• Fashion & Textile Research Journal
• /
• v.22 no.3
• /
• pp.349-356
• /
• 2020

This study provides information on how to improve the wearing sensation and the fit of slim-fit jeans through an analysis of actual wearing conditions and dissatisfaction. The study is based on a questionnaire survey. A survey was conducted on 296 women in their 20s living in Korea to analyze wearing dissatisfaction with slim-fit jeans. The study used descriptive statistics for analysis using SPSS Statistics Ver.23. Surveys on the actual situation of wearing jeans and level of dissatisfaction indicated that most women in their 20s mainly wore slim-fit jeans and were aware of the size of their jeans. Most tended to double-check the size of the jeans, indicating that the inaccurate sizing system of slim-fit jeans caused confusion for consumers. In addition, the results of the survey on the most considered parts of the body when consumers buy jeans are waist, thigh and leg length. They insisted that their waists were thin and their thighs were thicker than their waists; so their pants would not fit and they were obese. There is a problem between waist size and thigh size; therefore, it is necessary to develop new patterns for slim-fit jeans with improved fit around the waist area that can improve the negative results of surveys on the level of dissatisfaction, indicating discomfort in the waist, belly, and thigh areas while wearing slim-fit jeans.

• Journal of the Korean Home Economics Association
• /
• v.41 no.9
• /
• pp.17-29
• /
• 2003

The objective of this study is to investigate the fit preference tendency for ready-to-wears(jackets, skirts, and slacks) of adult women and to find out the respective differences by the age range and the obesity level. The study method was the questionnaire survey with the subjects of 699 women of 20 up to 59 years of age. The questionnaire is composed of fit preference tendency, physical measurements, age, and occupation. For the data analysis, SPSS 90. program was used, and descriptive statistics, Crosstabs, ANOVA, Duncan's test, and t-test were conducted. The findings are as follows. 1. Regarding the fit preferred for each part of jackets, skirts, and slacks, among ready-to-wears, the 'thing with some extra width' in every part was most favored, followed by the 'thing fitting perfectly'. 2. The differences were found in the fit preference tendency by the age of adult women. The fit preference tendency was higher among those in their 20's than among those of the other age range, and those in their 30's and 40's preferred the clothes with less extra width in comparison with those in their 50's. 3. The differences were also found in the fit preference tendency by the obesity level of adult women. The fit preference tendency was high in the order of the emaciation, normalcy, and obesity types. 4. The fit preference tendency was found to be more affected by the obesity level than by the age. The fit preference tendency by the obesity level of each age range showed the differences in all of the age range. However, the normal type did not show the preference difference among the age ranges, in the fit preference tendency by the age range of each obesity level. Clothing manufacturing firms should understand the characteristics of consumers, such as their age, body type, extra width preferred, to provide the consumers of target market with suitable leeway, and they should design the clothing products which meet up these needs in style and silhouette.

• Korean Journal of Human Ecology
• /
• v.23 no.6
• /
• pp.1171-1189
• /
• 2014

In order to provide the basic data for creating the environment which can efficiently reflect prefer fit along with body size when selecting clothes size in the indirect purchasing environment, this study analyzed the difference of ready-made jacket part-specific fit preferred by fashion models in their twenties and female college students. This study was to analyze the impact of body size, recognition of body part-specific characteristics shape, body satisfaction on prefer fit of jacket. As for the difference of prefer fit depending on the body size, female college students preferred more loose fit than models. The difference according to recognition of body part-specific characteristics shape turned out to be significant for prefer fit depending on the degree of bend of neck, arm length, bend of back recognition and matching fit was found to be preferred as they recognize their body shape to be normal and the difference according to body satisfaction appeared to be significant in the terms of bend of back, hip width/protrusion, torso size/length, sleeve length, whole body shape and they turned out to prefer matching fit as they are satisfied with their body. As shown above, body size, recognition of body part-specific characteristics shape, especially body satisfaction have a great influence on prefer fit of jacket and therefore, if preparing for a size selection step according to body shape and satisfaction in the jacket size selection process, customers' satisfaction in jacket size may be improved and it is considered to be helpful for both consumers and sellers.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.63-69
• /
• 2019

