• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.863-868
• /
• 2009

최근에 이상기후로 인해 예측하기 힘든 기상현상들이 돌발적이고 대규모의(또는 설계빈도를 초과하는) 집중호우를 야기하여 댐과 같은 수공구조물의 안전을 위협하고 있다. 그러므로 이러한 대규모의 집중호우로 발생되는 댐의 붕괴에 대한 대책을 수립하는 것이 매우 중요하다. 특히 댐의 붕괴가 도시의 침수로 이어지는 경우는 더욱 많은 인명과 재산피해를 발생시키므로 도시지역을 흐르는 범람홍수파의 특성에 대한 규명은 매우 중요하다. 본 연구에서는 홍수범람파의 특성을 3차원 수치모형인 FLOW-3D를 이용하여 모의하였다. 저류 수심 0.4m, 두께 0.8m의 댐이 붕괴하여 붕괴폭이 1m가 된다고 가정하였고, 도시지역은 댐으로부터 5m 거리에 위치한다고 가정하였다. 대상 도시지역은 $0.3m{\times}0.3m{\times}0.6m$($L{\times}W{\times}H$)인 정사각형 블록들을 $5{\times}5$ 정방향으로 배치하였고, 수리실험 결과와 비교 검증하였다. 그리고 범람홍수파가 흐름방향과 일치하게 접근해오는 경우와 도시지역으로의 접근각도에 따른 범람홍수파의 변화를 보기위해 흐름방향에 대하여 각각 $10^{\circ}$, $22.5^{\circ}$, $45^{\circ}$ 회전시킨 경우에 대해 수치모의를 수행하였다. 그리고 각 경우의 침수영향들을 비교하여 그 차이점을 분석하였다. 모의 결과 범람홍수파의 접근각도가 흐름방향에 대해 커질수록 도시선단에서 도수는 적게 일어났고 유속도 감소하였으며, 수심은 증가하였다. 본 연구의 결과를 토대로 범람홍수파가 흐름방향과 일치하게 접근해 올 때가 가장 위험한 case 라는 것을 알 수 있다. 이 결과는 추후 유체-구조물간의 연성해석을 통하여 범람 홍수파의 흐름이 건물에 주는 영향까지 파악한다면 예방대책 수립의 보다 더 정확한 기초자료로 활용할 수 있을 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.20-20
• /
• 2020

신곡수중보는 한강종합개발사업(1982년~1986년) 중 하도정비로 인하여 상시 수위가 저하됨으로써 조수의 과도한 역류 등으로 발생하는 이수상의 문제점을 해결하고 상류에 설치된 잠실수중 보 사이의 수위유지 및 하천 공간 이용의 극대화, 연안 농경지의 용수공급 및 하천환경 보전을 목적으로 건설되어, 「잠실 및 신곡수중보 관리규정(1986)」 및 「신곡수중보 운영 매뉴얼」에 의해 관리·운영되고 있다. 신곡수중보는 준공된 이래로 한강하류의 흐름 해석에 있어 중요한 기준과 경계로서 이와 관련한 다양한 연구가 진행되었다. 신곡수중보로 인한 흐름의 변화가 하상과 생태에 미치는 영향에 관한 연구와 하구역에서의 조위 및 흐름특성과 밀도류의 거동에 관한 1, 2차원 수치해석연구가 활발히 진행되었다. 본 연구에서는 그동안 1, 2차원 수치해석연구로 한정되었던 신곡수중보 흐름특성에 관련하여 실제 수문 운영 방식을 반영한 3차원 수치해석을 수행하여 구조물의 상·하류에서 발생하는 와류 및 이차류와 같은 3차원적 흐름 구조와 이에 따른 지형의 침식·퇴적 및 구조물에 미치는 영향 등을 구체적으로 분석하였다. 우선, 신곡수중보 운영 매뉴얼과 실제 가동보 운영시스템을 비교하여 수문개방 시기, 유량 기준의 수문 운영 방법, 수위 변화에 따른 수문 운영 방법, 수문개방 순서를 분석하고 신곡수중보 주변 흐름에 대한 3차원 수치해석모형 구축을 위한 경계조건을 산정하였다. 수치해석에는 상용프로그램인 FLOW-3D를 사용하였으며, 경계처리기법 및 난류해석을 위해 FAVOR 기법과 RNG k-ε 모델을 적용하였다. 수문 동시개방 개수, 수문 개방 위치 및 순서, 개방 높이에 대한 조건을 변화시켜 구성한 시나리오에 대해 수치해석 후, 유속, 난류에너지, 이차류 등의 흐름특성을 분석하고 상·하류 수위차에 따른 방류량을 산정하여 시설물의 관리안을 도출하고 운영 매뉴얼의 개정안을 제시하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.859-871
• /
• 2014

