• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2650-2652
• /
• 1999

To satisfy the demand for small size, light weight. high density power supply, the switching frequency of DC/DC converters has been increased. The PWM control of the conventional SMPS have a switching frequency that a level of the conducted noise spectra contribute to switching frequency band. So the electronic equipment is not only affected from that but is restricted to internal regulation like CISPR, FCC, and VDE. In this paper, we analyzed Bi-FM. Bi-FM is two fixed switching frequency with a modulation frequency. So emission spectrum of Bi-FM control signal is spreaded and spectral power level is reduced. In this paper, we analyze the spectral analysis of Bi-FM control signal and the spectral comparison between the PWM control and Bi-FM control. And we confirm that reduced the spectrum power level through simulation using Pspice and experiment.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.27-36
• /
• 1992

Frequency modulation spectroscopy of the super-cavity, of which finesse is app. 40,000 has been demonstrated by using a sigle mode He-Ne laser. In-phase and quardrature components of frequency modulation signals (FM signal) were obtained by using the 1.5 MHz-driven-electrooptic phase modulator. The vector locus of the FM signa in the phase space, which is consisted of in-phase and quardrature components of the FM signal, was observed and analyzed for the dependence of FM signal upon the phase of the reference signal of a phase-sensitive-detector. According to rotating the phase of the reference signal, the vector locus was observed to rotate with the same phase angle as the reference signal. The in-phase component of the FM signals will be used to stabilize the frequency of the He-Ne laser to the resonant frequency of the super-cavity.

• Speech Sciences
• /
• v.12 no.4
• /
• pp.17-29
• /
• 2005

Time-frequency representation reveals some useful information about instantaneous frequency, instantaneous bandwidth and boundary of each AM-FM component of a speech signal. In many cases, the instantaneous frequency of each component is not constant. The variability of instantaneous frequency causes degradation of resolution in time-frequency representation. This paper presents a method of adaptively adjusting the transform kernel for preventing degradation of resolution due to time-varying instantaneous frequency. The transform kernel is the form of frequency modulated function. The modulation function in the transform kernel is determined by the estimate of instantaneous frequency which is approximated by first order polynomial at each time instance. Also, the window function is modulated by the estimated instantaneous. frequency for mitigation of fringing. effect. In the proposed method, not only the transform kernel but also the shape and the length of. the window function are adaptively adjusted by the instantaneous frequency of a speech signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.2
• /
• pp.63-75
• /
• 1983

This paper has investigated and discussed the effects of multiple PSK signals upon an wideband FM signal in an intersystem interference environment between analog and digital radios. Using the derived approximate equation for the output haseband interference noise, the signal-to-interference noise power ratio(SNR) in the top channel baseband signal has been numerically calculated. The results are plotted in graphs as the functions of carrier-to-noise ratio(CNR), carrier-to interfer power ratio(CIR), and normalized carrier separation. From the results in this paper, one can know some optimu, or suitable, operating conditions(frequency allocation, bandwidth, and power, etc.) for an FM channel in the intersystemn interferences from digital PSK channels.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1233-1239
• /
• 2000

In this paper, a new approach is proposed for effectively estimating the occupied bandwidth of frequency modulation (FM) signals. The proposed method makes use of the smoothing niter for removing the perturbation of spectrum envelope, which frequently occurs in FM signals having the instantaneous frequency. An effective procedure is derived for finding the relatively accurate bandwidth of FM signals combined with x-dB bandwidth measurement method, which International Telecommunication Union-Radiocommunication (ITU-R) recommended. It was shown that the proposed approach provides superior performance relative to the one obtained with the x-dB bandwidth measurement method in terms of sample bias and mean squared error of bandwidth estimates.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.922-925
• /
• 2005

This article describes a FM modulation algorithm to increase the measurement speed by increasing the beat frequency of the laser without acousto-optic modulator(AOM) in the heterodyne laser interferometer. The proposed algorithm can increase the beat frequency of the heterodyne laser which limit the measurement speed by adjusting a carrier frequency through electronic circuit, while AOM is used to shift the frequency of the heterodyne laser in conventional method. Electronic circuit is constructed to modulate the signals from a laser interferometer and a waveform generator. The brier analysis, the measurement scheme of the system, and the experimental results using a Zeeman-stabilized He-Ne laser are presented. They demonstrate that the proposed algorithm is proven to enhance the measurement speed limit by increasing the beat frequency of the heterodyne laser.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.338-341
• /
• 2013

본 논문에서는 동일 주파수 대역 내 DRM(Digital Radio Mondiale) Plus 신호와 FM(Frequeny Modulation) 신호가 모두 서비스 되는 Hybrid 방송 모드에 적합한 DRM Plus 신호 검출 기법을 제안한다. OFDM(Orthogonal Frequency Division Multiplexing) 신호의 Guard-Interval 상관 기법을 그대로 적용할 경우 DRM Plus 신호 검출 성능은 우수하나, FM 신호 수신 시 False Alarm 발생 확률이 증가하는 문제점이 발생한다. 제안한 방법은 Guard-Interval 상관 방법에 Reference 블록을 포함하고 있어, 약한 DRM Plus 신호에서도 판별 확률이 높고, 아날로그 FM 신호 수신 시 False Alarm이 발생할 확률이 낮은 특징이 있다. 모의 실험을 통하여 제안한 기법의 성능을 확인한다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.07a
• /
• pp.23-31
• /
• 1991

최근 레이저 분광학에 있어서 고감도 분광법으로 알려져 있는 주파수 변조 분광법(frequency modulation spectroscopy)과 레이저 광 주파수 안정화 응용에 대한 원리와 특징을 살펴본다. 또 super-cavity을 이용한 단일모드 He-Ne 레이저를 사용하여 FM 분광신호를 검출하고 그 신호특성에 대하여 기술하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1204-1208
• /
• 1991

This paper describes the 2-channel telemeter system using AM(Amplitude Modulation) - FM (Frequency Modulation) techniques suitable for measurement of spindle torque by strain gage. In order to evaluate the developed system, the model tests were performed for test specimens. The developed system was installed on the plate mill and it was possible to measure and analyze the torque signal of spindle,

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2426-2438
• /
• 1994

In this paper we present for the first time the electric circuit model for direct frequrncy modulation(FM) response of the conventional distributed-feedback(DFB) semiconductor laser diodes. Especially, in this paper, the proposed model includes not only the carrier density modulation effect, but also the temperature modulation effect determining the DFM characteristics of DFB characteristics of DFB semiconductor lasers. The DFM response due to injection current modulation was obtained as a function of modulation frequency from DC to a few GHz. The circuit model representing the temperature modulation effect is obtained from the structure of DFB LD chip and the simulation results are compared with the published experimental results. The circuit model representing the temperature modulation effect is obtained from the structure of DFB LD chip and the simulation results are compared with the published experimental results. The circuit model representing carrier density modulation effect is obtained from the rate equations of DFB lasers and the simulation results are compared with the results that were obtained by the conventional numerical analysis approach. The results showed good agreements.