Soldering technology has been used in electronic industry for a long time. However, due to solder fatigue characteristics, automotive electronics are searching the semi-permanent interconnection technology such as press-fit method. Press fit interconnection is a joining technology that mechanically inserts a press fit metal terminal into a through hole in a board, and induces a strong bonding by closely contacting the inner surface joining of the through hole by plastic deformation of press-fit terminal. In this paper, the bonding properties of press-fit interconnection are investigated with PCB hole size and surface finishes. In order to compare interconnection reliability between the press fit and soldering, the change in resistance of the press-fit and soldering joints was observed during thermal shock test. After thermal cycling, the failure modes are investigated to reveal the degradation mechanism both press-fit and soldering technology.

• Safety and Health at Work
• /
• v.10 no.3
• /
• pp.370-376
• /
• 2019

Background: Respirator fit testing is a method to assess if the respirator provides an adequate face seal for the worker. Methods: Workers from four Norwegian smelters were invited to participate in the study, and 701 respirator fit tests were performed on 127 workers. Fourteen respirator models were included: one FFABE1P3 and 11 FFP3 respirator models produced in one size and two silicone half masks with P3 filters available in three sizes. The workers performed a quantitative fit test according to Health and Safety Executive 282/28 with 5-6 different respirator models, and they rated the respirators based on comfort. Predictors of overall fit factors were explored. Results: The pass rate for all fit tests was 62%, 56% for women, and 63% for men. The silicone respirators had the highest percentage of passed tests (92-100%). The pass rate for the FFP3 models varied from 19-89%, whereas the FFABE1P3 respirator had a pass rate of 36%. Five workers did not pass with any respirators, and 14 passed with all the respirators tested. Only 63% passed the test with the respirator they normally used. The mean comfort score on the scale from 1 to 5 was 3.2. The respirator model was the strongest predictor of the overall fit factor. The other predictors (age, sex, and comfort score) did not improve the fit of the model. Conclusion: There were large differences in how well the different respirator models fitted the Norwegian smelter workers. The results can be useful when choosing which respirators to include in respirator fit testing programs in similar populations.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.2
• /
• pp.14-24
• /
• 1990

A Study is made on shrink fit shaft in which its part is modelled and spring stiffness per unit length is estimated, then obtained transfer matrix. Transfer matrix of shaft is found by Myklestad's method and natural frequency is found by shrink fit tolerance on shrink fit shaft, too. In order to verify effectiveness of shrink fit effect, hollow shaft of the same size is compared with shrink fit shaft which will verified on experiment. As a result of this study, the more shrink fit tolerance increases, the more spring stiffness per unit length increases. It is obvious from the above results that shrink fit shaft due to shrink fit tolerances decreases natural frequency.

• Human Ecology Research
• /
• v.54 no.3
• /
• pp.279-292
• /
• 2016

This research predicted the fit of the basic bodice patterns worn on adolescent girls' 3-dimensional scanned bodies. Six 3-dimensional scanned bodies were selected from the sixth Size Korea data. Each of them had good body posture and represented one of the three garment sizes: 79-160, 82-160, and 85-160. Experimental basic bodice patterns were drafted by three basic bodice pattern making methods. The fit of the basic bodice pattern was analyzed by the CLO 3D virtual clothing system. The results showed that the experimental basic bodice patterns did not fit well at the neck, shoulder, and back for adolescent girls. The fit of the basic bodice patterns varied by pattern making method or size. The basic bodice pattern A with the waist darts ending above the breast line showed the best fit among the three different types of experimental pattern. Among the three sizes 79-160, 82-160, and 85-120, size 79-160 basic bodice pattern showed the worst fit for adolescent girls. The results show that the placement and size of the bodice darts affect the basic bodice pattern fit. The basic bodice pattern making method of size 79-160 for adolescent girls should be studied in a future study.