In order to analyze the density current due to salt and temperature difference, this study develops new numerical model (LES-WASS-3D ver. 2.0) by introducing state equation for salt and temperature and 3D advection-diffusion equation to existing 3D numerical wave tank (LES-WASS-3D ver. 1.0). To verify the applicability, the newly-developed numerical model is analyzed comparing to the experimental result of existing numerical model. In the result, it well implement the behavior and vertical salt concentration of advected and diffused seawater as well as flow velocity and temperature of the discharged warm water. This confirms the validity and effectiveness of the developed numerical model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.627-634
• /
• 2008

In a numerical simulation of open channel turbulent flows using RANS (Reynolds averaged Navier-Stokes) equations model equipped with VOF (Volume of Fluid) scheme, the determination of wall roughness for wall function was studied. The roughness constant, based on the law-of-the-wall for flow on rough walls, obtained by experimental works for pipe flows is employed in general wall functions. However, this constant of wall function is the function of Froude number in open channel flows. Thus, the wall roughness should be determined by taking into account the effect of Froude number. In addition, the wall roughness should be corresponding to Manning's roughness coefficient widely used for open channels. In this study, the relation between wall roughness height as an input condition and Manning's roughness coefficient was investigated, and an equation for effective wall roughness height considering the characteristics of numerical models was proposed as a function of Manning's roughness coefficient.

• Journal of Korea Water Resources Association
• /
• v.52 no.2
• /
• pp.115-123
• /
• 2019

The effects of the Froude numbers on turbulent flow patterns downstream of a non-submerged spur dike were investigated in a laboratory flume. Three-dimensional velocities and water depths were measured using Acoustic Doppler Velocimetry and distance sensors under three Froude number conditions ($Fr_d=0.31$, 0.38, and 0.46). The results show that there are marginal differences in the velocity fields downstream of a spur dike due to the change of the Froude number. However, an increase of the Froude number was found to reduce cross-sectional area in the flow and to increase the strength of the jet-like flow. The jet-like flow was observed to displace the location of the maximum turbulence kinetic energy within a cross section toward the inner bank in the transverse direction.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.3
• /
• pp.200-213
• /
• 1993

A model experiment on a midwater rope trawl net which is used in the North Pacific to catch alaska pollack is carried out in the circulating tank to examine the basic efficiency of the net. The prototype is the net used by M/S Hanil(1, 179GT, 2, 700PS), a Korean trawler. The model net was made according to the Tauti's Similarity Law of Fishing Gear in 1/100 scale by considering the condition of the tank. To measure the basic efficiency of the standard model net, the vertical opening and width between some points marked on the net were measured, and the hydrodynamic resistance were determined. Then the constructive conditions of the net were varied as follows and the factors were measured again to compare the efficiency of those nets with that of the standard net(A-1 type) front weight multiplied 1.5 times: A-2 type. buoyancy and depressing force multiplied 1.7 times: A-3 type. front weight multiplied 1.5 times on A-3 type: A-4 type. depressors rigged at ground rope: B type. cod-end stuffed with cashmylon wad: C type. The results obtained can be summarized as follows: 1. The vertical opening at the center of head rope was steeply decreased with the flow velocity increasing and the vertical opening H(m) can be expressed in H=1.2v super(-1.2)(v : flow velocity in m/sec). The width of the net varied a little when the flow velocity was over 0.4m/sec, and the width of net mouth showed about 37% of the distance between the fore tips of net pendant. The shape of net mouth was almost a circle at 0.2m/sec and then steeply flatted elliptically with the flow velocity increasing and the area of mouth S(m super(2)) can be expressed in S=(1.65-2.3v)$\times$10 super(-2). The hydrodynamic resistance of the net increased almost linearly with the flow velocity increasing and the resistance R(kg) can be expressed in R=3.2$\times$d/l$\times$abv. where d/l denotes the mean of d(diameter of netting twine) and l(length of a leg in a mesh) from wing tip to the end of bag-net except cod-end on the side pannel, and a denotes the strectched circumference of the net at the fore end of a meshed part and b the stretched length of the whole net from wing tip to the end of cod-end. 2. In the condition-varied nets, the vertical opening of head rope showed some increase in every type net except the C type, and the increase showed the greatest in the B type by 30~54%, whereas it showed decrease in the C type by 5~10%. Variation of the area of net mouth showed almost the same tendency as the vertical opening and the increase showed the greatest in the B type by 20%, whereas it showed decrease in the C type by 12%. Hydrodynamic resistance showed some increase in every type compared with the standard net, and the rate of increase indicated 5~10% in the A-2, A-3 and A-4 type, 22% in the B type and 3% in the C type.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1237-1246
• /
• 2015

