in one time per two weeks irrigation, appearing to be more sensitive to drying than C. rosea. When irrigated one time per week, with the soil's volume average moisture content of 25%, all four woody plants used in this experiment proved to grow smooth. Thus, it was determined to be good for use in indoor landscaping.

• Membrane Journal
• /
• v.10 no.4
• /
• pp.198-204
• /
• 2000

Pervaporation membranes were fabricated by low temperature plasma treatment the concentrate butanol solution from fermentation process. Effects of power, reaction time, and monomer flow rate were examined to optimize the (W!FM)t value as 4.0389 x 109 J . min/kg. Various organic compounds were tested in plasma treatment. Contact angle and relative sorption ratio were examined in terms of membrane performance. With the increase of contact angle and relative sorption ratio separation factor was enhanced from 0.186 to 3.525. and butanol flux increased from 0.042 to 0.567 kglm2. hr. Hydrophobicity of the membrane increased the affinity with butanoL Heat of mixing for monomer with butanol was examined, but failed to find the trend, because plasma polymerization of monomer produced the new compounds much different from monomers.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.1
• /
• pp.93-97
• /
• 2012

This study was conducted to evaluate the efficiency of various inorganic and organic materials to improve physical properties of soil. Saline sodic soil (saturation percentage = 40.36%, $EC_e=5.15dS\;m^{-1}$, $pH_s=8.70$, $SAR=18.84(m\;mol\;L^{-1})^{1/2}$, bulk density =$1.49Mg\;m^{-3}$) was collected, brought to wire house and filled in pots after laboratory analysis for various parameters. Different sources of organic nutrients like farm manure (FM), press mud, compost, poultry manure and sesbania green manure were analyzed for their chemical composition. The experiment comprised of 12 treatments replicated thrice; $T_1$: control (recommended NPK), $T_2:{\frac{1}{2}}$ recommended NPK, $T_3$: FM at 1.5% by soil weight, $T_4$: pressmud at 1.5% by soil weight, $T_5$: compost at 1.5% by soil weight, $T_6$: poultry manure at 1.5% by soil weight, $T_7$: sesbania green manure at 1.5% by soil weight, $T_8:T_2$ + FM at 0.75% by soil weight, $T_9:T_2$ + pressmud at 0.75% by soil weight, $T_{10}:T_2$ + compost at 0.75% by soil weight, $T_{11}:T_2$ + poultry manure at 0.75% by soil weight, $T_{12}:T_2$ + sesbania green manure at 0.75% by soil weight. These treatments were applied using completely randomized (CR) design and appropriate time was given to decompose these organic nutritional sources. Seeds of wheat cultivar Sahar-2006 were sown. After harvesting the wheat, soil samples were collected from each pot and analyzed for various physical properties like bulk density, porosity and saturation percentage. An improvement in physical properties (bulk density, porosity and saturation percentage) of soil was noticed with the application of various organic nutritional sources but role of compost alone ($T_5$) remained prominent.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.9
• /
• pp.1285-1293
• /
• 2005

The present study was conducted to evaluate and compare the effects of various animal and plant protein sources on piglet' performance, digestibility of amino acids and gut morphology in weaned pigs until 28 days after weaning. The plant protein sources used were soybean meal (SBM), fermented soy protein (FSP), rice protein concentrate (RPC); and animal protein sources tested were, whey protein concentrate (WPC) and fishmeal (FM). Iso-proteinous (21%) diets were formulated and lysine (1.55%) content was similar in all the diets. The level of each protein source added was 6% by replacing SBM to the same extent from the control diet containing 15% SBM. The ADG was higher (p<0.05) in the groups fed animal proteins as compared with plant proteins at all the levels of measurement, except during 15-28 days. The highest ADG was noted in WPC and FM fed diets and lowest in SBM fed diet. The feed intake was higher in animal protein fed groups than plant proteins at all phases, but the feed:gain ratio was not affected by protein sources except during overall (0 to 14 day) measurement which was improved (p<0.05) in animal protein fed diets compared to plant protein sources. The digestibilities of gross energy, dry matter and crude protein were higher in animal protein fed groups than for plant protein fed sources. The apparent ileal digestibilities of essential amino acids like Leu, Thr, and Met were significantly (p<0.05) higher in animal proteins fed animals as compared with plant protein fed animals. But the apparent fecal digestibilities of essential amino acids like Arg and Ile were significantly higher (p<0.05) in plant protein diets than animal protein sources. The villous structure studied by scanning electron microscope were prominent, straight finger-like, although shortened and densely located in FM fed group as compared with others. The lactic acid bacteria and C. perfringens counts were higher in caecal contents of pigs fed plant proteins than the animal proteins. Overall, it could be concluded that animal protein sources in the present study showed better effects on growth performance, nutrient digestibility and gut morphology than plant protein sources.

• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.2
• /
• pp.109-114
• /
• 2001

A CAB cDNA vector(pKGCAB), encoding the light harvesting chlorophyll a/b binding protein in Korean ginseng (Panax ginseng C. A. Meyer), was constructed with the CaMV35S promoter of plant expression vector. The chimeric vector was transformed into tobacco(Nicotiana tabacum cv. NC 82) using Agrobacterium tumefaciens LBA 4404 strain, and the transgenic tobacco plant CAB-TP2 was selected. Photosynthetic rates of the CAB-TP2 plant at before-flowering stage were increased about 20% under low irradiance conditions of quantum 100 and 500 $\mu$mol.m$^{-2}$ s$^{-1}$ , however, the rates were similar to those of NC 82 under quantum 1000 and 2000 $\mu$mol.m$^{-2}$ s$^{-1}$ conditions. The plants were germinating under low- or normal irradiance condition and the quantum yield of photosystem III were measured. The differences of the Fv/Em values between conditions were 0.07 and 0.01 in NC 82 and CAB-TP2, respectively. The mature leaves in the position 8-10 of the CAB-TP2 at before-flowering stage revealed l0% higher Fv/Fm values in range of 0.759 to 0.781 and 40% more chlorophyll contents of 70-93mg/$m\ell$ than those of normal NC 82. These data suggest the possibility that the increase in photosynthetic activity of leaves under low light intensity in the canopy of CAB-TP2 transgenic tobacco might lead to increase the quality of lower tobacco leaves.

• Horticultural Science & Technology
• /
• v.32 no.2
• /
• pp.142-148
• /
• 2014

Effect of silicon (Si) nutrition on growth and temperature stress tolerance of Nephrolepis exaltata 'Corditas' grown in a soilless substrate was examined. In vitro-grown acclimatized plantlets were transplanted into the pots containing a coir-based substrate. A nutrient solution containing 0, 50, or $100mg{\cdot}L^{-1}$ Si was supplied through a drip-irrigation system. After 5 months of cultiv ation, S i-treated and -untreated p lants were grown at 10, 25, or $40{\pm}1^{\circ}C$ under a 12 h photoperiod with $530{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD and 60% RH. After 7 days, chlorophyll content and chlorophyll fluorescence parameters were measured. Silicon nutrition had a negative effect on growth characteristics of N. exaltata 'Corditas'. However, Si-treated plants had more tolerance to temperature stress than the control plants. The Fv/Fm value was not significantly different when the plants were exposed to $25^{\circ}C$. However, significant difference in Fv/Fm was recorded when plants were exposed to 10 or $40^{\circ}C$. Thus, Fv/Fm could be used as an indicator of low and high temperature tolerance in ferns. The present study also suggests that application of Si may be used to enhance temperature tolerance of ferns.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.178-182
• /
• 2000

During the past five years, there has born tremendous interest worldwide in the possibility of exploiting chaos in wideband communication systems. Many different demodulation techniques have been proposed up to date. They can be divided into two basic categories. In the first approach, like the conventional coherent demodulation techniques, the chaotic signal has to be recovered from the received noisy signal by synchronization. However, the chaotic synchronization techniques published to data are so sensitive to the channel noise and distortion that these techniques can not be used in radio communications. In the second approach, the demodulation is carried out nonsynchronization. This paper surveys the different chaotic communication techniques that can be implemented nonsynchronization and compares the threshold and BER of the different methods. Finally, FM-DCSK is introduced the first step for apply to wideband chaos digital CDMA, where the data is not limited by the inherent nonperiodic property of the chaotic signal.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.4
• /
• pp.60-73
• /
• 1973

The reactor noise analysis was performed by the cross correlation method using two detectors to determine the dynamic stability and the system parameter of TRIGA Mark-II reactor under critical and subcritical conditions. The a values turned out to be 46.67 and 70.04 respectively at zero power and full power under critical condition, while 79.47 and 97.59 respectively at the safety rod dropping and the regulating rod dropping under subcritical condition. Prompt neutron life time of TRIGA Mark-II reactor measured 107 and 160 $\mu$sec, and shut down margin was -10.03$\times$10-4 at the safety rod dropping and -29-43$\times$10-4 at the regulating rod dropping CDC 3100/MSOS digital computer, HITACHI 505 Analog computer, and preamplifier, bandpass filter, FM modulator or demodulator designed for this specific purpose, were employed for the present investigation.

• Restorative Dentistry and Endodontics
• /
• v.47 no.3
• /
• pp.32.1-32.11
• /
• 2022

Objectives: This study aimed to evaluate the influence of inorganic composition and filler particle morphology on the mechanical properties of different self-adhesive resin cements (SARCs). Materials and Methods: Three SARCs including RelyX Unicem-2 (RUN), Maxcem Elite (MAX), and Calibra Universal (CAL) were tested. Rectangular bar-shaped specimens were prepared for flexural strength (FS) and flexural modulus (FM) and determined by a 3-point bending test. The Knoop microhardness (KHN) and top/bottom microhardness ratio (%KHN) were conducted on the top and bottom faces of disc-shaped samples. Sorption (Wsp) and solubility (Wsl) were evaluated after 24 hours of water immersion. Filler morphology was analyzed by scanning electron microscopy and X-ray energy dispersive spectroscopy (EDS). FS, FM, %KHN, Wsp, Wsl, and EDS results were submitted to 1-way analysis of variance and Tukey's post-hoc test, and KHN also to paired t-test (α = 0.05). Results: SARC-CAL presented the highest FS value, and SARC-RUN presented the highest FM. SARC-MAX and RUN showed the lowest Wsp and Wsl values. KHN values decreased from top to bottom and the SARCs did not differ statistically. Also, all resin cements presented carbon, aluminum, and silica in their composition. SARC-MAX and RUN showed irregular and splintered particles while CAL presented small and regular size particles. Conclusions: A higher mechanical strength can be achieved by a reduced spread in grit size and the filler morphology can influence the KHN, as well as photoinitiators in the composition. Wsp and Wsl can be correlated with ions diffusion of inorganic particles.