• Journal of Korean Academy of Nursing Administration
• /
• v.19 no.3
• /
• pp.361-371
• /
• 2013

Purpose: This study was done to investigate the factors affecting organizational commitment and turnover intention of hospital nurses. Empirical analysis on the mediating effect of the person-environment fit of organizational commitment and turnover intention and factors affecting this relationship were also examined. Methods: Participants were nurses working in 4 university hospitals in Seoul or Busan. Data were collected between July 27 and Aug. 10, 2012 and for the final analysis, 393 data sets were used. The fitness of models were tested using AMOS 19.0. Results: The fitness of the modified model showed high compatibility with the empirical data. In the modified model, organizational climate, professional self-concepts and person-organization fit were found to have significant effects on hospital nurses' organizational commitment. Professional self-concepts, personality, person-organization fit and person-job fit significantly affected hospital nurses' turnover intention. There was the mediating effect of person-organization fit between organizational commitment and turnover intention and factors affecting the relationship. But person-job fit was not found to have a mediating effect. Organizational commitment accounted for 49.8% and turnover intention for 39.9% of covariance in these factors. Conclusion: Nursing strategy for enhancing professional self-concepts and person-organizational fit should be planned by nursing managers.

• Journal of the Korean Society of Safety
• /
• v.33 no.2
• /
• pp.52-60
• /
• 2018

This study compares the differences of the fit factor by the order of wearing preference between Particulate filtering facepiece respirators(PFFR) and glasses when participants wore simultaneously and a survey of physical and visual complaint. Recognition level about fit of respirators was investigated and the educational (before- and after-) effect of the fit factor. When participants wore PFFR and glasses, physical complaints were nose pressure, slipping, nose and ear pressure, ear pressure and rim loosen, the most highly physical complaints were nose pressure. Visual complaints were demister, blurry vision, dizziness, visual field, and lens dirty, the most highly visual complaints were demister. But, there was significant difference in physical complaint such as nose pressure(10.3%), slipping (23.0%), nose and ear pressure(14.3%), and rim loosen(16.2%), visual complaint such as visual field(13.8%) and lens dirty(32.4%). For the recognition of fit of respirators, respirators fitness, leak site, an initial point and an object, faulty factor, recognition level was higher. Fit factor was increased after education of proper wearing of respirator. Change of the fit factor was smaller compared to the normal breathing and after 6 actions in case of after education. Questionnaire consisted of general characteristics and physical/visual complaint, recognition of fit. Complaints were measured after the QNFT with multiple choices. Quantitative fit factor was measured by device and compared the result of (before- and after-) educational effect. Also, we selected to 6 actions (Normal breathing, Deep breathing, Bending over, Turning head side to side, Moving head up and down, Normal breathing) among 8 actions OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The fit factor was higher after the training (p=0.000). Descriptive statistics, paired t-test, and Wilcoxon analysis were performed to describe the result of questionnaire and fit test. (P=0.05) Therefore, it is necessary to investigate the quantitative research such as training program and glasses fitting factor about the wearing of PFFR and glasses simultaneously.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.961-970
• /
• 2014

Several retailers such as Target and Kohle's and their vendors have piloting the 3D clothing simulation programs to produce garment samples. However, few studies have verified the virtual fit information and 3d visualization process for pants, and no study compared the commercial 3D virtual programs. This study is designed to analyze similarity of fit and appearance between real pants with 3D virtual pants based on three 3D virtual programs (Optitex, CLO 3D, and i-Designer), three lower body types (slim, normal, and thick waist type), and fit status. We selected a representative model for each lower body type, produced their custom pants according to Lee and Nam's method(2007), and took photos of front, side and back view for visual analysis. Then, we virtually tried each model's custom pants on her parametric avatar developed by manually inputting their body measurements using the three 3D virtual program. Thirty fit experts compared the real fit to virtual fit. This study found that 'Optitex' and 'i-Designer' can visualize more effectively than 'CLO 3D' in many fit locations. Regarding the body types, 3D virtual program can visualize pants fit for 'thick waist body type' more preciously than the other body types. With respect to fit status, it does not affect much on the similarity overall.