A novel technique was proposed to calculate fluxes accurately by separation of flow area into a part of step face which is dominated by flow resistance of it and an upper part which is relatively less affected by the step face in analyzing shallow-water flows over discontinuous topography. This technique gives fairly good agreement with exact solutions, 3D simulations, and experimental results. It has been possible to directly analyze shallow-water flows over discontinuous topography by the technique developed in this study. It is expected to apply the developed technique to accurate evaluation of overflows over weirs or retaining walls (riverside roads) and areas flooded by the inundation in the city covered in discontinuous topography.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.8-8
• /
• 2023

하천에 설치된 횡단구조물은 어류의 이동을 방해하거나 불가능하게 만들지만, 어도를 통해 어류의 이동 및 서식생태에 미치는 영향을 최소화할 수 있다. 하천에 서식하는 대부분의 어종은 연중 회유하는 특성을 갖기 때문에 어류의 자유로운 이동을 위해서 어도는 필수적으로 설치해야 하는 시설이다. 어도는 어류의 유영능력을 기반으로 수리시설물의 낙차나 하천의 유량 등을 고려하여 설계한다. 이처럼 어도 내의 흐름은 어류의 소상능력에 영향을 미치는 주요 인자로 평가되고 있으며 어도 내 흐름에 따라 어도의 이동효율에 차이가 발생한다. 따라서 본 연구에서는 수치모의를 통해 계단식 어도 내의 어류 친화적 흐름의 특성을 연구하였다. 어류 친화적 흐름은 어류가 쉽게 유영할 수 있는 흐름을 의미하며, 유속, 난류운동에너지, 에너지소산을 기준으로 판단할 수 있다. 이를 위해 3차원 수치모형 FLOW-3D를 이용하였으며, 개수로 실험을 통해 모델의 검증을 수행하였다. 연구에서 사용한 어도의 형식은 국내에서 전체 어도의 20%를 차지하고 있는 계단식 어도로 선정하였다. 수위와 유속에 따라 흐름조건을 설정하였으며, 실험결과를 통해 어류의 유영능력에 영향을 미치는 3가지 항목의 값을 계산하여 어도 내의 어류 친화적 흐름의 적합성을 판단하였으며, 이를 바탕으로 최적의 흐름조건을 제시하였다. 향후, 본 연구결과는 계단식 어도를 설계하는 것에 기초자료가 될 수 있을 것이라 기대된다. 그러나 어도의 설계는 어도의 설치위치나 어도의 입구 위치 및 형태 등과 같은 설치계획에 따라 어도의 이동효율이 좌우될 수 있기 때문에 하천환경을 고려하는 추가적인 연구가 필요할 것으로 판단된다.

• Journal of Korea Water Resources Association
• /
• v.49 no.3
• /
• pp.241-252
• /
• 2016

In this study, the characteristics of flow and bed changes with variation of space and length of serial spur dikes were investigated with 2 dimensional numerical simulation. Upstream spur dike was affected by flow and made a role as a single spur dike. As time increased, local scouring was developed around outside of spur dike, and migrated upstream. The aggradation of the bed at the back of spur-dike was made at the initial stage of experiment and numerical modelling. However, the aggradation of the bed was increased in the downstream area. The scour whole around a spur dike upstream was not deep as the Dimensionless spur-dike interval (b) of the dike increased. The depth of scour hole was nearly constant at the dynamic equilibrium state. The dimensionless scour depth ($y_s/H$) increased with L/b. The spur dike downstream had the characteristics of single spur dike as the L/b was larger than 10. However, the spur dike downstream was affected by the dike upstream as the L/b was less than 4, and the bed of the upstream in the spur dike was aggradated and the effects of the serial spur dikes on the bed decreased.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.320-333
• /
• 2019

In this study, a physics-based 3D morphology model for the estimation of an erosion rate of nourished beach is newly proposed. As a hydrodynamic module, IHFOAM toolbox having its roots on the OpenFoam is used. On the other hand, the morphology model comprised a transport equation for suspended sediment, and Exner type equation derived from the viewpoint of sediment budget with the bed load being taken to accounted. In doing so, the incipient motion of sediment is determined based on the Shields Diagram, while the bottom suspended sediment concentration, the bed load transport rate is figured out using the bottom shearing stress directly calculated from the numerically simulated flow field rather than the conventional quadratic law and frictional coefficient. In order to verify the proposed morphology model, we numerically simulate the nonlinear shoaling, breaking over the uniform beach of 1/m slope, and its ensuing morphology change. Numerical results show that the partially skewed, and asymmetric bottom shearing stresses can be successfully simulated. It was shown that sediments suspended and eroded at the foreshore by wave breaking are gradually drifted toward a shore and accumulated in the process of up-rush, which eventually leads to the formation of swash bar. It is also worth mentioning that the breaker bar formed by the sediments dragged by the back-wash flow which commences at the pinnacle of up-rush as the back-wash flow gets weakened due to the increased depth was successfully duplicated in the numerical simulation.